| PART |
Description |
Maker |
| M25PX64 M25PX64-VME6E M25PX64-VME6F M25PX64-VMF6E |
64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
|
Numonyx B.V
http://
|
| M25PX64-VMF6TP |
64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
|
Numonyx B.V
|
| M50FLW040AK5P M50FLW040ANB5P M50FLW040A06 M50FLW04 |
4-Mbit (5 ??64 Kbyte blocks 3 ??16 ??4 Kbyte sectors) 3-V supply Firmware Hub / low-pin count Flash memory
4-Mbit (5 】 64 Kbyte blocks 3 】 16 】 4 Kbyte sectors) 3-V supply Firmware Hub / low-pin count Flash memory
|
STMICROELECTRONICS[STMicroelectronics]
|
| AT89C51CC03 |
8-bit microcontroller with CAN controller and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external brown- out). Pinout compatible with T89C51CC01.
|
Atmel
|
| ATMEGA3290P ATMEGA329PV-20MU ATMEGA3290PV ATMEGA32 |
8-bit Microcontroller with 32K Bytes In-System Programmable Flash
32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-c
|
ATMEL[ATMEL Corporation]
|
| ST10F271 ST10F271Z1T3 ST10F271Z1Q3 |
16-bit MCU with 128 Kbyte Flash memory and 12 Kbyte RAM
|
STMicroelectronics
|
| ST10F273M-4QR3 |
16-bit MCU with 512 Kbyte Flash memory and 36 Kbyte RAM
|
ST Microelectronics
|
| M29DW127G M29DW127G70NF6E |
128-Mbit (8 Mbit x16 or 16 Mbit x8 , multiple bank, page, dual boot) 3 V supply flash memory
|
Numonyx B.V
|
| N25Q128A11BF840E N25Q128A21BF840E N25Q128A31BF840E |
128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
|
Numonyx B.V
http://
Micron Technology
|
| SST34HF162G-70-4C-L3KE SST34HF162G-70-4E-L3KE SST3 |
16 Mbit Dual-Bank Flash 2/4 Mbit SRAM ComboMemory SPECIALTY MEMORY CIRCUIT, PBGA48
|
Silicon Storage Technology, Inc.
|
