| PART |
Description |
Maker |
| AN1548 |
HIGH RESOLUTION SINGLE SLOPE CONVERSION WITH THE ANALOG COMPARATOR OF THE ST52X440
|
SGS Thomson Microelectronics
|
| MAX9051 MAX9039 MAX9041 MAX9052 MAX9042 MAX9053 MA |
4-Bit Binary Full Adders With Fast Carry 16-CFP -55 to 125
"SOT23, Micropower Comparator plus Precision 2.5V Refenece"
" Micropower, Comparator and Reference in UCSP"
"SOT23, Micropower Comparator plus Precision 2.048V Refenece"
" SOT23, Micropower Comparator plus Precision 2.5V Refenece"
"Dual, Micropower Comparator plus Precision 2.048V Refenece"
Micropower, Single-Supply, UCSP/SOT23 Comparator Precision Reference ICs
|
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| ALD2302 ALD2321BSC |
Ultra Low Vos EPAD® Dual CMOS Analog Voltage Comparator
DUAL PRECISION CMOS VOLTAGE COMPARATOR WITH PUSH-PULL DRIVER
|
Advanced Linear Devices
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| RH1011H |
Analog Comparator 模拟比较
|
Linear Technology, Corp.
|
| MAX9685CPE-2 MAX9685CPE-4 |
Analog Comparator 模拟比较
|
Maxim Integrated Products, Inc.
|
| PM139ARC/883 PM139Y/883 |
Analog Comparator 模拟比较
|
Maxim Integrated Products
|
| AD9685BD AD9685BH |
Analog Comparator 模拟比较
|
TOKO, Inc.
|
| LT1116_06 LT1116 LT1116CN8 LT1116CS8 LT1116CS8TR |
12ns, Single Supply Ground-Sensing Comparator; Package: SO; No of Pins: 8; Temperature Range: 0°C to 70°C COMPARATOR, 3500 uV OFFSET-MAX, 12 ns RESPONSE TIME, PDSO8
|
Linear Technology, Corp.
LINER[Linear Technology]
|
| MAX916ESENBSP MAX916CPE |
From old datasheet system
Analog Comparator
|
Maxim Integrated Products Inc
|
| TC1026CEUA TC1026 TC1026CEOA TC1026CEPA TC1026CEOA |
The TC1026 is a mixed-function device combining a general-purpose op amp, comparator, and voltage reference in a single 8-Pin package. ...
The TC1026 is a mixed-function device combining a general-purpose op amp, comparator, and voltage reference in a single 8-Pin package. This increased integration allows the user to replace two or three packages, which saves space, lowers s
Linear Building Block - Low Power Comparator with Op Amp and Voltage Reference
|
MICROCHIP[Microchip Technology]
|
| TS339 TS339C TS339I TS339M TS339MP |
Analog Comparator
MICROPOWER QUAD CMOS VOLTAGE COMPARATORS
|
意法半导
STMICROELECTRONICS[STMicroelectronics]
|
