| PART |
Description |
Maker |
| 87130-1000 87130-1200 |
Header; No. of Contacts:80; Pitch Spacing:0.5mm; No. of Rows:2; Series:SlimStack; Connector Body Material:Polymer; Mounting Type:PC Board; Terminal Type:Surface Mount 10 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, WIRE TRAP
2.5mm Cbl Hld Hsg PBT Wht 12Ckt 12 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, WIRE TRAP
|
Molex, Inc.
|
| 52012-0410 52012-0910 |
2.5 WIRETRAP 2.5 W-TRAP 4 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, WIRE TRAP
2.5 WIRETRAP 2.5 W-TRAP 9 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, WIRE TRAP
|
Molex, Inc.
|
| BD11670GWL-E2 |
DPDT Type (Double Pole Double Throw)
|
Rohm
|
| RPI-352 A5800742 |
Sensors > Photointerrupters > Linear Phototransistor output
Photointerrupter, double-layer mold type
From old datasheet system
Photointerrupter/ double-layer mold type
|
ROHM[Rohm]
Rohm CO.,LTD.
|
| RPI-221 |
Sensors > Photointerrupters > Linear Phototransistor output
Photointerrupter, double-layer mold type
Photointerrupter/ double-layer mold type
|
Rohm CO.,LTD.
|
| CNF41RXXXXXX-XM |
Chip Type EMI Filters
|
Maruwa
|
| BLM41PG750SN1 BLM41PG102SN1 BLM41PG181SN1 BLM41PG4 |
On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing Co., Ltd.
|
| NFL21SP106X1C3 |
On-Board Type (DC) EMI Suppression Filters (EMIFIL)
|
MURATA MANUFACTURING CO LTD
|
| NFW31SP207X1E4 NFW31SP106X1E4 NFW31SP157X1E4 |
(NFW31S Series) On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing
|
| 3TB41-15 |
TB Series Basic Switch, Double Pole Double Throw Double Break Circuitry, 10 A at 250 Vac, Pin Plunger Actuator, Silver Contacts, Screw Termination
|
Honeywell
|
