PART |
Description |
Maker |
135D306X0006C2E3 135D905X0125F2 135D 135D106X0025C |
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For - 55 ∑C to 200 ∑C Operation
|
VISAY[Vishay Siliconix]
|
T356G156K025AT |
T356, Tantalum, MnO2 Tantalum, Commercial Grade, 15 uF, 10%, 25 V, Radial, Solid Tantalum, Conformal, Dipped, Lead Spacing = 5.08mm
|
Kemet Corporation
|
135D306X0006C2 135D206X0010C2 135D476X0010C2 135D1 |
Wet Tantalum Capacitors, Axial, Tantalum-Case with Glass-to-Tantalum Hermetic Seal, for - 55°C to 200°C Operation Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55?? to 200?? Operation Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55∑C to 200∑C Operation Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55隆?C to 200隆?C Operation Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55掳C to 200掳C Operation Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55°C to 200°C Operation
|
VISAY[Vishay Siliconix]
|
CT79475X0100A2 735D275X0125A2 735D106X0063A2 735D1 |
Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved
|
Vishay Siliconix
|
T322D106M035AT |
Tantalum, MnO2 Tantalum, Commercial Grade, T322, 10 uF, 20%, 35 V, 2 Ohms
|
Kemet Corporation
|
T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional PERFORMANCE CHARACTERISTICS TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5 TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
T494B476K006AT |
Tantalum, MnO2 Tantalum, T494, 47 uF, 10%, 6.3 V, 3528, SMD, MnO2, Molded, Low ESR, 500 mOhms, 2.1mm
|
Kemet Corporation
|
738D 738D685X0075A2 738D186X0125C2 738D335X0125AR |
Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal, Sintered Anode TANTALEX Capacitors 液体钽电容器的钽玻璃密封产品,烧结电容器阳极TANTALEX
|
Vishay Intertechnology,Inc. Vishay Intertechnology, Inc.
|
T491B685K025AT |
Tantalum, MnO2 Tantalum, T491, 6.8 uF, 10%, 25 V, 3528, SMD, MnO2, Molded, 2.8 Ohms, Height Max = 2.1mm
|
Kemet Corporation
|
T495B106M016ATE650 |
Tantalum, MnO2 Tantalum, T495, 10 uF, 20%, 16 V, 3528, SMD, MnO2, Molded, Low ESR, 650 mOhms, Height Max = 2.1mm
|
Kemet Corporation
|
|