| PART |
Description |
Maker |
| MIC5353-1.8YMT MIC5353-2.5YMT MIC5353-2.6YMT MIC53 |
3.3 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6
500mA LDO in 1.6mm 隆驴 1.6mm Package
500mA LDO in 1.6mm ? 1.6mm Package
500mA LDO in 1.6mm × 1.6mm Package
|
MICREL INC
Micrel Semiconductor
|
| MIC5338-4CYMT MIC5339-1.8/1.2YMT MIC5339-1.2/1.0YM |
Dual 300mA μCap LDO in 1.6mm x 1.6mm Thin MLF?
|
Micrel Semiconductor
|
| TL1105XF160Q TL1105SPF160Q1RBLK TL1105SPF160Q1RRED |
TACT SWITCHES - 6mm x 6mm
|
E-SWITCH
|
| 3306F-1-254 |
Single-Turn 6mm Round Cermet Trimmer - Leadfree 250K 25% 6mm Single Turn RESISTOR, TRIMMER, CERMET, 1 TURN(S), 0.2 W, 250000 ohm
|
Bourns, Inc.
|
| ICX258AK |
Diagonal 6mm (Type1/3) CCD Image Sensor for NTSC
Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras
|
SONY[Sony Corporation]
|
| 101251228 101251248 101251028 101251238 101250618 |
EINSCHRAUBVERBIND GERADE 12MM G0.25
EINSCHRAUBVERBIND GERADE 12MM G0.5
EINSCHRAUBVERBIND GERADE 10MM G0.25
EINSCHRAUBVERBIND GERADE 12MM G0.375
EINSCHRAUBVERBIND GERADE 6MM G0.125
EINSCHRAUBVERBIND GERADE 6MM G0.25
EINSCHRAUBVERB GER O RING 4MM M5 EINSCHRAUBVERB胃食管反毫米M5的O型圈
|
Crystek, Corp.
|
| 54127899 98F003PT-R7 35F2542PT-H7 35F2547PT-K8 35F |
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits
TIP PT SLOPED ROUND 3.2MM
TIP PT CONICAL 0.8MM
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
TIP PT-AA7 SLOPED ROUND 1.6MM
TIP PT SLOPED ROUND 1.2MM
TIP PT SCREWDRIVER 1.2MM 提示葡萄牙螺丝刀1.2毫米
TIP PT SCREWDRIVER 0.8MM 提示葡萄牙螺丝刀0.8毫米
TIP PT SCREWDRIVER 1.6MM 提示葡萄牙螺丝刀1.6mm
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙螺丝刀0.8毫米
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙倾斜.6mm
|
Opto 22
NXP Semiconductors N.V.
ITT, Corp.
|
| ICX254AL |
Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA
Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras
|
SONY[Sony Corporation]
|
| H2105A01 H2101B01 |
0.80mm Terminal Pin, for 1.6mm panel thickness BRASS, TIN OVER NICKEL FINISH, PCB TERMINAL
0.95mm Terminal Pin, Below-board design, for 1.6mm panel thickness BRASS, TIN FINISH, PCB TERMINAL
|
Harwin PLC
|
| KC2016B-C1 |
CMOS/ 1.8V, 2.5V, 3.3V Compatible/ 2.0×1.6mm
|
Kyocera Kinseki Corpotation
|
