 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v06.0503 HMC307QS16G 1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz Features 1 dB LSB Steps to 31 dB Single Control Line Per Bit +/- 0.5 dB Typical Bit Error Miniature QSOP-16 Package: 29.4 mm2 Typical Applications The HMC307QS16G is ideal for: 9 ATTENUATORS - SMT * Cellular * PCS, ISM, MMDS * Wireless Local Loop Functional Diagram General Description The HMC307QS16G is a broadband 5-bit GaAs IC digital attenuator in a 16 lead QSOP grounded base surface mount plastic package. Covering DC to 4 GHz, the insertion loss is less then 2 dB typical. The attenuator bit values are 1 (LSB), 2, 4, 8, and 16 dB for a total attenuation of 31 dB. Attenuation accuracy is excellent at 0.5 dB typical with an IIP3 of up to +44 dBm. Five bit control voltage inputs, toggled between 0 and -5V, are used to select each attenuation state at less than 50 uA each. A single Vee bias of -5V allows operation down to DC. This product is an excellent alternative to the HMC235QS16G. Electrical Specifications, TA = +25 C, Vee = -5V & VCTL= 0/Vee Parameter Insertion Loss Frequency DC - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 4.0 GHz DC - 4.0 GHz DC - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 4.0 GHz 11 11 10 8 Min. Typical 1.8 1.9 2.0 2.1 31 15 17 18 15 Max. 2.2 2.4 2.5 2.7 Units dB dB dB dB dB dB dB dB dB Attenuation Range Return Loss (RF1 & RF2, All Atten. States) Attenuation Accuracy: (Referenced to Insertion Loss) 1 - 20 dB States 21 - 31 dB States 1 - 15 dB States 16 - 31 dB States Input Power for 0.1 dB Compression Input Third Order Intercept Point (Two-tone Input Power = 0 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 2.7 GHz DC - 2.7 GHz 2.7 - 4.0 GHz 2.7 - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 4.0 GHz DC - 4.0 GHz 0.2 + 3% of Atten. Setting Max 0.3 + 5% of Atten. Setting Max 0.3 + 5% of Atten. Setting Max 0.6 + 10% of Atten. Setting Max 24 44 dB dB dB dB dBm dBm 140 160 ns ns 9 - 50 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v06.0503 HMC307QS16G 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz GaAs MMIC Insertion Loss 0 -0.5 INSERTION LOSS (dB) SUB-HARMONICALLY (Only Major States are Shown)- 25 GHz PUMPED MIXER 17 0 -5 +25 C 31 dB 8 dB 16 dB Return Loss RF1, RF2 -40 C RETURN LOSS (dB) -1 -1.5 -2 -2.5 +85 C -10 -15 -20 -25 -30 1 dB 9 ATTENUATORS - SMT 9 - 51 -3 -3.5 -4 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) -35 2, 4 dB -40 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Normalized Attenuation (Only Major States are Shown) 0 NORMALIZED ATTENUATION (dB) -5 -10 -15 -20 31 dB 16 dB Absolute Bit Error vs. Attenuation State 2 1.5 8 dB 2 dB 1 dB BIT ERROR (dB) 4 dB 3.5 GHz 0.1 GHz 2.4 GHz 1 1.9 GHz 0.9 GHz -25 -30 -35 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0.5 0 1 4 7 10 13 16 19 22 25 28 31 ATTENUATION STATE (dB) Absolute Bit Error vs. Frequency (Only Major States are Shown) 2 Relative Phase vs. Frequency (Only Major States are Shown) 100 80 RELATIVE PHASE (deg.) 31 dB 31 dB 1.5 BIT ERROR (dB) 16 dB 60 8 dB 1 1, 2 & 4 dB 40 16 dB 4 dB 8 dB 20 0 1, 2 dB 0.5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) -20 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v06.0503 HMC307QS16G 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz Truth Table Control Voltage Input Control Voltage V3 4 dB Low Low Low High Low Low High V4 2 dB Low Low High Low Low Low High V5 1 dB Low High Low Low Low Low High Attenuation State RF1 - RF2 Reference I.L. 1 dB 2 dB 4 dB Vee Range = -5.0 Vdc 10% 8 dB 16 dB 31 dB Max. Atten. Vee (VDC) -5.0 lee (Typ.) (mA) 3 lee (Max.) (mA) 6 State Low High Bias Condition 0 to -3V @ 70 uA Typ. Vee + 0.8V @ 5 uA Typ. 9 ATTENUATORS - SMT V1 16 dB Low Low Low Low Low High High V2 8 dB Low Low Low Low High Low High Note: Vee = -5V 10% Bias Voltage & Current Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. Application Circuit DC Blocking Capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 pF ~ 0.1 uF to allow lowest customer specific frequency to pass with minimal loss. R1= 5K Ohm is required to supply voltage to the circuit through either Pin 11 or Pin 14. Suggested Driver Circuit (One Circuit Required Per Bit Control Input) Simple driver using inexpensive standard logic ICs provides fast switching using minimum DC current. * Recommended value to suppress unwanted RF signals at V1 - V5 control lines. 9 - 52 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v06.0503 HMC307QS16G 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz Absolute Maximum Ratings Control Voltage (V1 - V5) Bias Voltage (Vee) Storage Temperature Operating Temperature RF Input Power (0.5 - 4 GHz) Vee - 0.5 Vdc -7.0 Vdc -65 to +150 C -40 to +85 C 9 ATTENUATORS - SMT NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. +26 dBm Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 9 - 53 v06.0503 MICROWAVE CORPORATION HMC307QS16G 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz Evaluation Circuit Board 9 ATTENUATORS - SMT * R2 - R6 = 100 Ohm. These resistors are optional and may be used to enhance decoupling of the RF path from the control inputs. The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. List of Material Item J1 - J2 J3 - J9 R1 R2 - R6 C1, C2 U1 PCB* Description PC Mount SMA Connector DC Pin 5k Ohm Resistor, 0402 Pkg. 100 Ohm Resistor, 0402 Pkg. 0402 Chip Capacitor, Select Value for Lowest Frequency of Operation HMC307QS16G Digital Attenuator 103395 Evaluation PCB 1.5" x 1.5" *Circuit Board Material: Rogers 4350 9 - 54 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v06.0503 MICROWAVE CORPORATION HMC307QS16G 1 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz Notes: 9 ATTENUATORS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 9 - 55 |
Price & Availability of HMC307QS16G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |