| PART |
Description |
Maker |
| PIC12F PIC16F |
PIC16F/LF182X/PIC12F/LF1822 Memory Programming Specification
PIC16F/LF182X/PIC12F/LF1822 Memory Programming Specification
|
Microchip Technology
|
| Z8F083A0128ZCOG |
Up to 8 KB Flash memory with in-circuit programming capability
|
Zilog, Inc.
|
| MX10E8050IA MX10E8050IAQC MX10E8050IPC MX10E8050IQ |
On-chip Flash program memory with in-system programming
|
MCNIX[Macronix International]
|
| LTC1262-15 |
12V, 30mA Flash Memory Programming Supply
|
Linear Technology
|
| ST662ABD-TR ST662ACD-TR |
DC-DC CONVERTER FROM 5V TO 12V, 0.03A FOR FLASH MEMORY PROGRAMMING SUPPLY
|
ST Microelectronics
|
| MX10E8050IUC MX10E80501 |
On-chip Flash program memory with in-system programming 片上闪存程序存储器在系统编程
|
微控制器/微处理器
Macronix International Co., Ltd.
|
| PIC1845K50 PIC184XK50 PIC18F45K50 PIC18F24K50 PIC1 |
28/40/44-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology
Flash Memory Programming Specification
|
Microchip Technology
|
| ATMEGA8 ATMEGA8L |
8-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 6 or 8 Channel 10-bit A/D-converter. Up to 16 MIPS throughput at 16 Mhz.
8-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 6 or 8 Channel 10-bit A/D-converter. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation
|
Atmel
|
| AN1179 |
ST7 - PROGRAMMING ST7 FLASH MICROCONTROLLERS IN REMOTE ISP MODE (IN-SITU PROGRAMMING)
|
SGS Thomson Microelectronics
|
| ATMEGA64 ATMEGA64L |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation.
|
Atmel
|
| ATMEGA128 ATMEGA128L |
128-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
128-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation.
|
Atmel
|
