View MN39260F_240624.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CCD Area Image Sensor
MN39260FH
4.5 mm (type-1/4) 810k-pixel CCD Area Image Sensor
Overview
The MN39260FH is a 4.5 mm (type-1/4) interline transfer CCD (IT-CCD) solid state image sensor device. This device uses photodiodes in the optoelectric conversion section and CCDs for signal readout. The electronic shutter function has made an exposure time of 1/10 000 seconds possible. Further, this device has the features of high sensitivity, low noise, broad dynamic range, and low smear. This device has a total of 802 579 pixels (1 007 horizontal x 797 vertical) and provides stable and clear images with a resolution of 600 horizontal TV-lines and 420 vertical TV-lines. Part Number Size System Color or B/W PAL Color
(Top View)
Pin Assignments
V4 V3 V2 V1 GND TEST VDD
1 2 3 4 5 6 7
14 13 12 11 10 9 8
PT Sub H2 H1 R GND VO
MN39260FH 4.5 mm (type-1/4)
Features
* Effective pixel number 962 (horizontal) x 774 (vertical) * High sensitivity * Broad dynamic range * Low smear * Electronic shutter
Applications
* Camcorders * FA, OA cameras
Publication date: September 2001
SMD00004BEC
1
MN39260FH
Block Diagram
(4 columns OB + 962 columns valid area + 41 columns OB)
1
(2 dummies + OB11 + valid area 774 + OB12 )
Sub
13
V4 2 V3 3 4
V2
Photo diode
VO VDD GND
8 7 9
Output section
Vertical shift register
V1
Horizontal register (one dummy at the front, no dummy at the back)
GND 6 TEST *1 14 PT
5
10
11 H1
Description Pin No. Symbol 8 9 10 11 12
*1
R
*1 : TEST pin must be left open, because the pin outputs CCD internal bias voltage.
Pin Descriptions
Pin No. Symbol 1 2 3 4 5 6 7 V4 V3 V2 V1 GND TEST VDD Description Video output GND Reset pulse (RG) Horizontal register clock pulse 1 Horizontal register clock pulse 2 Substrate P-well for protection circuit Vertical shift register clock pulse 4 Vertical shift register clock pulse 3 Vertical shift register clock pulse 2 Vertical shift register clock pulse 1 GND TEST pin (OPEN) Power supply VO GND R H1 H2 Sub PT
13 14
Note) *1: TEST pin must be left open, because the pin outputs CCD internal bias voltage.
Device Parameter (H x V)
Parameter Pixel number
*1
Value 962 x 774 3.703 7 x 2.709 0 3.85 x 3.50
Unit pixel mm2 m2
Image sensing block dimension Pixel dimension
Note) *1: OB columns are not included.
2
SMD00004BEC
H2
12
MN39260FH
Absolute Maximum Ratings and Operating Conditions
Absolute maximum rating Parameter VDD VPT
*3, 4
Operating condition Min 14.5 -7.5 3.0 Typ 15.0 -7.0 0 3.3 Max 15.5 -6.5 3.6 Unit V V V V V 3.3 0 3.3 0 3.6 0.2 3.6 0.2 V V V V V 22.0 15.0 0 -7.0 0 -7.0 15.0 0 -7.0 0 -7.0 25 23.0 15.5 0.05 -6.5 0.05 -6.5 15.5 0.05 -6.5 0.05 -6.5 V V V V V V V V V V V C C
Lower limit - 0.2 -10.0 - 0.2 - 0.2 - 0.2
Upper limit 18 0.2
GND VR VH1 VH2 VSub
*2 *1
(Reference voltage) High-Low Bias High Low High Low 8 8 8
(Supplied internally) 3.0 - 0.2 3.0 - 0.2 (Supplied internally) 35 18 15 18 15 60 80 21.0 14.5 - 0.05 -7.5 - 0.05 -7.5 14.5 - 0.05 -7.5 - 0.05 -7.5 -9 -9 -9 -9 -10 -30
VSub VV1
*3, 4
High Middle Low
VV2 VV3
*3, 4
Middle Low
*3, 4
High Middle Low
VV4
*3, 4
Middle Low
Operating temperature Storage temperature
SMD00004BEC
3
MN39260FH
Absolute Maximum Ratings and Operating Conditions (continued)
Note) 1. Standard photo detecting condition Standard photo detecting condition stands for detecting image with a light source of color temperature of 2 856K, luminance of 1 050 cd/m2, and using a color temperature conversion filter LB-40 (HOYA), infrared cut filter CAW-500S with thickness 2.5 mm for a light path and with F8 lens aperture. The quantity of the incidental light to a photo-detecting surface under the above condition is defined as the standard quantity of light. 2. *1: VSub when using electronic shutter function
VSub H VSub (V) VSub L GND VSub (V) (Supplied internally)
* Sub pulse generates once every 1 V period.
*2: VSub supplied internally is the voltage suppressing the blooming generation at x500 light quantity relative to the standard light quantity. *3: Relation between VPT and VVL Set VPT under the following condition against VL of a vertical transfer clock waveform. VPT VL (VV1L to VV4L) - 0.2 < VV - VPT < 24.5 (V) *4: Absolute maximum ratings
Optical Characteristics
Parameter Carrier saturation output Sensitivity Vertical smear Symbol Sc So Sm J chart J chart F1.4, 1/32 ND 1/10 V chart, F1.4 Conditions Min 500 80 Typ 110 Max 0.01 Unit mV mV %
Note) The above-mentioned characteristics are the values on driving the device for the imaging stabilizer mode (1/60 seconds accumulation).
4
SMD00004BEC
MN39260FH
Timing Diagram
* High speed pulse timing
H1
50%
50%
50%
27.8 ns 3 ns
CCD output
R
50%
50%
1 ns 3 ns
10 ns 13.9 ns
Clamp pulse (DS1)
50%
50%
3 ns 3 ns
13.9 ns 3 ns
Sampling pulse (DS2)
50%
50%
4 ns 3 ns
13.9 ns 3 ns
SMD00004BEC
5
MN39260FH
Timing Diagram (continued)
* Rise time and fall time of each pulse
V1 , V3
0.9
0.9
0.1 0.9
0.1 0.9
0.1 300 ns V2 , V4 300 ns 300 ns
0.1 300 ns
0.9
0.9
0.1 300 ns H1 , H2 0.9 0.9 R
0.1 300 ns
0.9
0.9
0.1 8 ns
0.1 8 ns
0.1 6 ns
0.1 6 ns
6
SMD00004BEC
MN39260FH
Color Filter Arrays on CCD
774 773 Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G
8 7 6 5 4 3 2 1
Cy G Cy Mg Cy G Cy Mg 1
Ye Mg Ye G Ye Mg Ye G 2
Cy G Cy Mg Cy G Cy Mg 3
Ye Mg Ye G Ye Mg Ye G 4
Cy G Cy Mg Cy G Cy Mg 5
Ye Mg Ye G Ye Mg Ye G 6
Cy G Cy Mg Cy G Cy Mg 7
Ye Mg Ye G Ye Mg Ye G 8
Cy G Cy Mg Cy G Cy Mg
Ye Mg Ye G Ye Mg Ye G
961 962
Graph of Characteristics
CCD color filter spectral characteristics
1.2
Ye 1.0
0.8
Relative sensitivity
0.6 Cy Gr
0.4 Mg
0.2
0 400
450
500
550
600
650
700
750
800
Wavelength (nm) SMD00004BEC
7
MN39260FH
Package Dimensions (unit: mm)
* WDIP014-P-0400H
10.000.08 9.000.10 5.000.08 14 8
5.000.08 9.000.10 10.000.08
Reference plane
0.015
Valid pixel center
(0.60)
3.500.20 1.300.10
(1.19)
1.27
0.300.05
0.3 M
1
(2.50)
7
2-R0.40 (depth 0.30)
14
8
1. The center of the package is equal to the center of the effective pixel area. 2. The rotation angle of the effective pixel area: up to 1.0 degree 3. The distance from the bottom face of the package to the surface of the effective pixel area: 1.41 mm 0.1 mm 4. The tilt of the effective pixel area for the bottom face of the package: up to 25 m 5. Thickness of seal glass is 0.7 mm 0.1 mm, and the refractive index is 1.50. 6. Package weight: 0.55 g (typ.)
8
(2.50)
SMD00004BEC
3.30.15
(1.30)
0.250.05
(0.7)
1
7
10.160.25

▲Up To Search▲

Price & Availability of MN39260F

	To Download MN39260F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .