| PART |
Description |
Maker |
| BGA310 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 9 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz 3 dB-bandwidth: DC to 2.4 GHz)
|
Siemens Semiconductor Group
|
| KTS1C1S250 |
Typical RDS(on) (N-Channel)=0.9 Typical RDS(on) (N-Channel)=2.1 Gate-source zener diode
|
TY Semiconductor Co., Ltd
|
| TL802A-1 TL801 |
TYPICAL INSTALLATION DIAGRAM
TYPICAL INSTALLATIION DIAGRAM
|
List of Unclassifed Manufacturers
List of Unclassifed Manufac...
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| FMCE-0328 |
Attenuation to 60 db at 500 kHz, typical Operating temperature -55掳 to 125掳C
Attenuation to 60 db at 500 kHz, typical Operating temperature -55° to 125°C
|
Interpoint Corporation Company
|
| F-LAN |
Typical F-1V2A Application
|
THOR communications
|
| HHR-380A BK380A |
Typical charge characteristics
|
Panasonic Semiconductor
|
| NTLJF3117P1 |
Typical Uses for FETKY Devices
|
ON Semiconductor
|
| F-HD-SDI |
Typical F-HD-SDI Application
|
THOR communications
|
| PCA0174A-LF |
PHASE NOISE (1 Hz BW, typical)
|
Z-Communications, Inc
|
| FQD7P20TF |
Low Crss(typical 25 pF)
|
Fairchild Semiconductor
|
