| PART |
Description |
Maker |
| HCPL0302 HCPL-0302 |
(HCPL3020 / HCPL0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler
(HCPL-3020 / HCPL-0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Avago
|
| HCPL3150 HCPL-3150 HCPL-3150060 HCPL-3150300 HCPL- |
0.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
HP[Agilent(Hewlett-Packard)]
|
| HCPL-J314 HCPL-314J |
0.6 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACNW3130 ACPLJ313 |
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
AVAGO TECHNOLOGIES LIMI...
|
| HCPL-T250 HCPL-T250300 HCPL-T250360 HCPL-T250500 H |
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-K342-060E ACPL-K342-000E ACPL-K342-560E ACPL- |
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI...
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-H312 |
2.5 Amp Output Current IGBT Gate Driver Optocoupler with Low ICC UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI...
|
| ACPL-W341 ACPL-P341-560E ACPL-W341-560E |
3.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail
|
AVAGO TECHNOLOGIES LIMITED
|
| SKIIP03NAC066V1 |
Large Current 300mA CMOS LDO Regulators; Output voltage (V): 2.8; Output current (mA): 300; Supply voltage (V): 2.5 to 5.5; I/O voltage difference (mV): 60; Ripple rejection (dB): 60; Circuit current (µA): 65; Package: HVSOF6
3-phase bridge rectifier 3-phase bridge inverter
|
Semikron International
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
