 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PAA110 Single Pole OptoMOS(R) Relays Load Voltage Load Current Max RON PAA110 400 150 22 Units V mA Description PAA110 is a 400V, 150mA, 22 2-Form-A relay. This performance leader provides high peak load voltage handling capability and improved peak load current handling. Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * VDE Compatible * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344 Ordering Information Part # PAA110 PAA110P PAA110PTR PAA110S PAA110STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Pin Configuration PAA110 Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-PAA110-R3.0 www.clare.com 1 PAA110 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 8002 +85 +125 +260 +220 mW mA A V mW VRMS C C C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation IL=150mA IF=5mA VR=5V IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 0.7 1.2 3 50 1.4 5 10 mA mA V V A pF VRMS 10ms IL=150mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz VL IL ILPK RON ILEAK TON TOFF COUT ICL 15 25 400 150 400 22 1 1 0.25 V mA mA A ms ms pF mA Conditions Symbol Min Typ Max Units *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 3.0 PAA110 PERFORMANCE DATA* 35 30 Device Count (N) PAA110 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 35 30 Device Count (N) PAA110 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) PAA110 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 13.1 13.7 14.3 14.9 15.5 16.1 On-Resistance () 441.5 450.5 459.5 468.5 477.5 486.5 Blocking Voltage (V) PAA110 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 150mADC) 25 Device Count (N) 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) PAA110 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) 25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 5 0 PAA110 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) Device Count (N) Device Count (N) 0.15 0.21 0.27 0.33 0.39 0.45 Turn-On (ms) PAA110 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) 25 20 15 10 5 0 0.05 0.07 0.09 0.11 0.13 0.15 Turn-Off (ms) Load Current (mA) PAA110 Typical Load Current vs. Temperature 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) Leakage (A) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 PAA110 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 20mA 10mA 5mA -20 0 20 40 60 80 100 Temperature (C) PAA110 Typical Blocking Voltage vs. Temperature 480 Blocking Voltage (VRMS) 475 Turn-On (ms) 470 465 460 455 450 -40 -20 0 20 40 60 80 100 Temperature (C) 1.50 1.25 1.00 0.75 0.50 0.25 0 -40 PAA110 Typical Turn-On vs. Temperature (Load Current = 150mADC) 0.140 0.120 Turn-Off (ms) 0.100 0.080 0.060 0.040 0.020 0 -40 PAA110 Typical Turn-Off vs. Temperature (Load Current = 150mADC) 5mA 10mA 20mA -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 3.0 www.clare.com 3 PAA110 PERFORMANCE DATA* PAA110 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop(V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) PAA110 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) 0.40 0.35 0.30 Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 0.25 0.20 0.15 0.10 0.05 0 PAA110 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.12 0.10 0.08 0.06 0.04 0.02 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA LED Forward Current (mA) 25 On-Resistance () 20 15 10 5 0 PAA110 Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) LED Current (mA) PAA110 Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 PAA110 Typical IF for Switch Dropout vs. Temperature (Load Current = 150mA) -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) 150 Load Current (mA) 100 50 0 -50 -100 PAA110 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC PAA110 Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 3.0 PAA110 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) 7.620 .254 (.300 .010) 3.302 (.130) 9.144 TYP. (.360) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 7.620 .127 (.300 .005) 7.239 TYP. (.285) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005 ) 7.620 .127 (.300 .005) 8 Pin DIP Surface Mount ("S" Suffix) 7.620 .254 (.300 .010) 4.445 .127 (.175 .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.525 .254 (.375 .010) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.498 .127 (.059 .005) 8.305 .127 (.327 .005) 8 Pin Flatpack ("P" Suffix) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.398 .127 (.370 .005) 2.159 TYP. (.085) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) .203 (.008) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 2.286 MAX. .635 .127 (.090) (.025) 8.763 .127 (.345 .005) 1.193 (.047) .787 (.031) Dimensions mm (inches) Rev. 3.0 www.clare.com 5 PAA110 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 12.090 (.476) 4.877 (.192) 1 8 16.002 .305 (.630 .012) 10.300 (.405) Embossed Carrier Top Cover Tape .050R TYP. 11.989 .102 (.472 .004) User Direction of Feed 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 1 8 16.002 .305 (.630 .012) 10.287 (.405) 12.090 (.476) 4.877 (.192) Embossed Carrier Top Cover Tape .050R TYP. 11.988 .102 (.472 .004) User Direction of Feed 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Dimensions mm (inches) 6 www.clare.com Rev. 3.0 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA110-R3.0 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/8/01 |
Price & Availability of PAA110
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |