| |
|
 |
TE Connectivity Ltd
|
| Part No. |
411-18235 0-744003-5
|
| OCR Text |
...s, with the chamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten the screw so that the die is held in place, but do not tighten the screw completely at this point. 4. ... |
| Description |
This ERGOCRIMP Die is suitable to crimp the following crimp contacts
|
| File Size |
93.10K /
11 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
TE Connectivity Ltd
|
| Part No. |
0-519151-9 411-18231 0-744003-1
|
| OCR Text |
...s, with the chamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten the screw so that the die is held in place, but do not tighten the screw completely at this point. 4. ... |
| Description |
This ERGOCRIMP Die is suitable to crimp the following crimp contacts
|
| File Size |
94.65K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
90758-2 90758-1
|
| OCR Text |
...tance center at 1-800-722-1111. front of tool (locator side) te die assembly te locator assembly? contact family? wire size (awg) insul di...facing you. squeeze tool handles together and allow them to open fully. 2. holding the contact by ... |
| Description |
PRO-CRIMPER III Hand Crimping Tool Assembly
|
| File Size |
311.15K /
5 Page |
View
it Online |
Download Datasheet |
| |
|
|
Red Lion Controls. Inc
|
| Part No. |
RPGFC002 RPGFC004 CCARPG00 CCARPG25
|
| OCR Text |
...p 1/2" npt conduit thd top view front view bottom view 3 (76.2) 6 (152.4) 3 (76.2) .375 dia. shaft .75 long, 303 stainless steel 1/4" - 20 t...facing encoder shaft (as shown). apply thread locking material to wheel set screw threads during ... |
| Description |
MODELS ZBG AND ZBH STANDARD DUTY ENCODER
|
| File Size |
732.22K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
90759-2 90759-1
|
| OCR Text |
...t wheel moving jaw die assembly front of tool (locator side) stationary jaw back of tool (wire side) pivot pin pro--crimper iii hand crimpin...facing you. squeeze tool handles together and allow them to open fully. 2. holding the contact by th... |
| Description |
PRO-CRIMPER III Hand Crimping Tool Assembly
|
| File Size |
240.37K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Johanson Technology Inc...
|
| Part No. |
2450BM14E0007
|
| OCR Text |
...impedance-matched integrtaed rf front end passive balun filter for adf7241 and adf7242 0.004 1.5 db max. 50 ? 2400 - 2500 2450bm14e0007 termination style 2w max. conjugate match to adi adf7241 and adf7242 4,000 2.0 db max. 180 10 9.5 db ... |
| Description |
2.4 GHz Impedance-Matched Integrtaed RF Front End Passive Balun Filter for ADF7241 and ADF7242
|
| File Size |
370.10K /
3 Page |
View
it Online |
Download Datasheet |
| |
|
|
ETC[ETC]
|
| Part No. |
AT-11
|
| OCR Text |
... inches high will work. See the front panel layout for ideas (figure 7). LDG also has custom finished enclosures available for around $30.
...facing you. The flattened side will be right next to one of the leads. You may want to use some sili... |
| Description |
AT-11 Automatic Antenna Tuner
|
| File Size |
227.82K /
15 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
