Part Number Hot Search : 
BPC25 LS400 16LH08 10030 092315 B2201 00HST 20ADTR2
Product Description
Full Text Search
 

To Download STK4352 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Ordering number: EN 1228C
Thick Film Hybrid IC
STK4352 AF Power Amplifier (7W + 7W min, THD = 1.0%)
Features
* Small and slim package with 25.5mm height. * Capable of guaranteeing substrate temperature 125C, thereby reducing heat sink. * Excellent cost performance.
Package Dimensions
unit: mm
4032
[STK4352]
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max j-c Tj TC Tstg ts VCC = 27V, RL = 8, Po = 7W, f = 50Hz Pin 4 to 7, 12 One power transistor Conditions Ratings 39 7 150 125 -30 to +125 2 Unit V C/W C C C s
Recommended Operating Conditions at Ta = 25C
Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings 27 8 Unit V
SANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
61197HA (ID) / 8058MO / 2033KI, TS No. 1228--1/6
STK4352
Operating Characteristics at Ta = 25C, VCC = 27V, RL = 8, Rg = 600, VG = 40dB, at specified Test
Circuit (based on Sample Application Circuit).
Parameter Quiescent current Output power PO (2) Total harmonic distortion Frequency response Input impedance Output noise voltage THD fL, fH ri VNO Symbol ICCO PO (1) Conditions VCC = 33V THD = 1.0%, f = 1kHz THD = 1.0%, f = 40Hz to 20kHz Po = 0.1W, f = 1kHz Po = 0.1W, +0 dB -3 40 to 50k 110k 0.8 min 20 7 3.5 0.5 typ 60 max 120 Unit mA W W % Hz mVrms
Po = 0.1W, f = 1kHz VCC = 33V, Rg = 10k
Notes.
Unless otherwise specified for the power supply at the time of test, use the constant voltage power supply. When testing the available time for load short-circuit and output noise voltage, use the specified transformer as shown right. The output noise voltage is the peak value on the mean value indicating rms reading (VTVM), and should not involve impulse noise.
Specified Transformer Power Supply (Equivalent to RP-22)
Equivalent Circuit
No. 1228--2/6
STK4352
Sample Application Circuit: 7W min 2-channel AF power amplifier
Inoput voltage, Vi - mV
Total harmonic distortion, THD - %
Output power, Po - W
Output power, Po - W
Total harmonic distortion, THD - %
Output power, Po - W
Output power, Po - W
Frequency, f - Hz
No. 1228--3/6
Quiescent current, Icco - mA
Input impedance, ri - k
Voltage gain, VG - dB
Frequency, f - Hz
Frequency, f - Hz
Supply voltage, VCC - V Output power, Po - W Voltage gain, VG - dB Frequency, f - Hz Supply voltage, VCC - V Quiescent current,IIcco AmA Current drain, CC - -
Quiescent current, Icco--V Neutral voltage, VN mA
STK4352
Output noise voltage, VNO - mVrms
Power supply ripple voltage, Vrp - mVrms
No. 1228--4/6
Current drain, ICC - A
Load Short current, Ishort - A
Output noise voltage, VNO - mVrms
Signal source resistance, Rg -
Supply voltage, VCC - V
Frequency, f - Hz IC Power dissipation, Pd - W Neutral voltage, VN - V Output power, Po - W Operating substrate temperature, Tc - C Quiescent current, Icco - mA
STK4352
Thermal resistance of heat sink, - C/W
Area of heat sink, S - cm2
No. 1228--5/6
STK4352
0.2V / div
0.5s / div
1V / div
0.5s / div
s
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
s
s
This catalog provides information as of June, 1997. Specifications and information herein are subject to change without notice.
No. 1228--6/6


▲Up To Search▲   

 
Price & Availability of STK4352

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X