| PART |
Description |
Maker |
| M3500-0305 |
300-500 MHZ TYPICAL OUTPUT FREQUENCY / MODULATION SENSITIVITY VERSUS TUNING VOLTAGE
|
Micronetics, Inc.
|
| M3500-0612 |
600-1200 MHZ TYPICAL OUTPUT FREQUENCY / MODULATION SENSITIVITY VERSUS TUNING VOLTAGE
|
Micronetics, Inc.
|
| MCP6547 MCP6549 MCP6546 MCP6548 MCP6547-I/MS MCP65 |
The MCP6549 is an Open Drain, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the sixteen lead
The MCP6546 is an Open-Drain, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
The MCP6549 is an Open Drain, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
The MCP6547 is an Open Drain, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the eight lead PD
The MCP6546 is an Open-Drain, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the eight lead
The MCP6548 is an Open Drain, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
The MCP6547 is an Open Drain, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
OPEN-DRAIN OUTPUT SUB-MICROAMP COMPARATORS
|
MICROCHIP[Microchip Technology]
|
| PM300CSD060 |
Intellimod Module Three Phase IGBT Inverter Output (300 Amperes/600 Volts)
Intellimod⑩ Module Three Phase IGBT Inverter Output (300 Amperes/600 Volts)
|
Powerex Power Semiconductors
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| M3500-0510 |
500-1000 MHZ TYPICAL OUTPUT FREQUENCY / MODULATION SENSITIVITY VERSUS TUNING VOLTAGE
|
Micronetics, Inc.
|
| VF160S-G-FREQ-OUT14 |
CRYSTAL OSCILLATOR, CLOCK, 10 MHz - 300 MHz, ECL OUTPUT
|
VALPEY FISHER CORP
|
| TCXO-800-EFR-206 TCXO-800-EFK-106 TCXO-800-DFK-507 |
Temperature Compensated Crystal Oscillator
TCVCXO, CLIPPED SINE OUTPUT, 10 MHz - 40 MHz
TCVCXO, CLIPPED SINE OUTPUT, 12.8 MHz
TCVCXO, CLIPPED SINE OUTPUT, 16.8 MHz
TCVCXO, CLIPPED SINE OUTPUT, 19.8 MHz
TCVCXO, CLIPPED SINE OUTPUT, 20 MHz
TCVCXO, CLIPPED SINE OUTPUT, 24 MHz
TCVCXO, CLIPPED SINE OUTPUT, 25 MHz
TCVCXO, CLIPPED SINE OUTPUT, 24.5535 MHz
TCVCXO, CLIPPED SINE OUTPUT, 14.31818 MHz
TCVCXO, CLIPPED SINE OUTPUT, 26 MHz
TCVCXO, CLIPPED SINE OUTPUT, 12.504 MHz
TCVCXO, CLIPPED SINE OUTPUT, 16.396 MHz
TCVCXO, CLIPPED SINE OUTPUT, 32.768 MHz
TCVCXO, CLIPPED SINE OUTPUT, 14 MHz
TCVCXO, CLIPPED SINE OUTPUT, 17.5 MHz
TCVCXO, CLIPPED SINE OUTPUT, 19.2 MHz
TCVCXO, CLIPPED SINE OUTPUT, 14.4844 MHz
TCVCXO, CLIPPED SINE OUTPUT, 16.325291 MHz
TCVCXO, CLIPPED SINE OUTPUT, 15 MHz
TCVCXO, CLIPPED SINE OUTPUT, 13 MHz
TCVCXO, CLIPPED SINE OUTPUT, 16.36625 MHz
TCVCXO, CLIPPED SINE OUTPUT, 16.3683 MHz
|
Vectron International, Inc
|
| SDRMFSMS SDR9JF SDR9KF SDR9KFSMS SDR9MF SDRJFSMS |
9.0 AMPS 600 - 1000 VOLTS 250 ns typical FAST RECOVERY RECTIFIER
|
SSDI[Solid States Devices, Inc]
|
| CM300DU-12H |
Dual IGBTMODU-Series Module 300 Amperes/600 Volts
Dual IGBTMOD U-Series Module 300 Amperes/600 Volts
Dual IGBTMOD⑩ U-Series Module 300 Amperes/600 Volts
|
POWEREX[Powerex Power Semiconductors]
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
|
