| PART |
Description |
Maker |
| NX8341UH-AZ NX8341UN-AZ |
PLIERS, COMBINATION REDLINE 200MMPLIERS, COMBINATION REDLINE 200MM; Jaw type:Combination; Length:200mm; Handle type:High grip; Capacity, cutting hard wire:2.0mm; Capacity, jaw max:2mm; Joint Construction:lap; Length, jaw:44mm; Width,
NECs 1310 nm AlGalnAs MQW-DFB TOSA FOR 10 Gb/s APPLICATION
Triac; Thyristor Type:Snubberless; Peak Repetitive Off-State Voltage, Vdrm:1000V; On State RMS Current, IT(rms):8A; Gate Trigger Current (QI), Igt:50mA; Current, It av:8A; Gate Trigger Current Max, Igt:50mA RoHS Compliant: Yes
|
California Eastern Laboratories
|
| ST333R4F1 |
Visible ray cutting resin molding
|
KODENSHI KOREA CORP.
|
| CUTFOX-S-VDE-DB |
Inductively hardened blades for long-term stable cutting performance
|
PHOENIX CONTACT
|
| CUTFOX-SP-VDE-DB |
Inductively hardened blades for long-term stable cutting performance
|
PHOENIX CONTACT
|
| 149-6330 149-6331 D00634 |
VDE Snipe Nose Pliers
|
List of Unclassifed Manufacturers
|
| CRIMPFOX-ZA-5 |
Crimping pliers, for non-insulated connections, (cable lugs, ring or tabtype)
|
PHOENIX CONTACT
|
| MICROFOX-R |
Electronic round-nose pliers, smooth grip, with opening spring
|
PHOENIX CONTACT
|
| UNIFOX-C-VDE-M |
UNIFOX ... VDE-insulated combination pliers in straight and angled versions
|
PHOENIX CONTACT
|
| UNIFOX-C-VDE-DB |
Excellent transformation ratios for excellent gripping and cutting performance
|
PHOENIX CONTACT
|
| CRIMPFOX-C120 |
Basic pliers, for accommodating dies for a wide range of contact types up to 120 mm2
|
PHOENIX CONTACT
|
| CRIMPFOX-RC-2 |
Crimping pliers. with positioner, for turned plug-in connector contacts 0.14 mm2 to 2.5 mm2
|
PHOENIX CONTACT
|
