PART |
Description |
Maker |
TCM811 TCM811FERC TCM811LERC TCM811MERC TCM811RERC |
The TCM811 and TCM812 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. A manual reset input is provided to override the reset monitor, 4-Pin Microcontroller Reset Monitors
|
MICROCHIP[Microchip Technology]
|
CAT823 CAT823LSDI-G CAT823LTDI-G CAT823MSDI-G CAT8 |
1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 System Supervisory Voltage Reset with Watchdog and Manual Reset
|
Catalyst Semiconductor
|
MM1095BF MM1095 MM1095AD MM1095AF MM1095AS MM1095B |
System Reset (with built-in watchdog timer) System Reset (Built-in Watch Dog Timer)
|
http:// Mitsumi Electronics, Corp. MITSUMI ELECTRIC
|
MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection.. 8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy 8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy 8-Pin μP Supervisory Circuits with ±1.5eset Accuracy 8-Pin P Supervisory Circuits with 1.5eset Accuracy From old datasheet system 8-Pin レP Supervisory Circuits with 【1.5eset Accuracy 5015 RR 3#8 SKT RECP 8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset 8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路,提amp;plusmn;1.5%的复位门限精 Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8 Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog. Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products] Maxim Integrated Products, Inc.
|
MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset. 4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4 8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路,带有手动复位输 8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路,带有手动复位输
|
Maxim Integrated Produc... MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products] Maixm Maxim Integrated Products, Inc.
|
SA56616-XX SA56615-XX SA56615-XX_SA56616-XX_1 |
CMOS system reset with adjustable delay time From old datasheet system
|
Philips
|
PST90XX PST9013 |
IC for System Reset Monolithic IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3 From old datasheet system
|
MITSUMI ELECTRIC CO., LTD.
|
MM1134 |
System Reset (with battery back-up) From old datasheet system
|
Mitsumi
|
MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
CD40192BMS CD40193BMS FN3363 CD40192 CD40193 |
CMOS Presettable Up/Down Counters (Dual Clock With Reset) Up/Down Counter, Presettable, Dual Clock, Reset, Binary Type, Rad-Hard, CMOS, Logic From old datasheet system CMOS Presettable Up/Down Counters (Dual Clock With Reset) 的CMOS可预置上/下计数器(双时钟复位 CMOS Presettable Up/Down Counters (Dual Clock With Reset)(CMOS???缃??/????板?锛?甫澶??????堕?锛?
|
Intersil Corporation Intersil, Corp.
|
AME8500AEETBF29 AME8500AEETDD46 AME8500BEETDD46 AM |
Reset time: 210mS; micropower uP reset device Reset time: 30mS; micropower uP reset device Reset time: 1.5mS; micropower uP reset device Reset time: 150mS; micropower uP reset device
|
AME
|
MAX6750KA30-T MAX6750KA27-T MAX6746KA48-T MAX6753K |
µP Reset Circuits with Capacitor-Adjustable Reset/Watchdog Timeout Delay 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 μP Reset Circuits with Capacitor-Adjustable Reset/Watchdog Timeout Delay muP Reset Circuits with Capacitor-Adjustable Reset/Watchdog Timeout Delay
|
Maxim Integrated Products, Inc. MAXIM INTEGRATED PRODUCTS INC Maxim Integrated Produc...
|