| PART |
Description |
Maker |
| SOMC |
Dual Inline Package, Small Outline Molded DIP, 14, 16, or 20 Pins, Rugged, Molded Case Construction, Highly Stable, Automatic Surface Mount Compatible, Reduces Assembly Costs,
|
Vishay
|
| EXR2400-BNRP-B EXR2400-BNRP-G |
Injection molded high performance flexible cable antenna
|
Laird Tech Smart Techno...
|
| STGIPS30C60-H |
SLLIMM(TM) small low-loss intelligent molded module IPM, 3-phase inverter - 30 A, 600 V short-circuit rugged IGBT
|
ST Microelectronics
|
| AN601 |
Unclamped Inductive Switching Rugged MOSFETs For Rugged Environments
|
Vishay Siliconix
|
| ADG604 ADG604YRU ADG604YRUZ-REEL7 ADG604YRU-REEL A |
1 pC Charge Injection, 100 pA Leakage CMOS ±5 V/5 V/3 V 4-Channel Multiplexer
1 pC Charge Injection, 100 pA Leakage CMOS 卤5 V/5 V/3 V 4-Channel Multiplexer
IC,ANALOG MUX,QUAD,1-CHANNEL,CMOS,TSSOP,14PIN,PLASTIC
1 PC CHARGE INJECTION, 100 PA LEAKAGE CMOS 5 V/5 V/3 V 4-CHANNEL MULTIPLEXER
1pC Charge Injection, Low Leakage CMOS 4-Channel Multiplexer
|
Analog Devices, Inc.
adi
|
| HLNB006-299TG NB017-01TG LNB011-04GG NB011-01GG HN |
6 POS MOLDED SIP SOCKET SIP6, IC SOCKET
17 POS MOLDED SIP SOCKET SIP17, IC SOCKET
11 POS MOLDED SIP SOCKET SIP11, IC SOCKET
10 POS MOLDED SIP SOCKET SIP10, IC SOCKET
32 POS MOLDED SIP SOCKET SIP32, IC SOCKET
15 POS MOLDED SIP SOCKET SIP15, IC SOCKET
16 POS MOLDED SIP SOCKET SIP16, IC SOCKET
|
Advanced Interconnections, Corp.
ADVANCED INTERCONNECTIONS CORP
|
| 1N4007G 1N4004G 1N4001G 1N4002G 1N4002 1N4006 1N40 |
Rectifiers(整流 1 A, 1000 V, SILICON, SIGNAL DIODE
(1N4001G - 1N4007G) Rectifiers(Rugged glass package / using a high temperature alloyed construction)
IC REG VOLT 4.8V 240MA SOT-23
Rectifiers(Rugged glass package/ using a high temperature alloyed construction)
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 1 A, 50 V, SILICON, SIGNAL DIODE
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 整流器（坚固的玻璃封装，采用高温合金建设
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 1 A, 400 V, SILICON, SIGNAL DIODE
|
PHILIPS[Philips Semiconductors]
http://
NXP Semiconductors N.V.
|
| T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED
DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional
PERFORMANCE CHARACTERISTICS
TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5
TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
| IMCH-1812 |
Surface Mount, High Current Molded Inductors
Surface Mount, Molded Inductors
SMD High-current molded Inductor;
up to IDC = 1 Amp; up to 330 µH;
|
Vishay Intertechnology,Inc.
|
| BYQ30ED BYQ30ED-100 BYQ30ED-200 BYQ30ED-150 |
CABLE FROM SUN WORKSTATION 5 FT
Rectifier diodes ultrafast/ rugged
Rectifier diodes ultrafast, rugged
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
| M74HC4851TTR M74HC4851 M74HC4851B1R M74HC4851MW M7 |
SINGLE 8 CHANNEL ANALOG MULTIPLEXER DEMULTIPLEXER WITH INJECTION CURRENT PROTECTION
SINGLE 8 CHANNEL ANALOG MUX/DEMUX WITH INJECTION CURRENT PROTECTION
SINGLE 8 CHANNEL ANALOG MUX/DEMUX WITH INJECTION CURRENT PROTECTION
|
ST Microelectronics
STMicroelectronics
|
| 1700 17173 17223 17103 17824 17104 17105 17106 171 |
Radial Lead Inductors
BOX 3.05X1.51X1.05 W/2 BTNS BLK
CAT5E PATCH CORD, 1FT BLACK, MOLDED
CAT5E PATCH CORD, 25FT YELLOW, MOLDED
CAT5E PATCH CORD, 30FT PINK, MOLDED
GIGABASE 350 CAT5E PATCH 15 FT, NON BOOT, WHITE
GIGABASE 350 CAT5E PATCH 10 FT, NON BOOT, WHITE
CAT5E PATCH CORD, 50FT PINK, MOLDED
GIGABASE 350 CAT5E PATCH 20 FT, NON BOOT, WHITE
CAT5E PATCH CORD, 100FT PINK, MOLDED
|
CANDD[C&D Technologies]
|
