| PART |
Description |
Maker |
| TDA8941 TDA8941P |
1.5 W mono Bridge Tied Load BTL audio amplifier
|
NXP Semiconductors
|
| TDA8941P TDA8941 TDA8941P-02 |
From old datasheet system
1.5 W mono Bridge Tied Load BTL audio amplifier
|
Philips Semiconductors
|
| TDA8946 |
2 x 15 W stereo Bridge Tied Load BTL audio amplifier
|
NXP Semiconductors
|
| LM2954F LM2954P |
300 mA low-dropout voltage regulator. Output voltage: 4.95V(min), 5.0V(typ), 5.05V(max) Feedback tied to 5V tap an output tied to output sense(Vout=5V) and Vshutdown
|
Contek Microelectronics
|
| MP7782 |
Mono Bridge Audio Amplifier
|
MPS
|
| TDA7266M 6141 |
7W MONO BRIDGE AMPLIFIER
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| PC33887VW/R2 MC33887DWB/R2 MC33887PNB/R2 MC33887DH |
5.0 A H-Bridge with Load Current Feedback
5.0 A H-Bridge with Load Current Feedback
|
Motorola, Inc.
Motorola Inc
|
| TDA7572 |
SPECIALTY ANALOG CIRCUIT, PQFP64
200W mono bridge PWM amplifier with built-in step-up converter
|
STMicroelectronics
|
| ISL6334IRZ ISL6334CRZ ISL6334AIRZ ISL6620 ISL6620A |
VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring
|
Intersil Corporation
|
| LP62S2048-I LP62S2048M-10LI LP62S2048M-10LLI LP62S |
CAP .01UF 50V CERAMIC MONO 5% 256K × 8位低电压CMOS的SRAM
CAP 1500PF 100V CERAMIC MONO 5% 256K × 8位低电压CMOS的SRAM
.10UF 100V 10% MONOLITH CERM CAP
CAP 10000PF 50V CERAMIC MONO 5%
256K X 8 BIT LOW VOLTAGE CMOS SRAM
|
AMIC Technology, Corp.
AMIC Technology Corporation
AMICC[AMIC Technology]
|
| NCP45521 NCP45520IMNTWGH NCP45521IMNTWGH NCP45520I |
ecoSWITCH Advanced Load Management Controlled Load Switch with Low RON
ecoSWITCH Advanced Load Management
|
ON Semiconductor
|
