PART |
Description |
Maker |
15LED20M-ST |
Typical optical and electrical characteristics.
|
Anadigics Inc
|
AN649 |
HFTA-04.0: Optical/Electrical Conversion in SDH/SONET Fiber Optic Systems
|
Maxim Integrated Products, Inc. MAXIM[Maxim Integrated Products]
|
TX1.25GBIT/S |
Parallel Optical Links (PAROLI) - PAROLI?2 Tx AC, 1.25 Gbit/s, multistandard electrical interface
|
Infineon
|
N3753AADC6P N3753AADC48P N3753BADC48P N3753CADC48P |
Suitable for automatic control, household electrical appliances and machinery electrical facilities.
|
DB Lectro Inc
|
ACC701-000 |
10/100Mb/s Electrical-to-Electrical Ethernet Demarcation Device.
|
JDS Uniphase Corporation
|
KTS1C1S250 |
Typical RDS(on) (N-Channel)=0.9 Typical RDS(on) (N-Channel)=2.1 Gate-source zener diode
|
TY Semiconductor Co., Ltd
|
TL802A-1 TL801 |
TYPICAL INSTALLATION DIAGRAM TYPICAL INSTALLATIION DIAGRAM
|
List of Unclassifed Manufacturers List of Unclassifed Manufac...
|
FMCE-0328 |
Attenuation to 60 db at 500 kHz, typical Operating temperature -55掳 to 125掳C Attenuation to 60 db at 500 kHz, typical Operating temperature -55° to 125°C
|
Interpoint Corporation Company
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
FCBP110LD1L10 |
Finisar seeks to take the optical module out of optical connectivity
|
List of Unclassifed Manufacturers
|
HLMP-CB30 HLMP-CB31 HLMP-CM31 HLMP-CB15 HLMP-CB16 |
T-1 3/4 SINGLE COLOR LED, HIGH INTENSITY GREEN, 5 mm T-1 3/4 (5mm) Precision<BR>Optical Preformance InGaN Green LED T-1 3/4 (5 mm) Precision Optical Performance InGaN Blue and Green LEDs HLMP-CB15 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Blue LED HLMP-CM15 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Green LED HLMP-CB30 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Blue LED HLMP-CB16 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Blue LED HLMP-CM30 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Green LED HLMP-CM31 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Green LED HLMP-CB31 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Blue LED HLMP-CM16 · T-1 3/4 (5mm) Precision Optical Preformance InGaN Green LED
|
AGILENT TECHNOLOGIES INC HP[Agilent(Hewlett-Packard)] Agilent (Hewlett-Packard)
|