|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN6914 2SA2043 / 2SC5709 PNP / NPN Epitaxial Planar Silicon Transistors 2SA2043 / 2SC5709 DC / DC Converter Applications Applications * Package Dimensions unit : mm 2045B [2SA2043 / 2SC5709] 6.5 5.0 4 Relay drivers, lamp drivers, motor drivers, strobes. Features * * * * * Adoption of FBET and MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. High allowable power dissipation. 0.85 0.7 1.5 2.3 0.5 5.5 7.0 0.8 1.6 1.2 0.6 7.5 0.5 1 2 3 1 : Base 2 : Collector 3 : Emitter 4 : Collector 2.3 2.3 SANYO : TP unit : mm 2044B [2SA2043 / 2SC5709] 6.5 5.0 4 2.3 1.5 0.5 5.5 7.0 0.85 0.5 0.8 1 0.6 2 3 2.5 1.2 1.2 0 to 0.2 1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP-FA 2.3 2.3 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52101 TS IM TA-3248 No.6914-1/5 2SA2043 / 2SC5709 Specifications ( ) : 2SA2043 Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Tc=25C Conditions Ratings (--)15 (--)15 (--)5 (--)10 (--)13 (--)1.2 1 15 150 --55 to +150 Unit V V V A A A W W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions VCB=(--)12V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)2V, IC=(-)500mA VCB=(--)10V, f=1MHz IC=(--)3A, IB=(-)60mA IC=(--)4.5A, IB=(-)90mA IC=(--)3A, IB=(-)60mA IC=(--)10A, IE=0 IC=(--)1mA, RBE= IE=(-)10A, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. (--)15 (--)15 (--)5 30 (120)180 (14)25 200 (220)280 (90)50 (--110)120 (-)0.85 (--170)180 (--)1.2 (--160)180 (--240)280 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF mV mV V V V V ns ns ns Unit A A Swicthing Time Test Circuit PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 RB RL + + 470F VCC=5V 100F VBE= --5V IC=20IB1= --20IB2=3A For PNP, the polarity is reversed. No.6914-2/5 2SA2043 / 2SC5709 --9 --8 IC -- VCE 2SA2043 --90mA A --80m 0mA --7 --60mA 9 8 IC -- VCE 2SC5709 90mA 80m A Collector Current, IC -- A Collector Current, IC -- A --7 --6 --5 --4 --3 --2 --1 0 0 --0.1 --0.2 --0.3 --0.4 7 70mA 60mA 50mA 40mA 30mA 20mA -- --40mA --30mA --20mA --10mA 5 4 3 2 1 10 0 10 0m m A --50mA 6 A 10mA IB=0 --0.5 IT00170 0 0 0.1 0.2 0.3 0.4 IB=0 0.5 IT00171 Collector-to-Emitter Voltage, VCE -- V --9 --8 IC -- VBE Collector-to-Emitter Voltage, VCE -- V 9 8 IC -- VBE 2SA2043 VCE= --2V 2SC5709 VCE=2V Collector Current, IC -- A --6 --5 --4 --3 Collector Current, IC -- A --7 7 6 5 4 3 2 1 0 0 Ta=7 5C 25C --25C --2 --1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 0.2 0.4 0.6 Ta=7 5C 25C --25 C 0.8 1.0 1.2 1.4 IT00173 Base-to-Emitter Voltage, VBE -- V 1000 7 5 IT00172 1000 hFE -- IC Base-to-Emitter Voltage, VBE -- V hFE -- IC Ta=75C 2SA2043 VCE= --2V 7 5 2SC5709 VCE=2V Ta=75C --25C DC Current Gain, hFE DC Current Gain, hFE 3 2 25C --25C 3 2 25C 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A --1000 7 5 7 --10 IT00174 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 VCE(sat) -- IC Collector Current, IC -- A 1000 5 7 10 IT00175 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 --100 7 5 3 2 --10 7 5 --0.01 2SA2043 IC / IB=20 7 5 3 2 100 7 5 3 2 10 7 5 0.01 2SC5709 IC / IB=20 =7 Ta C 5 25C 5 --2 C = Ta C 75 -- 25 C 25C 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT00176 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 7 10 IT00178 No.6914-3/5 2SA2043 / 2SC5709 --1000 7 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 1000 VCE(sat) -- IC 2SC5709 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 --100 7 5 3 2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 2SA2043 IC / IB=50 7 5 3 2 100 7 5 3 2 10 7 5 0.01 =7 Ta 5C 5C --2 25C = Ta 75 C 25C C 5 --2 3 Collector Current, IC -- A --10000 5 7 --10 IT00177 2 3 5 7 0.1 2 3 5 7 1.0 2 3 VBE(sat) -- IC Collector Current, IC -- A 10000 5 7 10 IT00179 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 7 5 3 2 2SA2043 IC / IB=50 7 5 3 2 2SC5709 IC / IB=50 --1000 7 5 3 2 Ta= --25C 75C 25C 1000 7 5 3 2 100 0.01 Ta= --25C 75C 25C --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 1000 7 5 5 7 --10 IT00180 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Cob -- VCB Collector Current, IC -- A 1000 7 5 5 7 10 IT00181 Cob -- VCB 2SA2043 f=1MHz Output Capacitance, Cob -- pF 2SC5709 f=1MHz Output Capacitance, Cob -- pF 3 2 100 7 5 3 2 10 7 5 3 2 1.0 --1.0 2 3 5 7 --10 2 3 3 2 100 7 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 --0.01 IT00182 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 f T -- IC Collector-to-Base Voltage, VCB -- V IT00183 f T -- IC Gain-Brandwidth Product, f T -- MHz Gain-Brandwidth Product, f T -- MHz 2SA2043 VCE= --2V 2SC5709 VCE=2V 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT00184 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 7 10 IT00185 No.6914-4/5 2SA2043 / 2SC5709 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ASO ICP=13A IC=10A 100ms 10ms 1ms 1.2 PC -- Ta 2SA2043 / 2SC5709 Collector Current, IC -- A DC DC op era op era Collector Dissipation, PC -- W 10 0 s s 0 50 1.0 0.8 tio tio n( n( Tc Ta = =2 25 C 5 C No 0.6 he ) at sin k ) 0.4 0.01 0.01 2SA2043 / 2SC5709 Tc=25C Single pulse For PNP, minus sign is omitted 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 0.2 0 0 20 IT03036 Collector-to-Emitter Voltage, VCE -- V 18 16 15 14 12 10 8 6 4 2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 40 60 80 100 120 140 160 IT03037 PC -- Tc 2SA2043 / 2SC5709 Collector Dissipation, PC -- W 140 160 Case Temperature, Tc -- C IT03038 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2001. Specifications and information herein are subject to change without notice. PS No.6914-5/5 |
Price & Availability of 2SA2043 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |