| PART |
Description |
Maker |
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| S1T2410B01 S1T2410B02 DS_S1T2410B01 S1T2410B02-D0B |
From old datasheet system
bipolar integrated circuit designed as a telephone bell replacement
Low drain current,Adjustable 2-frequency tone,Built-in hysteresis
bipolar integrated circuit designed as telephone bell replacement
|
SAMSUNG SEMICONDUCTOR CO. LTD.
SAMSUNG[Samsung semiconductor]
Samsung Electronic
|
| H5120NL H5120NLT |
1000base -t magnetics module Designed to Support Gigabit Transceivers
1000base -t magnet ics module Designed to Support Gigabit Transceivers
|
Pulse A Technitrol Company
|
| PE-53112NL PE-53113NL PE-52626 |
Inductors Designed for National’s 50 kHz Simple Switcher
Inductors Designed for Nationals 50 kHz Simple Switcher
|
Pulse A Technitrol Company
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| EVH12140 |
designed specially
|
CSB Battery
|
| STC2G15 STC2G15R |
BCMOS VOLTAGE REGULATOR DESIGNED FOR USE WITH VERY LOW ESR AND TANTALIUM OUTPUT CAPACITOR
BCMOS VOLTAGE REGULATOR DESIGNED FOR USE WITH VERY LOW ESR AND TANTALUM OUTPUT CAPACITOR
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
意法半导
|
| 7344-V2T3-ASVA 7344/V2T3-ASVA |
Specially designed for applications
|
Everlight Electronics Co., Ltd
|
| 7383_G1C3-ATVA_MS 7383_G1C3-ATVAMS 7383_G1C3-ATVA_ |
Specially designed for applications
|
Everlight Electronics Co., Ltd
|
| SF2037B |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
