| PART |
Description |
Maker |
| AIC811 AIC812-46PVTR AIC811-23CVBG AIC811-23CVTR A |
Reset Circuits with Manual Reset Input 复位电路，带有手动复位输
From old datasheet system
4-Pin uP Reset Circuits with Manual Reset Input
|
Analog Integrations, Corp.
AIC[Analog Intergrations Corporation]
Analog Integrations Corporation
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MAX6331 MAX6330 1863 MAX6331_UR-T MAX6330_UR-T MAX |
Precision shunt regulator with reset. Reset threshold 4.63V, shunt regulator voltage 5.0V
1.45-W Mono Class-D Audio Amplifier with 1.8V Compatible Shutdown Voltage (TPA2006) 8-SON -40 to 85
Precision Shunt Regulators with Reset in SOT23-3
From old datasheet system
|
Maxim Integrated Products, Inc.
Maixm
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| S24022SBT S24023SBT S24023P2.7T |
Precision RESET controller and 2K I2C memory with both RESET and non-RESET outputs
|
SUMMIT Microelectronics
|
| PST90XX PST9013 |
IC for System Reset Monolithic IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3
From old datasheet system
|
MITSUMI ELECTRIC CO., LTD.
|
| AP163702 |
Reset and System Startup Configuration via PORT0
From old datasheet system
|
Infineon
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| PST36XX PST35XX |
CMOS System Reset
From old datasheet system
|
Mitsumi
|
