| PART |
Description |
Maker |
| LTC3723-1 LTC3723-2-15 |
Synchronous Push-Pull PWM Controllers
|
Linear Technology
|
| 19003-0048 19003-0057 19003-0053 19003-0056 19003- |
.250 X.032 FML FIQD EXP CONT.(BB-2206XC) 2 mm2, PUSH-ON TERMINAL
.187X.032 FEMALE AQUA FIQD CONT BB-2208C 2 mm2, PUSH-ON TERMINAL
.187X.020 FEMALE FIQD EXPANDED (BB-2207X 2 mm2, PUSH-ON TERMINAL
.187 X .032 FEMALE FIQD (BB-2208) 2 mm2, PUSH-ON TERMINAL
.250 X.032 FML FIQD EXP TAPED(BB-2206XT) 2 mm2, PUSH-ON TERMINAL
190030058 2 mm2, PUSH-ON TERMINAL
.205 X .020 BLUE FIQD CONT BB-2215C 2 mm2, PUSH-ON TERMINAL
.250 X.032 FML FIQD EXP TAPED(AA-2201XT) 0.8 mm2, PUSH-ON TERMINAL
190030060 2 mm2, PUSH-ON TERMINAL
.187 X .020 FEMALE FIQD CONT. (AA-2202C) 0.8 mm2, PUSH-ON TERMINAL
.250 X .032 FEMALE FIQD CON 2 mm2, PUSH-ON TERMINAL
|
Molex, Inc.
TE Connectivity, Ltd.
MOLEX INC
|
| MIC383805 MIC3838 MIC3838BMM |
Flexible Push-Pull PWM Controller
|
MIC GROUP RECTIFIERS
Micrel Semiconductor
|
| LTC3901EGN LTC3901 LTC3901-15 |
Secondary Side Synchronous Driver for Push-Pull and Full-Bridge Converters
|
Linear Technology
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| FP203 |
Push-Pull Circuits
|
Sanyo Semicon Device
|
| DS1815 DS1815-5 DS1815-10 DS1815-15 DS1815R-5TR DS |
3.3V EconoReset with Push-Pull Output
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
| AAT4296 AAT4298 |
Five/Six Channel Push/Pull I/O Expander
|
Advanced Analogic Technologies
|
| S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
| S8740220GT |
GaAs Push Pull Hybrid
|
PDI
|
| FP206 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
|
