 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1.5KA6.8 THRU 1.5KA43A AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 43 Volts Case Style 1.5KA Peak Pulse Power - 1500 Watts FEATURES P A T E 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.038 (0.96) DIA. Designed for under the hood applications Plastic package has Underwriters Laboratory Flammability Classification 94V-0 1500W peak pulse power surge capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% Exclusive patented PARTM oxide passivated chip construction Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0 ps from 0 Volts to V(BR) for uni-directional For devices with V(BR)10V ID are typically less than 1.0A at TA=150C High temperature soldering guaranteed: 300C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension N T E D * MECHANICAL DATA Dimensions in inches and (millimeters) *Patent #'s 4,980,315 5,166,769 5,278,094 Available in uni-directional only Case: Molded plastic over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.045 ounce, 1.2 grams MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000s waveform (NOTE 1, FIG. 1) PPPM IPPM Minimum 1500 SEE TABLE 1 Watts Amps Peak pulse current at TA=25C with a 10/1000s waveform (NOTE 1, FIG. 3) Steady state power dissipation at TL=75C lead lengths 0.375" (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half Sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 100A (NOTE 3) Operating junction and storage temperature range PM(AV) IFSM VF TJ, TSTG 5.0 200 3.5 -65 to +185 Watts Amps Volts C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25C per Fig. 2 (2) Mounted on copper pad area of 0.8 x 0.8" (20 x 20mm) per Fig. 5 (3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minutes maximum 1/27/99 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (A) TJ=150C Maximum Reverse Leakage at VWM ID (A) Peak Pulse Current IPPM (NOTE 2) Test Current at IT (mA) Stand-off Voltage VWM (Volts) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) 1.5KA6.8 1.5KA6.8A 1.5KA7.5 1.5KA7.5A 1.5KA8.2 1.5KA8.2A 1.5KA9.1 1.5KA9.1A 1.5KA10 1.5KA10A 1.5KA11 1.5KA11A 1.5KA12 1.5KA12A 1.5KA13 1.5KA13A 1.5KA15 1.5KA15A 1.5KA16 1.5KA16A 1.5KA18 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10000 10000 5000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.076 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 (Cont'd) Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (A) TJ=150C Maximum Reverse Leakage at VWM ID (A) Peak Pulse Current IPPM (NOTE 2) Test Current at IT (mA) Stand-off Voltage VWM (Volts) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) 1.5KA18A 1.5KA20 1.5KA20A 1.5KA22 1.5KA22A 1.5KA24 1.5KA24A 1.5KA27 1.5KA27A 1.5KA30 1.5KA30A 1.5KA33 1.5KA33A 1.5KA36 1.5KA36A 1.5KA39 1.5KA39A 1.5KA43 1.5KA43A 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 NOTES: (1) V(BR) measured after IT applied for 300s = square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 RATINGS AND CHARACTERISTIC CURVES 1.5KA6.8 THRU 1.5KA43A FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - PULSE DERATING CURVE 100 PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % PPPM, PEAK PULSE POWER, kW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25C 100 10 75 50 1.0 25 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms td, PULSE WIDTH, sec. 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL FIG. 3 - PULSE WAVEFORM 20,000 10,000 TJ=25C f=1.0 MHZ VSIG=50mVP-P MEASURED at ZERO BIAS 150 tr=10sec. PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP IPPM PEAK PULSE CURRENT, % PEAK VALUE IPPM HALF VALUE - IPP 2 10/1000sec. WAVEFORM as DEFINED by R.E.A. CJ, CAPACITANCE , pF 100 50 1,000 MEASURED at STAND-OFF VOLTAGE, VWM td 0 0 1.0 2.0 t, TIME, ms 3.0 4.0 100 1.0 2 10 20 50 100 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION, WATTS 5.0 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT L 3.75 =0.375" (9.5mm) LEAD LENGTHS 60 HZ RESISTIVE OR INDUCTIVE LOAD 200 TL=75C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 50 2.5 0.8 x 0.8 x 0.040" (20 x 20 x 1mm) COPPER HEAT SINKS 1.25 0 0 25 50 75 100 125 150 175 200 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 TL, LEAD TEMPERATURE,C |
Price & Availability of 15KA30A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |