 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TMPG06-6.8 THRU TMPG06-43A AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 43 Volts D * Case Style TMPG-06 Peak Pulse Power - 400 Watts FEATURES 1.0 (25.4) MIN. 0.100 (2.54) 0.090 (2.29) 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.025 (0.559) Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Designed for the hood applications Available in uni-directional only Exclusive patented PARTM oxide passivated chip construction 400W peak pulse power capability on 10/1000s waveform, repetition rate (duty cycle): 1.0% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) For devices with V(BR)10V, ID are typically less than 1.0A High temperature soldering guaranteed: 300C/10 seconds 0.375 (9.5mm) lead length, 5lbs (2.3 kg) tension P A T E N T E MECHANICAL DATA Dimensions in inches and (millimeters) * Patent #'s 4,980,315 5,166,769 5,278,094 Case: Molded plastic over a passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram Available in uni-directional only MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak power dissipation with a 10/1000s waveform (NOTE 1, FIG. 1) Peak pulse power current with a 10/1000s waveform (NOTE1,2, FIG. 3) Steady state power dissipation at TL=75C lead lengths 0.25" (6.33mm) (NOTE 2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 25A (NOTE 3) Operating junction and storage temperature range PPPM IPPM PM(AV) Minimum 400 SEE TABLE 1 Watts Amps Watts 1.0 IFSM VF TJ, TSTG 40.0 3.5 -65 to +185 Amps Volts C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25C per Fig. 2 (2) Mounted on copper pads area of 1.6 x 1.6" (40 x 40mm) (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum 1/25/99 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWm (Volts) Maximum Reverse Leakage at VWM ID (A) Maximum Reverse Leakage at VwM TJ=150C ID (A) Peak Pulse Current IPPM (NOTE 2) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) TMPG06-6.8 TMPG06-6.8A TMPG06-7.5 TMPG06-7.5A TMPG06-8.2 TMPG06-8.2A TMPG06-9.1 TMPG06-9.1A TMPG06-10 TMPG06-10A TMPG06-11 TMPG06-11A TMPG06-12 TMPG06-12A TMPG06-13 TMPG06-13A TMPG06-15 TMPG06-15A TMPG06-16 TMPG06-16A TMPG06-18 TMPG06-18A TMPG06-20 TMPG06-20A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.0 300 300 150 150 50.0 50.0 10.0 10.0 5.0 5.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 27.8 28.6 25.6 26.5 24.0 24.8 21.7 22.4 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 0.057 0.057 0.060 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 (Cont'd) Breakdown Voltage V(BR) (Volts) (NOTE 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (A) Maximum Reverse Leakage at VwM TJ=150C ID (A) Peak Pulse Current IPPM (NOTE 2) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) TMPG06-22 TMPG06-22A TMPG06-24 TMPG06-24A TMPG06-27 TMPG06-27A TMPG06-30 TMPG06-30A TMPG06-33 TMPG06-33A TMPG06-36 TMPG06-36A TMPG06-39 TMPG06-39A TMPG06-43 TMPG06-43A 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 31.9 30.6 34.2 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 NOTES: (1) V(BR) measured after IT applied for 300s, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 RATING AND CHARACTERISTIC CURVES TMPG06-6.8 THRU TMPG06-43A FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % 100 PPPM, PEAK PULSE POWER, kW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25C 10 TMPG06-10 - TMPG06-43A 75 50 1.0 TMPG06-6.8 - TMPG06-9.1A 25 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms td, PULSE WIDTH, sec. 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C FIG. 3 - PULSE WAVEFORM 150 IPPM PEAK PULSE CURRENT, % tr=10sec. PEAK VALUE IPPM PULSE WIDTH (td) IS DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of Ipp FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 TJ=25C f=1 MHz Vsig=50mVp-p 100 CJ, JUNCTION CAPACITANCE, pF HALF VALUE - IPP 2 1,000 MEASURED at ZERO BIAS 50 10/1000sec. WAVEFORM as DEFINED by R.E.A. 0 td 100 MEASURED at STAND-OFF VOLTAGE, VWM 0 1.0 2.0 t, TIME, ms 3.0 4.0 FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV) STEADY STATE POWER DISSIPATION, WATTS 1.00 L 0.75 = 0.375" (9.5mm) LEAD LENGTH 60HZ RESISTIVE OR INDUCTIVE LOAD 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.6 x 1.6 x .040" (40 x 40 x 1mm) COPPER HEAT SINKS IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 0.50 100 TL=75C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.25 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE,C 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 |
Price & Availability of TMPG06-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |