 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DUAL INPUT LOW DROPOUT REGULATOR February 26, 1999 EZ1580/EZ1581 EZ1582/EZ1583 TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The EZ158X family of high performance positive voltage regulators are designed for use in applications requiring very low dropout voltage at 7, 5, 3 and 1.5 amps. When supplying 2.5V on motherboards where both 5V and 3.3V supplies are available, the superior dropout characteristics of the EZ158X result in reduced heat dissipation compared to regular LDOs, thus allowing heat sink size reduction. Additionally, the EZ158X provides excellent regulation over variations in line, load and temperature. Remote sense operation allows compensating for trace, connector and other resistive losses. Outstanding features include very low dropout performance at rated current, fast transient response, remote sense, internal current limiting, thermal shutdown and safe operating area protection of the output device. The EZ158X is a five terminal adjustable voltage regulator available in the popular 5 pin TO-220 and TO-263 plastic packages. ORDERING INFORMATION DEVICE EZ1580CT-X.X EZ1581CT-X.X EZ1582CT-X.X EZ1583CT-X.X EZ1580CM-X.X EZ1581CM-X.X EZ1582CM-X.X EZ1583CM-X.X TO-263, 5-pin(2) PACKAGE IOUT (A) TO-220, 5-pin 7 5 3 1.5 7 5 3 1.5 See Note (1) VOUT (V) See Note (1) Notes: (1) Where -X.X denotes voltage options. Available voltages are: 1.5V and 2.5V. Leave blank for adjustable version (1.3 to 5.7V). (2) Add suffix `TR' for tape and reel (TO-263). FEATURES *= 540mV dropout @ 7A in dual supply mode *= *= *= *= (EZ1580) Remote sense operation Fast transient response 0.5% initial accuracy 5 Pin TO-220 and TO-263 packages ABSOLUTE MAXIMUM RATINGS Parameter Input Voltage VPOWER VCONTROL Power Dissipation Thermal Resistance Junction to Case EZ1580/1 TO-220 EZ1580/1 TO-263 EZ1582/3 TO-220 EZ1582/3 TO-263 Thermal Resistance Junction to Ambient EZ158X TO-220 EZ158X TO-263 Operating Junction Temperature Range Storage Temperature Range Lead Temperature (Soldering) 10 Sec. Symbol VP VC PD Maximum 7 13.2 Internally Limited Units V W APPLICATIONS *= *= *= *= *= Microprocessor supplies Split plane microprocessor supplies Pentium(R) Processor P54C and P55C PowerPCTM 603/604EV AMD5K86TM, AMD K6 JC 2 2 3 3 C/W BLOCK DIAGRAM JA TJ 50 60 0 to 125 C/W C TSTG TLEAD -65 to 125 260 C C Pentium is a registered trademark of Intel Corporation. PowerPC is a trademark of IBM. AMD5K86 and K6 are trademarks of Advanced Micro Devices. 1 (c) 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 DUAL INPUT LOW DROPOUT REGULATOR February 26, 1999 EZ1580/EZ1581 EZ1582/EZ1583 PIN CONFIGURATION PIN DESCRIPTION Pin Pin Name 1 2 SENSE Pin Function This pin is the positive side of the reference voltage for this device. With this pin it is possible to Kelvin sense the output voltage at the load. ADJUST / This pin is the negative side of the reference voltage for the device. Transient response can be improved by adding a small bypass capacitor from the adjust pin to ground. GROUND This pin is the bottom end of the internal resistor feedback chain for fixed output voltage parts, and should be connected to ground. 3 4 OUTPUT This is the power output of the device, and is electrically connected to the TAB. CONTROL This pin is the supply pin for the control circuitry for the device. The current flow into this pin will be approximately 1% of the output current. For the device to regulate, the voltage at this pin must be between 1.0V and 1.3V greater than the output voltage (see dropout specifications). POWER This is the collector input to the power device of the EZ158X. The output load current is supplied through this pin. For the device to regulate, the voltage on this pin must be between 0.1V and 0.7V greater than the output voltage, depending upon load current (see dropout specifications). 5 2 (c) 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 DUAL INPUT LOW DROPOUT REGULATOR February 26, 1999 EZ1580/EZ1581 EZ1582/EZ1583 ELECTRICAL CHARACTERISTICS Test Conditions Parameter Reference Voltage EZ1583 EZ1582 EZ1581 EZ1580 Line Regulation Load Regulation EZ1583 EZ1582 EZ1581 EZ1580 Minimum Load Current (2) Control Pin Current EZ1583 EZ1582 EZ1581 EZ1580 Adjust Pin Current Current Limit EZ1583 EZ1582 EZ1581 EZ1580 Ripple Rejection (4) EZ1583 EZ1582 EZ1581 EZ1580 Thermal Regulation (5) Dropout Voltage Minimum VCNTL EZ1583 EZ1582 EZ1581 EZ1580 (7) (3) (1) Test Limits (6) TJ Symbol VREF VCNTL Volts 2.75 2.7 - 12 VPWR Volts 2.00 2.05 - 5.5 Amps 0.01 0.01 - 1.5 0.01 - 3.0 0.01 - 5.0 0.01 - 7.0 0.01 0.01 - 1.5 0.01 - 3.0 0.01 - 5.0 0.01 - 7.0 Min 1.243 1.237 Typ 1.250 1.250 Max 1.257 1.263 Units 25C O.T. V REG(LINE) 2.5 - 12 1.75 - 5.5 O.T. 1.0 3.0 mV REG(LOAD) 2.75 2.1 O.T. 1.0 5.0 mV IO 5 3.3 1.5 3.0 5.0 7.0 0.01 O.T. 5.0 6.0 30 33 60 50 1.6 3.1 5.1 7.1 10 mA IC 2.75 2.05 O.T. 120 mA IADJ 2.75 2.05 O.T. 120 A ICL 2.75 2.05 O.T. A RA 3.75 3.75 0.75 1.5 2.5 3.5 25C 60 80 dB REG(THERMAL) 0.002 0.02 %/W VC-VO 2.05 1.5 3.0 5.0 7.0 O.T. 1.00 1.05 1.10 1.15 1.15 1.18 1.25 1.30 V Dropout Voltage (7) Minimum VPOWER EZ1583 EZ1582 EZ1581 EZ1580 VP-VO 2.75 1.5 3.0 5.0 7.0 25C O.T. 25C O.T. 25C O.T. 25C O.T. 0.40 0.50 0.40 0.50 0.40 0.50 0.54 0.70 0.50 0.60 0.50 0.60 0.50 0.60 0.62 0.80 V NOTES (1) Unless otherwise specified, VOUT = VSENSE, VADJ = 0V. (2) Required to maintain regulation. Voltage set resistors R1, R2 are usually utilized for minimum load current. (3) Current used to drive the output section; minimum value equals the standby current of the device. (4) VC = VP = 3.75V Avg; VRIPPLE = 1VPK-PK. (5) 30ms. (6) Over Temp (O.T.) = over specified operating junction temperature range. (7) Minimum input/output voltage required to maintain 1% regulation. 3 (c) 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 DUAL INPUT LOW DROPOUT REGULATOR February 26, 1999 EZ1580/EZ1581 EZ1582/EZ1583 TYPICAL APPLICATIONS Adjustable Output Parts (3) (1)(2) U1 1 SENSE EZ158XCX VREF 3 3.3V POWER IN 5V CONTROL IN 5 4 POWER OUTPUT CONTROL ADJ 2.5V OUT R1 124 C3 68uF C1 33uF C2 10uF 2 R2 124 GROUND GROUND VOUT R2 o ae = VREF c 1 + + I ADJ * R 2 R1 e Fixed Output Parts U1 1 SENSE 3.3V POWER IN 5V CONTROL IN 5 4 POWER OUTPUT CONTROL GND C1 33uF GROUND C2 10uF 2 C3 68uF GROUND 3 EZ158XCX-2.5 2.5V OUT U1 1 SENSE 2.5V POWER IN 3.3V CONTROL IN 5 4 POWER EZ158XCX-1.5 OUTPUT CONTROL GND C1 47uF GROUND C2 10uF 2 3 1.5V OUT C3 100uF GROUND NOTES: (1) Capacitor values are for reference only. Good quality, low ESR tantalum or aluminum electrolytic capacitors should be used. Increasing the value of the output capacitor will improve the overall transient response. (2) If the same voltage is input to both POWER and CONTROL, then the dropout voltage will become 1.3V maximum. (3) A small (~0.033F) capacitor can be used to bypass the ADJUST pin to improve transient response, if needed. 4 (c) 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 DUAL INPUT LOW DROPOUT REGULATOR February 26, 1999 EZ1580/EZ1581 EZ1582/EZ1583 APPLICATION INFORMATION The EZ158X is a low dropout regulator designed to power the next generation of low voltage, split voltage plane processors, such as the Pentium(R) Processor P55C, the IBM PowerPCTM 603EV and 604EV and the AMD5K86TM and K6 Processors. The dropout voltage is minimized by utilizing a separate input voltage, VCONTROL, which should exceed VOUT by at least 1.3V. The 2.5V power for the load (microprocessor core) can be derived from a 3.3V system supply. Since the efficiency of a linear regulator is the ratio of the output to the input voltage, heat dissipation is reduced by using a 3.3 input, thereby lowering heatsink and cooling fan costs. For a load of 7A at 2.5V, the regulator would dissipate 17.5W when converting from 5V, but only 5.6W from a 3.3V input. Remote Kelvin sensing of the output voltage can be achieved by connecting the sense pin to the output at the load. Remote sensing will reduce errors associated with resistive trace losses between regulator and processor. DEVICE OUTLINE - TO-220, 5 PIN DEVICE OUTLINE - TO-263, 5 PIN MINIMUM LAND PATTERN - TO-263, 5 PIN 5 (c) 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 |
Price & Availability of EZ1582
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |