 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP561G TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP561G Triac Driver Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA TLP561G consists of a zero voltage crossing turn-on photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. * * * * * * Peak off-state voltage: 400V(min.) On-state current: 100mA(max.) Isolation voltage: 2500Vrms(min.) UL recognized: file no. E67349 Isolation operating voltage: 2500Vac or 300Vdc for isolation groupe C*1 Trigger LED current Classification* (IFT5) (IFT7) Standard Trigger LED Current (mA) VT = 6V, Ta = 25C Min. Max. 5 7 10 T5 T5, T7 T5, T7, blank Marking Of Classification TOSHIBA Weight: 0.39g 11-7A9 *Ex. (IFT5); TLP561G (IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP561G (IFT5): TLP561G *1: According to VDE0110, table 4. Pin Configuration (top view) 1 2 3 ZC 6 4 1 : ANODE 2 : CATHODE 3 : N.C. 4 : TERMINAL 1 6 : TERMINAL 2 1 2002-09-25 TLP561G Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100s pulse, 100pps) Reverse voltage Junction temperature Off-state ontput terminal voltage On-state RMS current Detector Ta = 25C Ta = 70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol BVS Rating 50 -0.7 1 5 125 400 100 50 -1.1 2 1.2 115 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (Pw = 10ms, DC = 10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1 min., R.H. 60%) Recommended Operating Conditions Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C 2 2002-09-25 TLP561G Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate or rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt (c) IF = 10mA VR = 5V V = 0, f = 1MHz VDRM = 400V ITM = 100mA Vin = 120Vrms, Ta = 85C Vin = 30Vrms, IT = 15mA (Fig.1) (Fig.1) Test Condition Min. 1.0 200 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 100 3.0 Unit V A pF nA V mA V / s V / s Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Inhibit voltage Leakage in inhibited state Capacitance (input to output) Isolation resistance Symbol IFT VIH IIH CS RS Test Condition VT = 3V, RL = 100 IF = rated IFT IF = rated IFT VT = rated VDRM VS = 0, f = 1MHz VS = 500V AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x1010 2500 Typ. 5 100 0.8 1014 5000 5000 Max. 10 40 300 Unit mA V A pF Vrms Vdc Fig.1: dv / dt test circuit Rin VCC + - 120 1 2 3 4 6 Vin 5V, VCC 0V dv / dt () dv / dt RL 4k 3 2002-09-25 TLP561G IF - Ta 100 200 IT(RMS) - Ta Allowable forward current IF (mA) 80 160 R. M. S. On-state current IT (RMS) (mA) 60 120 40 80 20 40 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) 3000 IFP - DR Pulse width 100s Ta = 25C 100 50 Ta = 25C IF - VF current (mA) Forward current IF 1000 500 300 30 Allowable pulse forward IFP (mA) 10 5 3 100 50 30 1 0.5 0.3 0.1 0.6 10 3 10-3 3 10-2 3 10 -1 3 100 Duty cycle ratio DR 0.8 1.0 1.2 1.4 1.6 1.8 Forward voltage VF (V) VF/Ta -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 - IF 1000 500 IFP - VFP Forward voltage temperature coefficient VF/Ta (mV/C) (mA) Pulse forward current IFP 300 100 50 30 10 5 3 Pulse width10s Repetitive Frequency = 100Hz Ta = 25 0.3 0.5 1 3 5 10 30 50 1 0.6 1.0 1.4 1.8 2.2 2.6 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2002-09-25 TLP561G Normalized 3 2 IFT - Ta VT = 3V 3 2 Normalized IH - Ta IFT current unit) Holding current Trigger LED (arbitrary 0.5 (arbitrary unit) 1.2 1 IH 40 60 100 1.2 1 0.5 0.3 0.3 0.1 -40 -20 0 20 80 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta () Ambient temperature Ta () 10 3 Normalized VDRM = Rated IDRM - Ta 1.4 Normalized Off-state output terminal voltage VDRM (arbitrary unit) VDRM - Ta IDRM 1.2 off-state current (arbitrary unit) 10 2 1.0 0.8 10 1 0.6 Peak 10 0 0.4 0 20 40 60 80 100 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta () Ambient temperature Ta () 3 2 Normalized VIH - Ta 3 2 Normalized IIH - Ta VIH Inhibit current IIH Inhibit voltage unit) (arbitrary (arbitrary unit) 1.2 1 1.2 1 0.5 0.5 0.3 0.3 IF = Rated IFT VT = Rated VDRM IF = Rated 0.1 -40 IFT 0.1 -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Ambient temperature Ta () Ambient temperature Ta () 5 2002-09-25 TLP561G RESTRICTIONS ON PRODUCT USE * 000707EBC TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. * * * * * 6 2002-09-25 |
Price & Availability of TLP561G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |