AN13208A Electronics Datasheet Pdf gdcy.net-Free DataSheet Search and Download Site





Electronic Component Manufacturers DataSheet Search and Download Site.


	Part Number	Reference Price
	Product Description	Full Text Search

Mirror site: www.ic-on-line.com www.ic-on-line.net
IC-ON-LINE Home	Classified Catalogue	Manufacturer List
Standard Pack	Link Exchange	Search Download API
		New version
WebSite Server A	WebSite Server B	WebSite Server C

Datasheet Search

Full Text Search

Reference Price

Check Stock

AN13208A

AN13208A DataSheet Panasonic Semiconductor 3-ch. video driver IC supporting HD with charge pump

3-ch. video driver supporting with charge pump

Panasonic Semiconductor

455.014 Kb

17 Pages

Maker Site:
http://www.panasonic.co.jp/semicon/e-index.html

Panasonic Semiconductor

AN13208A.File Click here to View
AN13208A.File Right Click here to Save

AN13208A Datasheet Download Server A

AN13208A Datasheet Download Server B

AN13208A Datasheet Download Server C

AN13208A Datasheet Download Server D

AN13208A.File Click here To Preview

---Full Text Search Engine--- AN13208A Panasonic Semiconductor
---Full Text Search Engine--- 3-ch. video driver supporting with charge pump

AN13208A

DATA SHEET
Part No. Package Code No.
AN13208A
ULGA020-L-0404
Publication date: October 2008
SDB00159BEB
1
AN13208A Contents
Overview . 3 Features . 3 Applications . 3 Package . 3 Type .. 3 Application Circuit Example (Block Diagram) Pin Descriptions . 4 . 5
Absolute Maximum Ratings . 6 Operating Supply Voltage Range . 6 Electrical Characteristics . 7 Electrical Characteristics (Reference values for design) . 9 Technical Data . 10 * I/O block circuit diagrams and pin function descriptions * Operation table (LPFs) * PD  Ta diagram . 10 . 14
. 15
Usage Notes . 16
SDB00159BEB
2
AN13208A
AN13208A
3-ch. video driver IC supporting HD with charge pump
Overview
AN13208A is a 75  video driver IC supporting HD (high-definition) which can operate by 3.25 V of supply voltage. Negative voltages generated by built-in charge pump circuit enable DC direct output, and output capacitor which is needed previously is not required. Also, it improves the output dynamic range which was difficult by a single supply. Furthermore, it incorporates various filters for D pin outputs and control switches, which allows 75  driving by 3 output systems of Cy, Cb, Cr or Py, Pb, Pr.
Features
Supply voltage 3.25 V, 75  driver for 3-ch. video 3 output systems of Cy, Cb, Cr or Py, Pb, Pr Supports D4 (720P) 3 modes of filter selector switches Built-in stand-by mode Output capacitor is unnecessary by generating negative voltage from charge pump circuit. Wide output dynamic range
Applications
Video output for portable equipments such as DSC and DVC
Package
20 pin fine pitch land grid array package (LGA type)
Type
Bi-CMOS IC
SDB00159BEB
3
AN13208A
Application Circuit Example (Block Diagram)
Pr-in Filter SW1 1 F 15 Standby SW 16 BIAS 14 13 12 Filter SW2 GND_C
Pr-out
3.25 V Power supply 75 
11 10
LPF 6 MHz/15 MHz LPF through
VCC_C (Pb, Pr) 4.7 F
Pb-in 1 F
17 18
BIAS
LPF 6 MHz/15 MHz LPF through
9
75  VCC_Y (Py)
Pb-out
VCC
8
4.7 F Py-in 1 F 19 LPF 12 MHz/30 MHz LPF through 7 75  Py-out
BIAS
VDD
20
Charge pump 1 2 3 4 5
6
2.2 F
4.7 F
4.7 H 4.7 F
SDB00159BEB
4
AN13208A
Pin Descriptions
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin name CLKP GND_PUMP CLKN VSS SUB GND_Y Py-out VCC_Y Pb-out VCC_C Pr-out GND_C Filter SW2 Filter SW1 Pr-in Standby SW Pb-in VCC Py-in VDD Type Output Ground Output Output Input Ground Output Power supply Output Power supply Output Ground Input Input Input Input Input Power supply Input Power supply Clock output pin (+) GND (for charge pump) Clock output pin (-) Negative voltage generation pin SUB potential GND (for Py) Output pin for Py VCC (for Py) Output pin for Pb VCC (for Pb/Pr) Output pin for Pr GND (for Pb/Pr) Filter selector switch2 Filter selector switch1 Input pin for Pr ON/OFF selector switch Input pin for Pb VCC Input pin for Py VDD (for charge pump) Description
SDB00159BEB
5
AN13208A
Absolute Maximum Ratings
A No. 1 2 3 4 5 Parameter Supply voltage Supply current Power dissipation Operating ambient temperature Storage temperature Symbol VCC ICC PD Topr Tstg Rating 4.1 -- 137 -20 to +75 -55 to +125 Unit V A mW C C Note *1 -- *2 *3 *3
Note) *1: The range under absolute maximum ratings, power dissipation. *2: Power dissipation shows the value of only package at Ta = 75C. When using this IC, refer to the * PD - Ta diagram in the Technical Data and use under the condition not exceeding the allowable value. *3: Expect for the storage temperature and operating ambient temperature, all ratings are for Ta = 25C.
Operating Supply Voltage Range
Parameter Supply voltage range Symbol VCC Range 2.7 to 3.6 Unit V Note --
Note) The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
SDB00159BEB
6
AN13208A
Electrical Characteristics at VCC = 3.25 V
Note) Ta = 25C2C unless otherwise specified.
B No. Circuit current 1 2
Parameter
Symbol
Conditions
Limits Min Typ Max
Unit
Note
Circuit current at non-signal (Wide mode) Circuit current in power saving mode
Icc1 ICCST
 V13 = V14 = V16 = 0 V
 
50 
70 10
mA A
 
Mode control 3 4 5 6 7 8 Low state hold voltage range for filter selector switch1 High state hold voltage range for filter selector switch1 Low state hold voltage range for filter selector switch2 High state hold voltage range for filter selector switch2 Stand-by OFF hold voltage Stand-by ON hold voltage SWL1 SWH1 SWL2 SWH2 VthST VthON       0 2.1 0 2.1 0 2.1       0.6 3.25 0.6 3.25 0.6 3.25 V V V V V V      
Driver characteristics: Wide mode 9 10 11 Input/output gain (Py, wide mode) Pb output gain difference (Pb-Py, wide mode) Pr output gain difference (Pr-Py, wide mode) Py1 Pb1 Pr1 f = 3.58 MHz f = 3.58 MHz f = 3.58 MHz 5.65 - 0.5 - 0.5 6.15 0 0 6.65 0.5 0.5 dB dB dB   
Driver characteristics: Narrow mode 12 13 14 Input/output gain (Py, narrow mode) Pb output gain difference (Pb-Py, narrow mode) Pr output gain (Pr-Py, narrow mode) Py1 Pb1 Pr1 f = 3.58 MHz f = 3.58 MHz f = 3.58 MHz 5.65 - 0.5 - 0.5 6.15 0 0 6.65 0.5 0.5 dB dB dB   
Py frequency characteristics 15 16 17 18 Pya frequency character 1 (Wide mode) Pya frequency character 2 (Wide mode) Pyb frequency character 1 (Narrow mode) Pyb frequency character 2 (Narrow mode) Pya-f1 Pya-f2 Pyb-f1 Pyb-f2 f = 30 MHz /3.58 MHz f = 50 MHz /3.58 MHz f = 15 MHz /3.58 MHz f = 27 MHz /3.58 MHz -3.5 -- -4 -- - 0.3 -13 -1 -20 1.5 - 4.5 1 -8 dB dB dB dB    
SDB00159BEB
7
AN13208A
Electrical Characteristics at VCC = 3.25 V (continued)
Note) Ta = 25C2C unless otherwise specified.
B No.
Parameter
Symbol
Conditions
Limits Min Typ Max
Unit
Note
Pb frequency characteristics 19 20 21 22 Pba frequency character 1 (Wide mode) Pba frequency character 2 (Wide mode) Pbb frequency character 1 (Narrow mode) Pbb frequency character 2 (Narrow mode) Pba-f1 Pba-f2 Pbb-f1 Pbb-f2 f = 15 MHz /3.58 MHz f = 37 MHz /3.58 MHz f = 8 MHz /3.58 MHz f = 18 MHz /3.58 MHz -4 -- -4 -- 0 -25 - 0.2 -16 1 -8 1 -6 dB dB dB dB    
Pr frequency characteristics 23 24 25 26 Pra frequency character 1 (Wide mode) Pra frequency character 2 (Wide mode) Prb frequency character 2 (Narrow mode) Prb frequency character 2 (Narrow mode) Pra-f1 Pra-f2 Prb-f2 Prb-f2 f = 15 MHz /3.58 MHz f = 37 MHz /3.58 MHz f = 8 MHz /3.58 MHz f = 18 MHz /3.58 MHz -4 -- -4.0 -- 0 -25 - 0.2 -16 1 -8 1 -6 dB dB dB dB    
SDB00159BEB
8
AN13208A
Electrical Characteristics (Reference values for design) at VCC = 3.25 V
Note) Ta = 25C2C unless otherwise specified. The characteristics listed below are reference values for design of the IC and are not guaranteed by inspection. If a problem does occur related to these characteristics, Panasonic will respond in good faith to user concerns.
B No.
Parameter
Symbol
Conditions
Limits Min Typ Max
Unit Note
Py, Pb, Pr frequency characteristics 27 28 29 30 31 32 Pya frequency character 3 (Wide mode) Pyb frequency character 3 (Narrow mode) Pba frequency character 3 (Wide mode) Pbb frequency character 3 (Narrow mode) Pra frequency character 3 (Wide mode) Prb frequency character 3 (Narrow mode) Pya-f3 Pyb-f3 Pba-f3 Pbb-f3 Pra-f3 Prb-f3 f = 74 MHz /3.58 MHz f = 54 MHz /3.58 MHz f = 54 MHz /3.58 MHz f = 54 MHz /3.58 MHz f = 54 MHz /3.58 MHz f = 54 MHz /3.58 MHz -- -- -- -- -- -- -40 -50 -40 -45 -40 -45 -30 -30 -30 -30 -30 -30 dB dB dB dB dB dB      
Py, Pb, Pr output characteristics 33 34 35 36 37 38 39 40 41 42 43 44 Py output 2nd distortion Py output 3rd distortion Pb output 2nd distortion Pb output 3rd distortion Pr output 2nd distortion Pr output 3rd distortion S/N DG DP Cross talk Output D-range Input D-range Py-Dis2 Py-Dis3 Pb-Dis2 Pb-Dis3 Pr-Dis2 Pr-Dis3 SNR DG DP CT DROUT DRIN VIN = 1.0 V[p-p], f = 3.58 MHz VIN = 1.0 V[p-p], f = 3.58 MHz VIN = 1.0 V[p-p], f = 3.58 MHz VIN = 1.0 V[p-p], f = 3.58 MHz VIN = 1.0 V[p-p], f = 3.58 MHz VIN = 1.0 V[p-p], f = 3.58 MHz white50%, 100 kHz-4.2 MHz, Trap = off VIN = 1.0 V[p-p], 10 STEP VIN = 1.0 V[p-p], 10 STEP 5 MHz f = 1 MHz f = 1 MHz -- -- -- -- -- -- 60 -- -- -- -- -- -45 -60 -45 -60 -45 -60 -- 1 1 -- 4.0 2.0 -40 -40 -40 -40 -40 -40 -- -- -- -50 -- -- dB dB dB dB dB dB dB % DEG dB V V            
SDB00159BEB
9
AN13208A
Technical Data
* I/O block circuit diagrams and pin function descriptions Pin No. Waveform and voltage
20 VCC PUMP
Note) The characteristics listed below are reference values based on the IC design and are not guaranteed.
Internal circuit
2 GND PUMP
Impedance
Description
1
VDD

Generated negative voltage output pin 1
GND
1
2
GND

GND for charge pump
3
GND

Generated negative voltage output pin 2
VSS
4
4
VSS

Negative voltage generation pin
5
5
VSS

SUB potential
6
GND

GND (for Py)
SDB00159BEB
10
AN13208A
Technical Data (continued)
* I/O block circuit diagrams and pin function descriptions (continued) Pin No. Waveform and voltage
Note) The characteristics listed below are reference values based on the IC design and are not guaranteed.
Internal circuit
8 VCC_Y
Impedance
Description
7
7
During operation 10  or less
Py-out
VSS SUB
5
8
VCC

VCC (for Py)
10
VCC_C
9
9
During operation 10  or less
Pb-out
VSS SUB
5
10
VCC

VCC (for Pb/Pr)
10 VCC_C
11
11
During operation 10  or less
5
Pr-out
VSS SUB
12
GND

GND (for Pb/Pr)
SDB00159BEB
11
AN13208A
Technical Data (continued)
* I/O block circuit diagrams and pin function descriptions (continued) Pin No. Waveform and voltage
18
Note) The characteristics listed below are reference values based on the IC design and are not guaranteed.
Internal circuit
VCC
Impedance
Description
VCC
13
13
200 k
Filter control switch 2
GND
VCC
VCC
14
18
14
200 k
Filter control switch 1
GND
15
15
VSS SUB 5
130 k
Pr-in
20
VCC_PUMP
VCC
16
16
200 k
Stand-by control switch 1
GND
17
130 k
Pb-in
18
VCC

VCC
SDB00159BEB
12
AN13208A
Technical Data (continued)
* I/O block circuit diagrams and pin function descriptions (continued) Pin No. Waveform and voltage
19
Note) The characteristics listed below are reference values based on the IC design and are not guaranteed.
Internal circuit
Impedance
Description
19
VSS SUB 5
130 k
Py-in
20
VCC

VDD (for charge pump)
SDB00159BEB
13
AN13208A
Technical Data (continued)
Operation table (LPFs) Pin setting Pin 16 Standby SW Pin 14 Filter SW1 0 0 1 Pin 13 Filter SW2 0 1 0 1 0 1 0 1 Stand-by (normal) (Stand-by) (Stand-by) (Stand-by) Circuit operation (LPF1: Wide) Circuit operation (LPF2: Narrow) Circuit operation (Through: Filter through mode) Circuit operation (Through: Filter through mode) Operating conditions
0 1 1
SDB00159BEB
14
AN13208A
Technical Data (continued)
* PD  Ta diagram
SDB00159BEB
15
AN13208A
Usage Notes
1. Carry out the thermal design with sufficient margin such that the power dissipation will not be exceeded, based on the conditions of power supply, load and ambient temperature. The absolute maximum ratings are values which should not be exceeded in any use or test conditions. 2. Pay attention in the pattern layout in order to prevent damage due to short circuit between pins. In addition, refer to the Description for the pin configuration. 3. Be sure not to mount the LSI in the reverse direction onto the PCB. It might be damaged when the electricity is turned on. 4. Perform a visual inspection on the PCB before turning on the power supply, otherwise damage might happen due to problems such as a solder-bridge between the pins of the semiconductor device. Also, perform a full technical verification on the assembly quality, because the same damage possibly can happen due to conductive substances, such as solder ball, that adhere to the LSI during transportation. 5. Take notice in the use of this product that it might break or occasionally smoke when an abnormal state occurs such as power fault, i.e., output pins, Pin4 (CP negative voltage output), or Pin5 (SUB potential) short to the power supplies. And, safety measures such as an installation of fuses are recommended because the extent of the above-mentioned damage and smoke emission will depend on the current capability of the power supply. 6. When using the LSI for model deployment or new products, perform fully safety verification including the long-term reliability for each product. 7. This IC has a built-in charge pump which generates PCB voltage (negative voltage) inside the IC. As the fin of this IC is connected to the PCB, it might be damaged or emit smoke when a voltage including GND is applied. Pin
SDB00159BEB
16
Request for your special attention and precautions in using the technical information and semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. - Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805