PART |
Description |
Maker |
AK2125 |
Receiver/ Demodulator for time code signals transmitted by the transmitter DCF77( Germany) ,MSF(UK), or WWVB(USA) From old datasheet system Radio Controlled Clock Receiver
|
List of Unclassifed Manufacturers ETC[ETC] Electronic Theatre Controls, Inc. Gunter Seniconductor GmbH.
|
C5315 C5315SV033RFPA1666.5143MHZ C5315SV050RFPA166 |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 624.629 MHz SMD, 6 PIN VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 644.5313 MHz SMD, 6 PIN VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 666.5143 MHz SMD, 6 PIN 2, 5, 10 Gbit/s standard Sonet / SDH Voltage Controlled Crystal Oscillator
|
Vectron International, Inc.
|
VS-751-LFF-HNN-R4-R6 VS-751-LFF-GNN-PB-R3 VS-751-L |
VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 690.5692 MHz VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 657.4219 MHz VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 624.6938 MHz
|
VECTRON INTERNATIONAL
|
D6002 |
RADIO CONTROLLED RECEIVER IC
|
List of Unclassifed Manufacturers ETC[ETC]
|
LM8523 LM8460 LM8471 |
ALARM CLOCK (CLOCK RADIO.ETC)
|
SANYO[Sanyo Semicon Device]
|
TDA9887 TDA9887T_V4 TDA9887HN_V4 TDA9887TS_V4 |
I2C-bus controlled multistandard alignment-free IF-PLL demodulator with FM radio
|
PHILIPS[Philips Semiconductors]
|
ACL-25-40 ACL25 |
Radio Control Clock Antenna
|
Sumida Corporation
|
VCO600A666.5143MHZ VCO600A622.080MHZ VCO600A155.52 |
Voltage Controlled Saw Oscillator VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 311.04 MHz Voltage Controlled Saw Oscillator VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 368.64 MHz
|
Vectron International, Inc.
|
UPD1708G-X13 |
PLL Frequency Synthesizer and Controller for Mobile FM/MW/LW Radio with Clock
|
NEC
|
ACL120B-60K ACL120B-40K ACL120B |
Radio Control Clock Antenna , Pin Type: ACL Series Radio Control Clock Antenna< Pin Type: ACL Series> Radio Control Clock Antenna Pin Type: ACL Series
|
Sumida Corporation
|
UPD2813C |
Clock and Radio Frequency Counter / Display Circuit CMOS LSI Clock And Radio Frequency Counter/Display Circuit CMOS LSI
|
NEC[NEC]
|