|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD- 93773A SMPS MOSFET IRF820A HEXFET(R) Power MOSFET Applications Switch Mode Power Supply (SMPS) l Uninterruptable Power Supply l High speed power switching l VDSS 500V RDS(on) max 3.0 ID 2.5A Benefits Low Gate Charge Qg results in Simple Drive Requirement l Improved Gate, Avalanche and dynamic dv/dt Ruggedness l Fully Characterized Capacitance and Avalanche Voltage and Current l Effective COSS specified (See AN 1001) l TO-220AB GDS Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torqe, 6-32 or M3 screw Max. 2.5 1.6 10 50 0.4 30 3.4 -55 to + 150 300 (1.6mm from case ) 10 lbf*in (1.1N*m) Units A W W/C V V/ns C Typical SMPS Topologies: l l Two transistor Forward Half Bridge and Full Bridge Notes through are on page 8 www.irf.com 1 5/8/00 IRF820A Static @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. 500 --- --- 2.0 --- --- --- --- Typ. --- 0.60 --- --- --- --- --- --- Max. Units Conditions --- V VGS = 0V, I D = 250A --- V/C Reference to 25C, ID = 1mA 3.0 VGS = 10V, ID = 1.5A 4.5 V VDS = VGS, ID = 250A 25 VDS = 500V, VGS = 0V A 250 VDS = 400V, VGS = 0V, TJ = 125C 100 VGS = 30V nA -100 VGS = -30V Dynamic @ TJ = 25C (unless otherwise specified) gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Parameter Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 1.4 --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- --- --- --- 8.1 12 16 13 340 53 2.7 490 15 28 Max. Units Conditions --- S VDS = 50V, ID = 1.5A 17 ID = 2.5A 4.3 nC VDS = 400V 8.5 VGS = 10V, See Fig. 6 and 13 --- VDD = 250V --- ID = 2.5A ns --- RG = 21 --- RD = 97,See Fig. 10 --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz, See Fig. 5 --- VGS = 0V, V DS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 400V, = 1.0MHz --- VGS = 0V, VDS = 0V to 400V Avalanche Characteristics Parameter EAS IAR EAR Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Typ. --- --- --- Max. 140 2.5 5.0 Units mJ A mJ Thermal Resistance Parameter RJC RCS RJA Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Typ. --- 0.50 --- Max. 2.5 --- 62 Units C/W Diode Characteristics Min. Typ. Max. Units IS ISM VSD trr Qrr ton Conditions D MOSFET symbol --- --- 2.5 showing the A G integral reverse --- --- 10 S p-n junction diode. --- --- 1.6 V TJ = 25C, IS = 2.5A, VGS = 0V --- 330 500 ns TJ = 25C, I F = 2.5A --- 760 1140 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) 2 www.irf.com IRF820A 10 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 10 I D , Drain-to-Source Current (A) 1 I D , Drain-to-Source Current (A) VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 1 0.1 4.5V 4.5V 0.01 0.1 20s PULSE WIDTH TJ = 25 C 1 10 100 0.1 1 10 20s PULSE WIDTH TJ = 150 C 100 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 10 3.0 ID = 2.5A TJ = 150 C 1 RDS(on) , Drain-to-Source On Resistance (Normalized) I D , Drain-to-Source Current (A) 2.5 2.0 TJ = 25 C 0.1 1.5 1.0 0.5 0.01 4.0 V DS = 50V 20s PULSE WIDTH 5.0 6.0 7.0 8.0 9.0 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRF820A 10000 VGS = 0V, f = 1 MHZ Ciss = C + Cgd, C gs ds SHORTED Crss = C gd Coss = C + Cgd ds 20 ID = 2.5A 1000 VGS , Gate-to-Source Voltage (V) VDS = 400V VDS = 250V VDS = 100V 15 C, Capacitance(pF) Ciss 100 10 Coss 10 5 Crss 1 1 10 100 1000 0 0 4 8 FOR TEST CIRCUIT SEE FIGURE 13 12 16 VDS, Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 10 100 OPERATION IN THIS AREA LIMITED BY RDS(on) ISD , Reverse Drain Current (A) I D , Drain Current (A) TJ = 150 C 10 10us 1 100us TJ = 25 C 1 1ms 0.1 0.4 V GS = 0 V 0.6 0.8 1.0 1.2 0.1 TC = 25 C TJ = 150 C Single Pulse 10 100 10ms 1000 10000 VSD ,Source-to-Drain Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRF820A 3.0 VDS VGS RG RD 2.5 D.U.T. + I D , Drain Current (A) 2.0 -VDD 10V 1.5 Pulse Width 1 s Duty Factor 0.1 % 1.0 Fig 10a. Switching Time Test Circuit VDS 90% 0.5 0.0 25 50 75 100 125 150 TC , Case Temperature ( C) 10% VGS Fig 9. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms 10 Thermal Response (Z thJC ) D = 0.50 1 0.20 0.10 0.05 0.1 0.02 0.01 P DM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 0.01 0.00001 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRF820A 1 5V 300 EAS , Single Pulse Avalanche Energy (mJ) TOP 250 VDS L D R IV E R BOTTOM ID 1.1A 1.6A 2.5A 200 RG 20V tp D .U .T IA S + V - DD A 150 0 .0 1 Fig 12a. Unclamped Inductive Test Circuit V (B R )D SS tp 100 50 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) IAS Fig 12b. Unclamped Inductive Waveforms QG Fig 12c. Maximum Avalanche Energy Vs. Drain Current 10 V QGS VG QGD V DSav , Avalanche Voltage ( V ) 700 650 Charge Fig 13a. Basic Gate Charge Waveform Current Regulator Same Type as D.U.T. 600 50K 12V .2F .3F D.U.T. VGS 3mA + V - DS 550 0.0 0.5 1.0 1.5 2.0 2.5 IAV , Avalanche Current ( A) IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit Fig 12d. Typical Drain-to-Source Voltage Vs. Avalanche Current 6 www.irf.com IRF820A Peak Diode Recovery dv/dt Test Circuit D.U.T + + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test + VDD Driver Gate Drive P.W. Period D= P.W. Period VGS=10V * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt VDD Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFET(R) Power MOSFETs www.irf.com 7 IRF820A Package Outline TO-220AB Dimensions are shown in millimeters (inches) 2.87 (.113) 2.62 (.103) 10.54 (.415) 10.29 (.405) 3.78 (.149) 3.54 (.139) -A6.47 (.255) 6.10 (.240) -B4.69 (.185) 4.20 (.165) 1.32 (.052) 1.22 (.048) 4 15.24 (.600) 14.84 (.584) 1.15 (.045) MIN 1 2 3 LE AD AS SIG NME NT S 1 - GA TE 2 - DR A IN 3 - S OU RC E 4 - DR A IN 14.09 (.555) 13.47 (.530) 4.06 (.160) 3.55 (.140) 3X 3X 1.40 (.055) 1.15 (.045) 0.93 (.037) 0.69 (.027) M BAM 3X 0.55 (.022) 0.46 (.018) 0.36 (.014) 2.54 (.100) 2X N OTE S : 1 DIMEN SIO NING & TO LE RA NC ING P E R AN SI Y 14.5M, 1982. 2 CO NT ROLLING DIM EN SIO N : INC H 2.92 (.115) 2.64 (.104) 3 O UTLINE CON F OR MS TO JED EC OUT LIN E T O-220A B. 4 HE AT SIN K & LE AD ME A SU RE ME NT S D O NO T INC LU DE B U RRS . Part Marking Information TO-220AB E X A M P L E : T H IS IS A N IR F 1 0 1 0 W IT H A S S E M B L Y LOT CO DE 9B1M A IN T E R N A T IO N A L R E C T IF IE R LO GO ASS EM BLY LOT CODE P ART NUM BER IR F 1 0 1 0 9246 9B 1M D ATE COD E (Y Y W W ) Y Y = YE A R W W = W EEK Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) Pulse width 300s; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS Starting TJ = 25C, L = 45mH RG = 25, IAS = 2.5A. (See Figure 12) ISD 2.5A, di/dt 270A/s, VDD V(BR)DSS, TJ 150C IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR EUROPEAN REGIONAL CENTRE: 439/445 Godstone Rd, Whyteleafe, Surrey CR3 OBL, UK Tel: ++ 44 (0)20 8645 8000 IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 (0) 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 011 451 0111 IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo 171 Tel: 81 (0)3 3983 0086 IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 (0)838 4630 IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673 Tel: 886-(0)2 2377 9936 Data and specifications subject to change without notice. 5/00 8 www.irf.com |
Price & Availability of IRF820A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |