 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD29026A/HD29027/HD29028 Dual CCD Drivers ADE-205-001 (Z) 1st. Edition Jul. 1990 Description HD29026A, HD29027 and HD29028 include two on-chip drivers on a single chip, making it the optimal choice as a CCD driver. Operation is provided with a TTL level input, and output current of 1 A is available for both sink and source. Features * * * * High speed output rise and fall (20 ns typ) at load capacitance (CL ) of 1000 pF Direct drive of input block by TTL eliminates the need for external components Output swing voltage of 12 V; output current of 1 A available for both sink and source Output wave cross point 50% typ Ordering Information Product name HD29026AP HD29026AFP HD29027P HD29027FP HD29028P HD29028FP 12 V 6V Supply voltage 12 V Package 300 mil 8-pin plastic DIP (DP-8) 225 mil 8-pin plastic SOP (FP-8D) 300 mil 8-pin plastic DIP (DP-8) 225 mil 8-pin plastic SOP (FP-8D) 300 mil 8-pin plastic DIP (DP-8) 225 mil 8-pin plastic SOP (FP-8D) Function Table Input A H L Note: H: High level L: Low level Output Y L H HD29026A/HD29027/HD29028 Pin Arrangement NC 1 1A 2 GND 3 2A 4 (Top view) 8 NC 7 1Y 6 V CC 5 2Y Absolute Maximum Ratings Item Supply voltage HD29026A HD29027 HD29028 Input voltage Output peak current Operating temperature range Storage temperature range Junction temperature Total dissipation VI lO(peak) Ta Tstg Tj PT* 2 Symbol VCC* 1 Rating 15 10 15 7 1 -20 to +75 -65 to +150 150 DP-8 FP-8D 1 0.735 Unit V V A C C C W Notes: 1. If no value is specified, the voltage is defined by the GND pin. 2. Value when Ta = 25C. Heat dissipation is required for large-capacitance, high-frequency drivers, so derating of 8 mW/C (DP-8) and 5.9 mW/C (FP-8D) are required. (DP-8) 1.0 P T 0.6 (W) 0.5 0 -20 1.0 0.735 PT (W) 0.5 0.44 0 -20 (FP-8D) 0 25 Ta (C) 50 75 0 25 Ta (C) 50 75 Figure 1 Package Derating Curves 2 HD29026A/HD29027/HD29028 Recommended Operating Conditions Item Supply voltage HD29026A HD29027 HD29028 Operating temperature Symbol VCC VCC VCC Ta Min 8 4.5 8 -20 Typ 12 6 9 25 Max 13 8 13 75 C Unit V 3 HD29026A/HD29027/HD29028 Recommonded Operating Frequency Area HD29026A VCC = 13 (V) VCC = 12.0 (V) Ta = 75 (C) VCC = 9.0 (V) VCC = 8.0 (V) 1,000 Load Capacitance (pF) 750 500 250 0 0.5 1.0 3.0 5.0 10.0 20.0 Operating Frequency (MHz) HD29027 VCC = 8.0 (V) VCC = 6.0 (V) Ta = 75 (C) VCC = 4.5 (V) 1,000 Load Capacitance (pF) Load Capacitance (pF) 1.0 3.0 5.0 10.0 20.0 HD29028 VCC = 13 (V) VCC = 12.0 (V) Ta = 75 (C) VCC = 9.0 (V) VCC = 8.0 (V) 1,000 750 750 500 500 250 0 0.5 250 0 0.5 1.0 3.0 5.0 10.0 20.0 Operating Frequency (MHz) Operating Frequency (MHz) 4 HD29026A/HD29027/HD29028 Electrical Characteristics (Ta = -20 to +75C) Item Input voltage Symbol VIH VIL Output voltage VOH VOL Input current I IH HD29026A/28 I IL HD29027 Supply current HD29026A HD29027 HD29028 HD29026A HD29027 HD29028 Input current Input clamp voltage II VIK I CCL I CCH Min 2.0 -- VCC-1 -- -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max -- 0.6 -- 0.5 20 -100 -200 12 20 15 20 30 25 100 -1.5 A V VI = 7 V I IN = -18 mA mA A V VIL = 0.6 V, IOH = -1 mA VIH = 2.0 V, IOL = 1 mA VI = 2.7 V VI = 0.4 V Unit V Test Conditions Note: HD29026A/28: VCC = 8 to 13 V HD29027: V CC = 4.5 to 8 V Switching Characteristics (Ta = 25C) Item Fall propagation delay time HD29027 HD29028 HD29026A Symbol t PHL Min -- -- -- -- -- Rise propagation delay time HD29027 HD29028 HD29026A t PLH -- -- -- -- -- Typ 16 11 10 10 8 18 13 10 10 8 Max 20 15 15 15 13 25 20 15 15 13 ns CL = 1000 pF Unit ns Test Conditions CL = 1000 pF VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V 5 HD29026A/HD29027/HD29028 Switching Characteristics (Ta = 25C) (cont) Item Fall (transition) time HD29026A Symbol t THL Min -- -- HD29027 HD29028 -- -- -- HD29026A -- -- HD29027 HD29028 -- -- -- HD29026A -- -- HD29027 HD29028 -- -- -- Rise (transition) time HD29026A t TLH -- -- HD29027 HD29028 -- -- -- HD29026A -- -- HD29027 HD29028 -- -- -- HD29026A -- -- HD29027 HD29028 -- -- -- Typ 17 12 9 9 7 20 15 12 12 10 25 20 20 20 18 15 10 9 9 7 21 16 12 12 10 22 17 20 20 18 Max 21 16 14 13 14 23 18 17 17 15 40 35 25 25 23 20 15 14 14 12 25 20 17 17 15 30 25 25 25 23 CL = 1000 pF CL = 500 pF ns CL = 250 pF CL = 1000 pF CL = 500 pF Unit ns Test Conditions CL = 250 pF VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V VCC = 8 V VCC = 12 V VCC = 6 V VCC = 9 V VCC = 12 V 6 HD29026A/HD29027/HD29028 Switching Time Test Method Test circuit VCC Input Pulse Generator Zout = 50 Output CL Note: CL includes stray capacitance of probe and other tools Waveforms 10 ns 10 ns 90% 1.5 V Input 10% t PHL 90% 1.5 V 10% t PLH 3V 0V Output 90% 90% VOH 10% 10% VOL t TLH t THL Note: Input waveform: f = 1 MHz, duty cycle = 50% 7 HD29026A/HD29027/HD29028 Output Timing Characteristics (Ta = 25C) Item Output wave cross point Symbol VX Min 30 30 30 HD29027; VCC = 6 V, HD29028; VCC = 9, 12 V Typ 50 50 50 Max 70 70 70 Unit % Test Conditions CL = 250 pF CL = 500 pF CL = 1000 pF Output Timing Characteristics Test Method (HD29027/28) Test circuit VCC 1A 2A 1Y Pulse Generator Zout = 50 CL CL 2Y Note: CL includes stray capacitance of probe and other tools Waveform 10 ns 2A or 1A 90% 10% 90% 1.5 V 10% 90% 10% 10 ns 90% 1.5 V 10% 3V 1A or 2A 0V 1Y or 2Y 2Y or 1Y Note: 70% VX 30% 70% 30% 70% 30% 70% VX 30% V OH VOL Input waveform: f = 1 MHz, duty cycle = 50% 8 HD29026A/HD29027/HD29028 Output Timing Characteristics HD29027 VCC = 6 V Input GND 2 V/div Output GND 10 ns/div 9 HD29026A/HD29027/HD29028 HD29028 VCC = 9 V Input GND Output GND 2 V/div 10 ns/div VCC = 12 V Input GND Output GND Input 2 V/div 10 ns/div Output 5 V/div 10 ns/div 10 HD29026A/HD29027/HD29028 Typical Characteristic Curves Supply current vs. operating frequency (HD29026A) 80 80 C L = 1000 pF Ta = 25C V CC = 9 V 1 circuit operation T a = 25C C L = 1000 pF V CC = 12 V 1 circuit operation 500 pF Supply current (mA) 60 500 pF Supply current (mA) 60 40 40 250 pF 20 250 pF 0 pF 20 0 pF 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) 80 T a = 25C V CC = 9 V 2 circuit operations 80 T a = 25C V