PART |
Description |
Maker |
R-785.0-1.0 R-781.8-1.0 R-782.5-1.0 R-783.3-1.0 |
1.0 AMP SIP3 Single Output
|
RECOM[Recom International Power]
|
R-78HB15-0.5 R-78HB5.0-0.5 R-78HB24-0.3 |
0.5 AMP SIP3 Single Output
|
Recom International Pow...
|
R-785.0-1.0 R-783.3-1.0 R-782.5-1.0 R-781.8-1.0 |
1.0 AMP SIP3 Single Output
|
RECOM Power Inc.
|
R-78E3.3-1.0 |
1.0 AMP SIP3 Single Output
|
Recom International Pow...
|
R-78B6.5-1.5L R-78B1.5-1.5L R-78B2.5-1.5L R-78B5.0 |
1.5 AMP SIP3 Single Output
|
RECOM Power Inc.
|
R-78HB5.0-0.5L R-78HB15-0.5L R-78HB6.5-0.5L R-78HB |
0.5 AMP SIP3 Single Output 0.5安培采用SIP3单输
|
RECOM Power Inc. RECOM Electronic GmbH
|
PSR1-7812LF PSR1-78XXLF PSR1-7809LF PSR1-7805LF PS |
WIDE INPUT REGULATED SINGLE OUTPUT SIP3 ?1000mA
|
PEAK electronics GmbH
|
EL8176FSZ-T7 EL8176FIZ-T7 |
Micropower Single Supply Rail-to-Rail Input-Output Precision Op Amp; Temperature Range: Full-Range Ind; Package: 6-WLCSP T&R OP-AMP, 500 uV OFFSET-MAX, 0.4 MHz BAND WIDTH, PBGA6
|
Intersil, Corp. Intersil Corporation
|
MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc. MICROCHIP[Microchip Technology]
|
EHA2-2602/883B EHA7-2602-2 EHA7-2602/883B EHA7-262 |
39µA Micropower Single and Dual Precision Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps; Temperature Range: Full-Range; Package: 6-SOT-23 T&R Single and Dual Single Supply Ultra-Low Noise, Ultra-Low Distortion, Rail-to-Rail Output, Op Amp; Temperature Range: Full-Range Ind; Package: 10-uTQFN T&R Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-Amp; Temperature Range: Full-Range Ind; Package: 16-QSOP Quad Precision Micropower Single Supply Rail-to-Rail Input and Output Precision Op Amps; Temperature Range: Full-Range Ind; Package: 16-QSOP Voltage-Feedback Operational Amplifier 电压反馈运算放大
|
TE Connectivity, Ltd.
|