| PART |
Description |
Maker |
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| MX674A MX574A |
Industry-Standard, Complete 12-Bit ADCs
|
Maxim Integrated Products
Maxim Integrated Produc...
|
| 68HC05PL4B 68HC705PL4B |
Industry standard 8-bit M68HC05 CPU core
|
Freescale Semiconductor, Inc
|
| LTC7545AKNPBF LTC7545ABSWTRPBF LTC7545ABGTR |
Improved Industry Standard Parallel 12-Bit Multiplying DAC
|
Linear Technology
|
| LTC7541A LTC7541AKN LT7541A LTC7541 LTC7541AJN LTC |
Improved Industry Standard CMOS 12-Bit multiplying DAC
From old datasheet system
|
LINEAR TECHNOLOGY CORP
|
| MC68HC05SU3A |
Fully static chip design featuring the industry standard 8-bit M68HC05 core
|
FREESCALE[Freescale Semiconductor, Inc]
|
| ARE1303 ARE1303Z ARE1306 ARE1309 ARE1312 ARE1312Z |
RE-relay. 2.6 GHz 75 ohm relays for broadcasting industry. Standard PC board terminal. Nominal voltage 4.5 V DC.
2.6 GHZ 75з RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75 RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75?/a> RELAYS FOR BROADCASTING INDUSTRY
|
Matsushita Electric Works(Nais)
NAIS[Nais(Matsushita Electric Works)]
|
| MAX11100 EL2423J/883B MAX148BCAP-T MAX148BCAPT MAX |
16-Bit, 5V, 200ksps ADC with 10μA Shutdown
Quad De-Compensated High Speed Operational Amplifier 四德补偿的高速运算放大器
2.7V to 5.25V Low-Power 8-Channel Serial 10-Bit ADCs 8-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO20
3V, 8-Bit ADC with 1µA Power Down 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO20
3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers 1-CH DELTA-SIGMA ADC, PDSO28
CMOS, 1.3µs, 8-Bit ADC with Voltage Reference and Track/Hold 1-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDIP20
|
Maxim Integrated Products, Inc.
|
| MAX1214EGKD MAX1228AEEP-T MAX1229AEEPT |
1.8V, 12-Bit, 210Msps ADC for Broadband Applications 1-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, QCC68
12-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference 12-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO20
|
Maxim Integrated Products, Inc.
|
| LTC7545ACGPBF LTC7545ABSWTR LTC7545ABGTRPBF |
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: SSOP; No of Pins: 20; Temperature Range: -40°C to 85°C
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: SO; No of Pins: 20; Temperature Range: -40°C to 85°C
|
LINEAR TECHNOLOGY CORP
|
| AD7871 AD7871TQ AD7872AN AD7872KR AD7871KN AD7872J |
CMOS, Complete 14-Bit Sampling ADC with Serial Output
CMOS, Complete 14-Bit, Sampling ADC with Three Data Output Formats
1-CH 14-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDIP16
10-Bit, 20 MSPS ADC SE/Diff Inputs with Int References and 9.5 bit ENOB 28-SOIC -40 to 85 1-CH 14-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL/PARALLEL ACCESS, PDIP28
LC2MOS Complete 14-Bit, Sampling ADCs 1-CH 14-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
LC2MOS Complete 14-Bit/ Sampling ADCs
|
ANALOG DEVICES INC
Analog Devices, Inc.
|
| MAX1069 MAX1069ACUD MAX1069BCUD MAX1069CCUD MAX106 |
0.3-6V; 58.6ksps, 14-bit, 2-wire serial 8-bit serial ADC. For hand-held portable applications, medical instrumnets, battery-powered test equipment, solar-powered remote systems, received-signal-strength indicators, system supervision
58.6ksps 14-Bit 2-Wire Serial ADC
" 58.6ksps, 14-Bit, 2-Wire Serial ADC in a 14-Pin TSSOP"
58.6ksps / 14-Bit / 2-Wire Serial ADC
|
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