CC = 12 V 2 circuit operations Supply current (mA) Supply current (mA) 60 C L = 1000 pF 60 C L = 1000 pF 40 500 pF 250 pF 40 500 pF 250 pF 20 0 pF 20 0 pF 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) 11 HD29026A/HD29027/HD29028 Supply current vs. operating frequency (HD29027) 150 T a = 25C V CC = 6 V 1 circuit operation 150 T a = 25C V CC = 6 V 2 circuit operation Supply current (mA) Supply current (mA) 100 100 C L = 1000 pF C L = 1000 pF 500 pF 50 500 pF 250 pF 0 pF 50 250 pF 0 pF 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) 0 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) Supply current vs. operating frequency (HD29028) 100 Supply current (mA) Supply current (mA) 80 60 40 0 pF Ta = 25C V CC = 9 V 1 circuit operation C L = 1000 pF 100 80 60 40 0 pF T a = 25C C L = 1000 pF V CC = 9 V 2 circuit operation 500 pF 250 pF 500 pF 250 pF 20 0 20 0 0.1 0.2 0.5 1.0 2 5 10 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) Operating frequency (MHz) 12 HD29026A/HD29027/HD29028 100 Supply current (mA) Supply current (mA) 80 60 40 20 0 T a = 25C C L = 1000 pF V CC = 12 V 1 circuit operation 500 pF 250 pF 0 pF 100 80 60 40 20 0 T a = 25C C L = 1000 pF V CC = 12 V 2 circuit operation 500 pF 250 pF 0 pF 0.1 0.2 0.5 1.0 2 5 10 0.1 0.2 0.5 1.0 2 5 10 Operating frequency (MHz) Operating frequency (MHz) Cautions (HD29026A only) The short output rise and fall time, as well as the large output amplitude of this product tends to generate overshooting and undershooting. The connection of 5 to 15 damping resistance (RD) to the output as illustrated in figure 2 serves to increase the output rise and fall time, making it possible to reduce the chance of overshooting and undershooting. Figure 3 shows the characteristics that result for a damping resistance (RD) of 10 . VCC Input RD Output Pulse Generator Zout = 50 CL Note: CL includes stray capacitance of probe and other tools Figure 2 13 HD29026A/HD29027/HD29028 tTLH vs CL 40 30 t TLH (ns) 20 10 0 200 400 600 C L (pF) 800 1000 40 30 t TLH (ns) 20 10 0 200 400 600 C L (pF) 800 1000 Ta = 25 C VCC = 12 V Ta = 25 C VCC = 8 V tTHL vs CL 40 30 t THL (ns) 20 10 0 200 400 600 C L (pF) 800 1000 40 30 t THL (ns) 20 10 0 200 400 600 C L (pF) 800 1000 Ta = 25 C VCC = 12 V Ta = 25 C VCC = 8 V Figure 3 14 HD29026A/HD29027/HD29028 Package Dimensions Unit: mm 9.6 10.6 Max 8 5 1 0.89 4 1.3 2.54 Min 5.06 Max 1.27 Max 6.3 7.4 Max 7.62 0.1 Min 0.25 - 0.05 0 - 15 Hitachi Code JEDEC EIAJ Mass (reference value) + 0.10 2.54 0.25 0.48 0.10 DP-8 Conforms Conforms 0.54 g Unit: mm 4.85 5.25 Max 5 8 1 4 4.4 *0.22 0.05 0.20 0.04 2.03 Max 0.75 Max 0.25 6.50 + 0.15 - 1.05 0 - 8 0.10 0.10 1.27 *0.42 0.08 0.40 0.06 0.25 0.60 + 0.18 - 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Mass (reference value) FP-8D -- Conforms 0.10 g 15 HD29026A/HD29027/HD29028 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Copyright (c) Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 2.0 16 |
Price & Availability of HD29027FP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |