View FJH1102_181778.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FJH1102
Information Only Data Sheet
FINAL REVERSE CURRENT & FORWARD VOLTAGE LIMITS MIGHT BE INCREASED SLIGHTLY General Description: An Ultra Low Leakage Diode in the DO-35 package. The forward voltage is typically greater than 0.5 volts at 1.0 micro-ampere. This product is light sensitive, any damage to the body coating will affect the reverse leakage when exposed to light.
TA = 25OC unless otherwise noted
Ultra Low Leakage Diode
Absolute Maximum Ratings* Sym
Tstg TJ PD Storage Temperature Operating Junction Temperature Total Power Dissipation at TA = 25OC Linear Derating Factor from TA = R OJA Wiv IF 25OC
Parameter
Value
-55 to +200 175 250 1.67 300 25 150
Units
OC OC
mW mW/OC
OC/W
Thermal Resistance Junction-to-Ambient Working Inverse Voltage DC Forward Current (IF)
V mA
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired
0.500 Minimum 12.70 Typ 1.000
CATHODE BAND LOGO FJH 11 02 0.090 (2.28) Diameter 0.060 (1.53)
0.022 (0.558) Diameter 0.018 (0.458) Typ 20 mils
0.200 (5.08) 0.120 (3.05)
Electrical Characteristics SYM BV IR VF
TA = 25OC unless otherwise noted
CHARACTERISTICS Breakdown Voltage Reverse Leakage Forward Voltage
MIN 30
MAX
UNITS V IR IF IF IF IF
TEST CONDITIONS = = = = = 5.0 uA 25 V 1.0 uA 100 uA 1.0 mA 10 mA 0 V, f = 1.0 MHz
FJH1102 - Rev. A
100 500 650 750 600 750 850 1.10 3.5
pA mV mV mV V pF
VR =
CT
Diode Capacitance
VR =
(c) 1999 Fairchild Semiconductor Corporation
DO-35 Tape and Reel Data
DO-35 Packaging Configuration: Figure 1.0
Soabar Label Corrugated Outer Liner
White (Anode)
Red/Blue (Cathode)
T50R
TNR Options
Kraft Paper Wound Between Layers
DO-35 Packaging Information Table: Figure 2.0
DO-35 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size (inch diameter) Inside Tape Spacing (mm) Int Box Dimension (mm) Max qty per Box Weight per unit (gm)
Weight per Reel/Ammo (kg)
T50R TNR 10,000 13 52 30,000 0.137 2.23
T50A Ammo 5,000 52 50,000 0.137 0.800
Standard (no flow code) Bag 500 -
Soabar Label sample
P.O. No. TYPE REV PKG QTY Q.C. 10,000 IN5225A A2 MARK PART No. EC No. M.O. No. DATE OX5046F035 D9903 BLK-BRN
254x79x794 406x267x184 279x133x108 5,000 0.137 Bulk
MFD. UNDER US PAT 3.025.589 & OTHER US PATS & APPLICATIONS
Note/Comments
DO-35 Reel Dimensions: Figure 3.0
Soabar Label
REEL DIMENSIONS
ITEM DESCRIPTION D1 Reel Diameter Arbor Hole Diameter (Standard) D2 Core Diameter Flange to Flange Inner Width D1 D2 D3 W1 10.375 1.245 3.190 10.625 1.255 3.310 3.400 SYMBOL MINIMUM MAXIMUM
Note: All Dimensions are in inches
W1
D3
(c)2000 Fairchild Semiconductor International
September 1999, Rev. A
DO-35 Tape and Ammo Data, continued
DO-35 Ammo Packing Configuration: Figure 4.0
Soabar Label (on top of box)
254mm x 79mm x 79mm Intermediate Container (5,000 cap)
T50A Option
DO-35 Taping Dimension: Figure 5.0
G
H TAPING DIMENSIONS INCH
A 2.520 +0.066/ -0.027 2.0470.027 0.200 0.0157 0.047(max) 0.022(max) 0.027(max) 0.126(min) 0 0.027
MM
64.00 +1.69/ -0.69 52 0.69 5.08 0.40 1.2(max) 0.55(max) 0.69 3.2(min) 0 0.69
MILS
2519 +66.5/ -27.0 204727 200 15.7 47(max) 22(max) 27 126(min) 0 27
NOTES
Overall width
L1 F B A
B C D E
Inside Tape Spacing Component Pitch Component Misalignment Tape Mismatch Units in line w/ one another Lead amount between tapes Lead amount beyond tapes Delta between two leads
L2
F G H
E C D
L1-L2
DO-35 Bulk Packing Configuration: Figure 6.0
102mm x 76mm x 127mm Immediate Box (1,000 cap) 133mm x 95mm Anti-static bag (500/bag)
September 1999, Rev. A
DO-35 Package Dimensions
DO-35 (FS PKG Code D2)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in millimeters
Part Weight per unit (gram): 0.137
(c)2000 Fairchild Semiconductor International
March 2000, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM
DISCLAIMER
FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM
OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM
STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM
STAR*POWER is used under license
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H3

▲Up To Search▲

Price & Availability of FJH1102

	To Download FJH1102 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .