| PART |
Description |
Maker |
| PN18-6LF-C PV14-10LFN-C |
TERM LOCK/FORK NYL 22-18AWG #6 COPPER ALLOY, TIN FINISH, FORK TERMINAL
|
Panduit, Corp.
PANDUIT CORP
|
| DST410S |
SMD Type Tuning Fork Crystal Resonators
|
List of Unclassifed Manufacturers
ETC[ETC]
|
| ST3215SB32768H5HPWAA |
Surface Mount Type: Tuning Fork ST3215SB
|
AVX Corporation
|
| SK59B SK510B SK52B SK53B SK54B SK55B SK56B |
5.0 AMPS. Surface Mount Schottky Barrier Rectifiers
; Contact Spacing (mm): 2; Terminal Pitch (mm): 2; Stack Height (mm): 5.1; PCB Mount Type: Through-hole; Current Rating(Amps)(Max.): 2; Contact Mating Area
|
Taiwan Semiconductor Co...
TSC[Taiwan Semiconductor Company, Ltd]
Taiwan Semiconductor Co., Ltd.
|
| HCTS374T HCTS374KTR HCTS374DTR |
Dual Positive-Edge-Triggered D-type Flip-Flops With Clear And Preset 20-LCCC -55 to 125
1024 x 18 Synchronous FIFO Memory 68-CPGA -55 to 125
Radiation Hardened Octal D-Type Flip-Flop, Three-State, Positive Edge Triggered
|
Intersil Corporation
|
| 89177-6030 89177-6011 |
Edge Connector,PCB Mnt,RECEPT,120 Contacts,0.05 Pitch,PC TAIL Terminal 120 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
ASSY 1.27 EDGE CONN CARD 120 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
|
Molex, Inc.
|
| R644 R644-2 R644-3C R644-3F R630 R636-1 R636-2 |
PCB Accessories R600 Edge Connectors
|
List of Unclassifed Manufacturers
|
| PN18-6F-M |
Fork Tongue Solderless Terminal; Wire Size (AWG):22-18; Stud Size:#6; Insulator Color:Red; Pack Quantity:1000 COPPER ALLOY, TIN FINISH, FORK TERMINAL
|
Panduit, Corp.
|
| IDT74LVC374ASO IDT74LVC374A IDT74LVC374APG IDT74LV |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O
3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
From old datasheet system
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP
|
IDT[Integrated Device Technology]
|
| 44474-0441 0444740441 |
4.20mm (.165") Pitch Mini-Fit HCS Header, Dual Row, Vertical, Blind Mating, with Snap-in Plastic Peg PCB
4.20mm (.165) Pitch Mini-Fit HCS Header, Dual Row, Vertical, Blind Mating, with Snap-in Plastic Peg PCB
|
Molex Electronics Ltd.
|
