PART |
Description |
Maker |
AWT6130 |
The AWT6130 provides the additional output power margin RF designers need to overcome additional post-PA insertion loss in tri-mode ... Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module
|
Anadigics Inc ANADIGICS, Inc
|
ST19AF08 |
Smartcard MCU With 4 additional I/0
|
STMICROELECTRONICS[STMicroelectronics] ST Microelectronics
|
SM39R08A5 |
Additional Baud Rate Generator
|
SyncMOS Technologies,In...
|
VCE1 |
Additional Standard Crystal Oscillators
|
Vectron
|
AN1383 |
ADDITIONAL FEATURES OF THE M50FW080 8 MBIT FIRMWARE HUB
|
SGS Thomson Microelectronics
|
F16013 |
~35° medium beam. Clean appearance with no additional attachment interface and compatible
|
Ledil, Inc.
|
2200173 |
Additional labeling of PCB with Phoenix Contact PMB module marker carrier (drill hole diameter 4 mm)
|
PHOENIX CONTACT
|
PS222S |
3-Channel Secondary Monitoring IC With Over-Current Protection And an Additional 12V OCP Channel
|
Electronic Theatre Controls, Inc.
|
PS236 |
3-Channel Secondary Monitoring IC With an Additional OCP Channel
|
Silicon Touch Technology Inc.
|
SP3051 |
The SP3051 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events.
|
Littelfuse
|
0850481782 85048-1782 |
2.54mm (.100) Pitch DIN 41612/IEC 603-2 Mixed Layout Connector, Through Hole, Vertical, Female Style M, with 4 additional high current solder contacts, 42 Circuits
|
Molex Electronics Ltd.
|