| |
|
 |
Fairchild
|
| Part No. |
DM74ALS14
|
| OCR Text |
...ltages using a 50 coaxial cable plugged into a standard SMB type connector on the test fixture. Do not use an active FET probe. Dual Trace Oscillo* Verify that the GND reference recorded on the oscilloscope has not drifted to ensure the acc... |
| Description |
Hex Inverter with Schmitt Trigger Inputs
|
| File Size |
69.34K /
6 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Simatic
|
| Part No. |
6ES7-332-5HD01-0AB0
|
| OCR Text |
...n nector. When the connector is plugged in for the first time, a coding element engages so that the connector can only be plugged into modules of the same type. When the module is replaced, the front connector can be used in its fully wired... |
| Description |
S7-300 Analog Input/Output Modules
|
| File Size |
194.37K /
10 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1660EVKIT
|
| OCR Text |
...ptional). Or, the EV kit can be plugged directly into the parallel printer port.
3) The MAX1660.EXE software program can be run from the floppy or from a hard drive. Simply use the Windows program manager to run the program. If desired, ... |
| Description |
Evaluation Kit for the MAX1660
|
| File Size |
186.22K /
12 Page |
View
it Online |
Download Datasheet |
| |
|
|
Silicon Laboratories Inc.
|
| Part No. |
AN315
|
| OCR Text |
...d across carpeting before being plugged in. While there is no standards-based test for this, a uniform test procedure has been described[1]. A Si3400 PD evaluation board was tested using this procedure with the test diagram shown in Figure ... |
| Description |
ROBUST ELECTRICAL SURGE IMMUNITY FOR POE PDS THROUGH INTEGRATED PROTECTION
|
| File Size |
151.30K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
Atmel
|
| Part No. |
AT73C202
|
| OCR Text |
...ne is turned on or a charger is plugged in). The battery pre-charge is also integrated and self-operated by the AT73C202. On completion the fast charge and end-of-charge procedure is transferred to the baseband software. The AT73C202 integr... |
| Description |
Power and Battery Management Standard Product
|
| File Size |
182.57K /
21 Page |
View
it Online |
Download Datasheet |
| |
|
|
Agilent (Hewlett-Packard)
|
| Part No. |
AFKC-XXXXD AFKC-XXXXE AFKA-0006 AFKA-0001 AFKA-0002
|
| OCR Text |
... transfer mode. With the module plugged in the microcontroller is powered on by default, and always accessible. Connect Module Enable to +3.3V TTL logic high to enable the remaining on board electronics, and connect to TTL logic low to disa... |
| Description |
AFKC-XXXXD · 2.7 Gb/s Pluggable DWDM Transceiver, 100 km
AFKC-XXXXE · 2.7 Gb/s Pluggable DWDM Transceiver, 160 km
AFKA-0006 · Evaluation Kit for the 2.7 Gb/s Pluggable DWDM Transceiver
AFKA-0001 · Rail mechanism for AFKC series
AFKA-0002 · EMI kennel for AFKC series
|
| File Size |
145.98K /
12 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim Integrated Products, Inc.
|
| Part No. |
DS3144DK
|
| OCR Text |
...erboard or other daughter cards plugged into the DK2000. PCM_RXCLK, PCM_RXD, and PCM_RSYNC are clock/data/sync lines over which the DS3144DK can receive a DS3/E3 data stream from the DK2000 or a daughter card plugged into the DK2000. See th... |
| Description |
Quad DS3/E3 Framer Design Kit Daughter Card
|
| File Size |
973.46K /
20 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
