| PART |
Description |
Maker |
| STK672-010 |
Unipolar Fixed-Current Chopper(separate excitation)Type 1.7A Output Current Stepping Motor Driver with Built-in 4-Phase Distribution Controller
|
SANYO[Sanyo Semicon Device]
|
| STK672-010 |
Unipolar Fixed-Current Chopper (separate excitation) Type 1.7 A Output Current Stepping Motor Driver with Built-in 4-Phase Distribution Controller
|
SANYO
|
| A1147 A1148LUATI-T A1147ELHLT A1147ELHLT-T A1147EU |
SC Series, 0.50 Ohms, 1.0 W, Fixed, Wirewound Resistor 低电流超灵敏双线斩波稳定单极霍尔效应开
Low Current Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches 低电流超灵敏双线斩波稳定单极霍尔效应开
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| STK672-110 |
STEPPER MOTOR CONTROLLER, 2.65 A, PSIP12
Aluminum Polymer Radial Lead Capacitor; Capacitance: 1800uF; Voltage: 2.5V; Case Size: 8x9 mm; Packaging: Bulk 两相步进电机驱动器（方波驱动）输出电流：1.8
Unipolar Fixed-Current Chopper (Self-Excited PWM) Scheme and Built-in Phase Signal Distribution IC Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A
|
Sanyo Electric Co.,Ltd.
Sanyo Electric Co., Ltd.
SANYO[Sanyo Semicon Device]
|
| A1147EUATI-T A1148LUATI-T A1147LUATI-T A1148EUATI- |
A1147-48 Low Current Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches
|
Allegro MicroSystems
|
| A114006 A118506 A1185ELHLT-T A1143LUATI-T4 A1140 A |
Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches
|
ALLEGRO[Allegro MicroSystems]
|
| A3242LUA-T A3241 A3241ELHLT A3241ELHLT-T A3241EUA |
Chopper-Stabilized Unipolar Hall-Effect Switches
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| A1145EUATI |
Ultrasensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
|
Allegro MicroSystems
|
