| PART |
Description |
Maker |
| MAX9051 MAX9039 MAX9041 MAX9052 MAX9042 MAX9053 MA |
4-Bit Binary Full Adders With Fast Carry 16-CFP -55 to 125
"SOT23, Micropower Comparator plus Precision 2.5V Refenece"
" Micropower, Comparator and Reference in UCSP"
"SOT23, Micropower Comparator plus Precision 2.048V Refenece"
" SOT23, Micropower Comparator plus Precision 2.5V Refenece"
"Dual, Micropower Comparator plus Precision 2.048V Refenece"
Micropower, Single-Supply, UCSP/SOT23 Comparator Precision Reference ICs
|
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MAX9967BGCCQ-BOU-D MAX9967BGCCQ-BOUD MAX9967BQCCQ |
Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load DUAL COMPARATOR, 100000 uV OFFSET-MAX, 2.2 ns RESPONSE TIME, PQFP100
|
Maxim Integrated Products, Inc.
Sony, Corp.
MAXIM INTEGRATED PRODUCTS INC
|
| MAX9031AXKT MAX9031AUKT |
Low-Cost, Ultra-Small, Single/Dual/Quad Single-Supply Comparators COMPARATOR, 5000 uV OFFSET-MAX, PDSO5
|
Maxim Integrated Products, Inc.
MAXIM INTEGRATED PRODUCTS INC
|
| AD8598 AD8598AN AD8598AR AD8598ARU |
Dual 7 ns Single Supply Comparator
|
AD[Analog Devices]
|
| NJM2903 |
SINGLE-SUPPLY DUAL COMPARATOR
|
njr
|
| NJM2407 NJM2407R |
SINGLE-SUPLLY DUAL COMPARATOR
|
New Japan Radio Co., Ltd.
NJRC[New Japan Radio]
|
| ADCMP361 |
Single Comparator with 400mV Reference and Dual Polarity Outputs
|
Analog Devices, Inc.
|
| ADCMP361ARJ ADCMP361 |
Single Comparator with 400mV Reference and Dual Polarity Outputs
|
AD[Analog Devices]
|
| LTC1442 LTC1441 LTC1440 144012FA LTC1442CN8 LTC144 |
From old datasheet system
Ultralow Power Single/Dual Comparator with Reference
|
LINER[Linear Technology]
|
| LA6393M LA6393M11 |
For Parallel Comparator Circuits High-Performance Dual Comparator
|
Sanyo Semicon Device
|
|
