View INA10386_131360.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Low Noise, Cascadable Silicon Bipolar MMIC Amplifier Technical Data
INA-10386
Features
* Cascadable 50 Gain Block * 3 dB Bandwidth: DC to 1.8 GHz * 26 dB Typical Gain at 1.5 GHz * 10 dBm Typical P1dB at 1.5 GHz * Unconditionally Stable (k>1) * Surface Mount Plastic Package
feedback amplifier housed in a low cost surface mount plastic package. It is designed for narrow or wide bandwidth commercial and industrial applications that require high gain and moderate power. The INA series of MMICs is fabricated using HP's 10 GHz fT, 25 GHz f MAX, ISOSATTM-I silicon bipolar process which uses nitride self-alignment, submicrometer lithography, trench isolation, ion implantation, gold metallization and polyimide intermetal dielectric and scratch protection to achieve excellent performance, uniformity and reliability.
86 Plastic Package
Description
The INA-10386 is a low-noise silicon bipolar Monolithic Microwave Integrated Circuit (MMIC)
Typical Biasing Configuration
VCC Id = 45 mA nom. RFC (Optional) Rbias Cblock RF IN 1 2 4 3 Vd = 6.0 V Cblock RF OUT
5965-9679E
6-112
INA-10386 Absolute Maximum Ratings
Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 80 mA 750 mW +13 dBm 150C -65 to 150C Thermal Resistance: jc = 100C/W
Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25C. 3. Derate at 10 mW/C for TC > 75C.
INA-10386 Electrical Specifications[1], TA = 25C
Symbol
GP GP f3 dB ISO VSWR NF P1 dB IP3 tD Id dV/dT
Parameters and Test Conditions: Vd = 6V, ZO = 50
Power Gain (|S21| 2) Gain Flatness 3 dB Bandwidth[2] Reverse Isolation (|S12| 2) Input VSWR Output VSWR 50 Noise Figure Output Power at 1 dB Gain Compression Third Order Intercept Point Group Delay Device Current Device Voltage Temperature Coefficient f = 2.0 GHz f = 0.1 to 2.0 GHz f = 0.1 to 2.0 GHz f = 1.5 GHz f = 1.5 GHz f = 1.5 GHz f = 1.5 GHz f = 1.5 GHz f = 0.1 to 1.5 GHz
Units
dB dB GHz dB
Min.
23.0
Typ.
26.0 1.0 1.8 30 1.5:1 1.5:1
Max.
dB dBm dBm psec mA mV/C 35
3.8 10 23 250 45 +10 55
Notes: 1. The recommended operating current range for this device is 40 to 60 mA. Typical performance as a function of current is on the following page.
INA-10386 Part Number Ordering Information
Part Number INA-10386-TR1 INA-10386-BLK No. of Devices 1000 100 Container 7" Reel Antistatic Bag
6-113
INA-10386 Typical Scattering Parameters (ZO = 50 , TA = 25C, Vd = 6 V)
Freq. GHz S11 Mag Ang dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang k
0.05 0.10 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00
.12 .11 .13 .17 .21 .21 .19 .14 .07 .08
-9 -17 -79 -137 171 127 106 86 85 148
26.6 26.7 26.7 26.8 26.0 23.6 21.7 19.2 16.8 14.2
21.4 21.6 21.6 21.9 20.0 15.1 12.2 9.1 6.9 5.1
-4 -8 -38 -80 -126 -168 159 127 97 70
-35.2 -35.6 -35.7 -34.1 -33.1 -29.9 -28.4 -26.7 -24.8 -24.7
.017 .017 .016 .020 .023 .032 .038 .048 .058 .058
1 3 10 43 53 55 58 55 50 51
.11 .12 .07 .03 .07 .07 .04 .05 .06 .04
-3 -10 -40 18 32 9 42 56 47 40
1.51 1.50 1.59 1.33 1.26 1.23 1.27 1.37 1.44 1.82
INA-10386 Typical Performance, TA = 25C
(unless otherwise noted)
30 Gain Flat to DC 50 25 40 60 TC = +85C TC = +25C TC = -25C 30 0.1 - 1.0 GHz 25 2.0 GHz
Gp (dB)
Id (mA)
Gp (dB)
20
30 20
20
15 10 10 0.1 0 0 2 4 Vd (V) 6 8
15
0.2
0.5
1.0
2.0
5.0
10 35
45 Id (mA)
55
65
FREQUENCY (GHz)
Figure 1. Typical Gain and Noise Figure vs. Frequency, TA = 25C, Vd = 6 V.
Figure 2. Device Current vs. Voltage.
Figure 3. Power Gain vs. Current.
20 27
4.5
Gp (dB)
Gp P1 dB 15 Id = 55 mA 4.0 13 11
26
Id = 40, 55 mA
P1 dB (dBm)
P1 dB (dBm)
25
10
NF (dB)
Id = 45 mA
3.5 Id = 45, 50 mA 3.0
5.0
9 NF
NF (dB)
4.0 3.0 2.0 -55 -25
5
+25
+85
+125
0 .02
.05
0.1
0.2
0.5
1.0
2.0
2.5 .02
.05
0.1
0.2
0.5
1.0
2.0
TEMPERATURE (C)
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 4. Output Power and 1 dB Gain Compression, NF and Power Gain vs. CaseTemperature, f = 1.5 GHz, Vd = 6 V.
Figure 5. Output Power at 1 dB Gain Compression vs. Frequency.
Figure 6. Noise Figure vs. Frequency.
6-114
86 Plastic Package Dimensions
0.51 0.13 (0.020 0.005) 4
103
45 1
C L 3 2.34 0.38 (0.092 0.015)
2 2.67 0.38 (0.105 0.15) 0.203 0.051 (0.006 0.002)
1.52 0.25 (0.060 0.010)
5 TYP.
0.66 0.013 (0.026 0.005) 0.30 MIN (0.012 MIN)
8 MAX 0 MIN 2.16 0.13 (0.085 0.005)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
6-115

▲Up To Search▲

Price & Availability of INA10386

	To Download INA10386 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .