|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HD74ALVCH16374 16-bit D-type Flip Flops with 3-state Outputs ADE-205-123B (Z) 3rd. Edition December 1999 Description The HD74ALVCH16374 has sixteen edge trigger D type flip flops with three state outputs in a 48 pin package. Data at the D inputs meeting set up requirements, are transferred to the Q outputs on positive going transitions of the clock input. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features * * * * * VCC = 2.3 V to 3.6 V Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25C) High output current 24 mA (@V CC = 3.0 V) Bus hold on data inputs eliminates the need for external pullup / pulldown resistors. HD74ALVCH16374 Function Table Inputs OE H L L L H: L: X: Z: : Q0 : CK X H or L D X L H X Output Q Z L H Q0 High level Low level Immaterial High impedance Low to high transition Level of Q before the indicated steady input conditions were established. 2 HD74ALVCH16374 Pin Arrangement 1OE 1 1Q1 2 1Q2 3 GND 4 1Q3 5 1Q4 6 VCC 7 1Q5 8 1Q6 9 GND 10 1Q7 11 1Q8 12 2Q1 13 2Q2 14 GND 15 2Q3 16 2Q4 17 VCC 18 2Q5 19 2Q6 20 GND 21 2Q7 22 2Q8 23 2OE 24 G Q G Q CK D CK D G Q G Q G Q G Q G Q G Q G Q G Q G Q G Q G Q G Q G Q G Q CK D CK D CK D CK D CK D CK D CK D CK D CK D CK D CK D CK D 48 1CK 47 1D1 46 1D2 45 GND 44 1D3 43 1D4 42 VCC 41 1D5 40 1D6 39 GND 38 1D7 37 1D8 36 2D1 35 2D2 34 GND 33 2D3 32 2D4 31 VCC 30 2D5 29 2D6 28 GND 27 2D7 26 2D8 25 2CK CK D CK D (Top view) 3 HD74ALVCH16374 Absolute Maximum Ratings Item Supply voltage range Input voltage *1 *1, 2 Symbol VCC VI VO I IK I OK IO I CC or IGND PT Tstg Ratings -0.5 to 4.6 -0.5 to 4.6 -0.5 to VCC+0.5 -50 50 50 100 0.85 -65 to +150 Unit V V V mA mA mA mA W C Conditions Output voltage Input clamp current Output clamp current Continuous output current VCC, GND current / pin Maximum power dissipation at Ta = 55C (in still air) *3 Storage temperature Notes: VI < 0 VO < 0 or VO > VCC VO = 0 to VCC TSSOP Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. 1. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The maximum package power dissipation is calculated using a junction temperature of 150C and a board trace length of 750 mils. Recommended Operating Conditions Item Supply voltage Input / Output voltage Symbol VCC VI VO Operating temperature Output current Ta I OH Ratings 2.3 to 3.6 0 to V CC 0 to V CC -40 to 85 -12 -12 -24 I OL 12 12 24 Input rise / fall time t r, t f 10 Unit V V V C mA mA mA mA mA mA ns/V VCC = 2.3 V VCC = 2.7 V VCC = 3.0 V VCC = 2.3 V VCC = 2.7 V VCC = 3.0 V OE, CK, D Q Conditions Note: Unused or floating control pins must be held high or low. 4 HD74ALVCH16374 Electrical Characteristics Ta = -40 to 85C Item Input voltage Symbol VCC (V) VIH *1 Min 1.7 2.0 -- -- Max -- -- 0.7 0.8 -- -- -- -- -- -- 0.2 0.4 0.7 0.4 0.55 5.0 -- -- -- -- 500 10 40 750 Unit V V V V V V V V V V V V V V V A A A A A A A A A Test Conditions 2.3 to 2.7 2.7 to 3.6 VIL 2.3 to 2.7 2.7 to 3.6 Output voltage VOH Min to Max VCC-0.2 2.3 2.3 2.7 3.0 3.0 2.0 1.7 2.2 2.4 2.0 I OH = -100 A I OH = -6 mA, VIH = 1.7 V I OH = -12 mA, VIH = 1.7 V I OH = -12 mA, VIH = 2.0 V I OH = -12 mA, VIH = 2.0 V I OH = -24 mA, VIH = 2.0 V I OL = 100 A I OL = 6 mA, VIL = 0.7 V I OL = 12 mA, VIL = 0.7 V I OL = 12 mA, VIL = 0.8 V I OL = 24 mA, VIL = 0.8 V VIN = VCC or GND VIN = 0.7 V VIN = 1.7 V VIN = 0.8 V VIN = 2.0 V VIN = 0 to 3.6 V VOUT = VCC or GND VIN = VCC or GND One input at (V CC-0.6)V, other inputs at V CC or GND VOL Min to Max -- 2.3 2.3 2.7 3.0 -- -- -- -- -- 45 -45 75 -75 -- -- -- -- Input current I IN I IN(hold) 3.6 2.3 2.3 3.0 3.0 3.6 Off state output current *2 I OZ I CC 3.6 3.6 3.0 to 3.6 Quiescent supply current I CC Notes: 1. For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. 2. For I/O ports, the parameter I OZ includes the input leakage current. 5 HD74ALVCH16374 Switching Characteristics Ta = -40 to 85C Item Maximum clock frequency Symbol VCC (V) f max 2.50.2 2.7 3.30.3 Propagation delay time t PLH t PHL 2.50.2 2.7 3.30.3 Output enable time t ZH t ZL 2.50.2 2.7 3.30.3 Output disable time t HZ t LZ 2.50.2 2.7 3.30.3 Setup time t su 2.50.2 2.7 3.30.3 Hold time th 2.50.2 2.7 3.30.3 Pulse width tw 2.50.2 2.7 3.30.3 Input capacitance CIN 3.3 3.3 Output capacitance CO 3.3 Min 150 150 150 1.0 -- 1.0 1.0 -- 1.0 1.7 -- 1.2 2.1 2.2 1.9 0.6 0.5 0.5 3.3 3.3 3.3 -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.0 6.0 7.0 Max -- -- -- 5.3 4.9 4.2 6.2 5.9 4.8 5.3 4.7 4.3 -- -- -- -- -- -- -- -- -- -- -- -- Unit MHz MHz MHz ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns pF pF pF Control inputs Inputs OE Q OE Q CK Q From (Input) To (Output) 6 HD74ALVCH16374 Test Circuit VCC VCC Output Input See Function Table 1OE, 2OE 1Q1 to 2Q8 CL = 50 pF 1D1 to 2D8 500 S1 450 50 Scope OPEN *1 See under table GND Pulse Generator Zout = 50 Input Pulse Generator Zout = 50 1CK, 2CK Symbol t PLH / t PHL t su / t h / t w t ZH/ t HZ t ZL / t LZ Vcc=2.50.2V Vcc=2.7V, 3.30.3V OPEN GND 4.6 V OPEN GND 6.0 V Note: 1. CL includes probe and jig capacitance. Waveforms - 1 tr Input CK 10 % tr Input D 90 % 10 % t PLH Output Q Vref 90 % 90 % Vref 10 % tf 90 % 10 % t PHL Vref VOL Vref GND VIH GND VOH tf VIH 7 HD74ALVCH16374 Waveforms - 2 tr Input CK 10 % tw tsu Input D Vref th VIH Vref GND 90 % 90 % Vref Vref 10 % tw tf VIH Vref GND Waveforms - 3 tf Input G 90 % Vref 10 % t ZL Waveform - A t ZH Waveform - B Vref Vref t HZ VOH - 0.3 V tr 90 % Vref 10 % t LZ VIH GND V OH1 VOL + 0.3 V VOL VOH V OL1 TEST VIH Vref VOH1 VOL1 Notes: 1. 2. 3. 4. Vcc=2.50.2V Vcc=2.7V, 3.30.3V 2.3 V 1.2 V 2.3 V GND 2.7 V 1.5 V 3.0 V GND t r = 2.5 ns, tf = 2.5 ns Input waveform : PRR = 10 MHz, duty cycle 50%. Waveform-A shows input conditions such that the output is "L" level when enable by the output control. Waveform-B shows input conditions such that the output is "H" level when enable by the output control. 8 HD74ALVCH16374 Package Dimensions Unit : mm 12.50 -0.1 48 +0.3 25 6.10 +0.3 -0.1 1 0.20 +0.1 -0.05 0.50 0.08 M 0.65 Max 24 0.15 0.05 8.10 0.3 10 Max 0.50 0.1 Hitachi code EIAJ code JEDEC code TTP-48DC -- -- 0.10 1.20 max 0.05 Min 9 HD74ALVCH16374 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/index.htm For further information write to: Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. 10 |
Price & Availability of HD74ALVCH16374 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |