PART |
Description |
Maker |
HI2302 |
A/D Converter, 8-Bit, 50MSPS, Converter with Clamp Function
|
Intersil
|
ATA06211 ATA06211D1C |
The ANADIGICS ATA06211 is a 5V low noise transimpedence amplifier with AGC designed to be used in OC-12/STM-4 fiber optic links. AGC Transimpedance Amplifier From old datasheet system
|
Anadigics Inc ANADIGICS[ANADIGICS, Inc]
|
1SV233 |
INLET, IEC, SWITCHED, RED; Connector type:IEC; Gender:Plug; Current rating:10A; Voltage rating, AC:250V; Outlets, No. of:1; Termination method:Solder PIN Diode for VHF/ UHF/ AGC Use PIN Diode for VHF UHF AGC Use PIN Diode for VHF, UHF, AGC Use
|
Sanyo Electric Co.,Ltd. SANYO[Sanyo Semicon Device]
|
LP502 LP502-PLID |
AUDIO AMPLIFIER, PDSO8 PLID, 8 PIN LP502 - AGC-O Compression Preamplifier Low Distortion AGC Compression Amplifier
|
GENNUM[Gennum Corporation]
|
M62210FP |
GENERAL PURPOSE MULTI FUNCTION DC-DC CONVERTER
|
Renesas Electronics Corporation
|
M62211FP M62211P M62211 |
GENERAL PURPOSE MULTI FUNCTION DC-DC CONVERTER
|
Mitsubishi Electric Corporation MITSUBISHI[Mitsubishi Electric Semiconductor]
|
PJLEDS3250 |
RECTIFICATION FUNCTION IN FLYBACK CONVERTER FOR LED POWER
|
Pan Jit International Inc.
|
CXD1176Q |
8-bit 20MSPS Video A/D Converter with Clamp Function
|
SONY[Sony Corporation]
|
CXD2303AQ |
8-bit 3-channel 50 MSPS Video A/D Converter with clamp function
|
Sony Corporation
|
CXD1179 CXD1179Q |
From old datasheet system 8-bit 35MSPS Video A/D Converter with Clamp Function
|
SONY[Sony Corporation]
|
STEVAL-ISA044V2 |
3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10
|
STMicroelectronics
|