![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CMM6004-AH Advanced Product Information February 2002 (1 of 6) Features 0.25 to 6.0 GHz Frequency Range 41 dBm Output IP3 1.7 dB Noise Figure 18.5 dB Gain 23 dBm P1dB LGA Package Single Power Supply Single Input Matching Applications Wireless Local Loop Transmit and Receive UNII Transmit and Receive Dual Band 802.11 WLAN Description The CMM6004-AH is a high dynamic range amplifier designed for applications operating within the 0.25 to 6.0 GHz frequency range. It is an ideal solution for numerous transmit and receive functions in wireless local loop (WLL) and UNII applications where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. It is an ideal solution when used as a driver amplifier in applications including cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; WLAN (wireless LAN) operating at 2.4 GHz; WLL (wireless local loop) operating at 3.5 GHz; and HiperLAN (high performance LAN) and U-NII (unlicensed national information infrastructure) operating from 5.0 to 6.0 GHz. The CMM6004-AH is packaged in a low-cost, space efficient, Land Grid Array (LGA) package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF and DC tested. With single input matching the part simplifies design by keeping board space and cost to a minimum. 0.25 to 6.0 GHz High Dynamic Range Amplifier Functional Block Diagram Electrical Characteristics Unless otherwise specified, the following specifications are guaranteed at room temperature in a Celeritek test fixture. Parameter Condition Min Typ Max Units Frequency Range Gain Input Return Loss Output IP3 Noise Figure Output P1dB Operating Current Range Supply Voltage Externally matched Externally matched 0.25 17.0 -24 38 1.5 22.5 175 18.5 -10 41 1.7 23.0 185 5.0 6.0 19.5 45 1.85 23.5 200 GHz dB dB dBm dB dBm mA V Notes: 1. T = 22C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. Thermal resistance = 50C/W. Absolute Maximum Ratings Parameter Rating Parameter Rating Parameter Rating Supply Voltage RF Input Power +6.0 V +13 dBm Storage Temperature Junction Temperature -40C to +125C 150C Operating Temperature -40C to +85C Operation of this device above any of these parameters may cause damage. 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6004-AH Application Circuit (836 MHz) Typical Performance (50 Ohm System) Frequency Gain Input Return Loss Output Return Loss OIP3 Noise Figure Bias 836 MHz 18 dB -23 dB -14 dB 40 dBm 1.75 dB Vds = 5V, Id = 175 mA Advanced Product Information - February 2002 (2 of 6) 836 MHz CMM6004-AH RF IN T1 50 20 T1 50 30 C3 4.7 pF OUTPUT MATCHING NETWORK RF OUT uu uu L1 6.8 nH INPUT MATCHING NETWORK uu uu C1 100 pF L2 22 nH Vcc 5V C4 100 pF C2 1.0 pF Circuit Board Parts List Part Type Reference Designator Description Inductor Inductor Capacitor Capacitor Capacitor L1 L2 C1, C4 C2 C3 0603, 6.8 nH 0603, 22 nH SMD 0805 NPO, 100 pF 0603, 1 pF SMD 0805, 50V 0.25 pF 4.7 pF Typical Performance IP3 measured with 2 tones at an output power of 5 dBm/tone separated by 10 MHz Gain, Input Return Loss and Output Return Loss vs Frequency 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6004-AH Advanced Product Information - February 2002 Application Circuit (2.1 GHz) Typical Performance (50 Ohm System) Frequency Gain Input Return Loss Output return Loss OIP3 Noise Figure Bias 2.1 GHz 15.8 dB -14 dB -16.5 dB 40 dBm 2.95 dB Vds = 5V, Id = 175 mA RF IN 2.1 GHz CMM6004-AH T1 50 33 C3 1.5 pF OUTPUT MATCHING NETWORK RF OUT (3 of 6) uu uu L1 1.8 nH INPUT MATCHING NETWORK uu uu C1 100 pF L2 22 nH Vcc 5V C4 100 pF C2 1.0 pF Circuit Board Parts List Part Type Reference Designator Description Inductor Inductor Capacitor Capacitor Capacitor L1 L2 C1, C4 C2 C3 0603, 0.3, 1.8 nH 0603, 22 nH SMD 0805 NPO, 100 pF 0603, 1 pF SMD 0603, 50V 0.1 pF 1.5 pF Typical Performance IP3 measured with 2 tones at an output power of 5 dBm/tone separated by 10 MHz Gain, Input Return Loss and Output Return Loss vs Frequency 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6004-AH Application Circuit (5.8 GHz) Typical Performance (50 Ohm System) Frequency Gain Input Return Loss Output Return Loss OIP3 Noise FIgure Bias 5.8 GHz 10.5 dB -11.5 dB -17.2 dB 40 dBm 3.8 dB Vds = 5V, Ids = 175 mA Advanced Product Information - February 2002 (4 of 6) 5.8 GHz CMM6004-AH RF IN C2 3.9 pF INPUT MATCHING NETWORK C3 1.0 pF T1 50 110 T1 50 125 C4 100 pF RF OUT uu uu Reference Designator Description C1 100 pF L1 6.8 nH Vcc 5V Circuit Board Parts List Part Type Inductor Capacitor Capacitor Capacitor L1 C1, C4 C2 C3 0603, 6.8 nH SMD 0805 NPO, 100 pF SMD 0805, 3.9 pF 0603, 1 pF Typical Performance Gain vs Temperature @ 5.8 GHz IP3 vs Temperature @ 5.8 GHz IP3 measured with 2 tones at an output power of 5 dBm/tone separated by 10 MHz Gain, Input Return Loss and Output Return Loss vs Frequency 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6004-AH Advanced Product Information - February 2002 Physical Dimensions (5 of 6) Dimensions in millimeters/inches Mounting Recommendation Board substrate: RO-4003 Thickness = 31 mil Ordering Information The CMM6004-AHis available in a surface-mount LGA package and devices are available in tape and reel. Part Number for Ordering Package CMM6004-AH LGA surface-mount power package in tape and reel PB-CMM6004-AH Evaluation Board with SMA connectors for CMM6004-AH 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6004-AH Notes Advanced Product Information - February 2002 (6 of 6) Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer. 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 |
Price & Availability of CMM6004-AH
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |