|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MKC 1862* Vishay Roederstein Metallized Polycarbonate Film Capacitor Related Document: IEC 60 384-6 MAIN APPLICATIONS: Storage, filter, timing and integrating circuits. L Max. Dimensions in mm W Max. Marking MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture H Max. 0.6 DIELECTRIC: Polycarbonate film ELECTRODES: Vacuum deposited aluminum 6.0-1 COATING: Flame retardant plastic case (UL-class 94 V-0), red, epoxy resin sealed pcm 0.4 0.8 0.4 CONSTRUCTION: Extended metallized film (refer to general information) TIME CONSTANT: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute LEADS: Tinned wire IEC TEST CLASSIFICATION: 55/100/56, according to IEC 60068 For C > 0.33F and UR > 100 VDC: 10,000 s minimum value (40,000 s typical value) OPERATING TEMPERATURE RANGE: - 55C to + 100C For C > 0.33F and UR 100 VDC: 5000 s minimum value (15,000 s typical value) CAPACITANCE RANGE: 0.01F to 10F CAPACITANCE DRIFT: Up to + 40C, 1% for a period of two years CAPACITANCE TOLERANCES: 20% (M), 10% (K), 5% (J) DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: At + 85C: UC = 1.0 UR At + 100C: UC = 0.8 UR RATED VOLTAGES (UR): 63 VDC, 100 VDC, 250 VDC, 400 VDC SELF INDUCTANCE: ~ 6 nH measured with 2mm long leads PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: 40 VAC, 63 VAC, 160 VAC, 200 VAC PULL TEST ON LEADS: 30 N in direction of leads according to IEC 60068-2-21 TEST VOLTAGE (ELECTRODE/ELECTRODE): 1.6 x UR for 2 s BEND TEST ON LEADS: 2 bends through 90 with half of the force used in pull test INSULATION RESISTANCE: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute RELIABILITY: Operational life > 300,000 h Failure rate < 1 FIT (40C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. Maximum pulse rise time dv/dt [V/s] For C 0.33F and UR > 100 VDC: 30,000 M minimum value (100,000 M typical value) For C 0.33F and UR 100 VDC: 15,000 M minimum value (50,000 M typical value) MAXIMUM PULSE RISE TIME PCM (mm) 10 15 22.5 27.5 63 VDC 17 9 6 5 100 VDC 23 13 8 6 250 VDC 38 21 13 10 400 VDC 61 33 20 16 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Please note: these capacitors are not recommended for new designs Document Number 26027 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com www.vishay.com 101 MKC 1862* Vishay Roederstein DISSIPATION FACTOR TAN MEASURED AT 1kHz 10kHz 100kHz C 0.1F 3 x 10 4 x 10 -3 -3 Metallized Polycarbonate, Related Document: IEC 60 384-6 0.1F < C 1.0F 3 x 10 4 x 10 -- Maximum values -3 -3 C > 1.0F 3 x 10-3 -- -- 10 x 10-3 CAPACI- CAPACITANCE TANCE CODE VOLTAGE CODE 06 63 VDC/ 40 VAC W H -- -- -- -- -- -- -- -- 9.0 9.5 10.5 10.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 L -- -- -- -- -- -- -- -- 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.5 PCM -- -- -- -- -- -- -- -- 10 10 10 15 15 15 15 22.5 22.5 22.5 27.5 W -- -- -- -- -- 4.0 4.0 5.5 6.5 5.5 6.5 7.5 8.5 7.5 8.5 10.5 11.5 13.5 15.0 VOLTAGE CODE 01 100 VDC/ 63 VAC H -- -- -- -- -- 9.0 9.0 10.5 11.5 10.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 23.5 24.5 L -- -- -- -- -- 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.5 31.5 31.5 PCM -- -- -- -- -- 10 10 10 10 15 15 15 15 22.5 22.5 22.5 27.5 27.5 27.5 W -- -- 4.0 4.0 4.0 5.5 5.5 5.5 6.5 7.5 7.5 8.5 8.5 11.5 11.5 13.5 16.5 -- -- VOLTAGE CODE 25 250 VDC/ 160 VAC H -- -- 9.0 9.0 9.0 10.5 10.5 10.5 12.5 13.5 15.5 16.5 16.5 20.5 20.5 23.5 29.5 -- -- L -- -- 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.5 31.5 31.5 31.5 -- -- PCM -- -- 10 10 10 10 15 15 15 15 22.5 22.5 22.5 27.5 27.5 27.5 27.5 -- -- W 4.0 4.0 4.0 5.5 5.5 5.5 6.5 8.5 7.5 8.5 10.5 11.5 13.5 -- -- -- -- -- -- VOLTAGE CODE 40 400 VDC/ 200 VAC H 9.0 9.0 9.0 10.5 10.5 10.5 12.5 14.5 15.5 16.5 18.5 20.5 23.5 -- -- -- -- -- -- L 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.5 31.5 -- -- -- -- -- -- PCM 10 10 10 10 15 15 15 15 22.5 22.5 22.5 27.5 27.5 -- -- -- -- -- -- 0.01 F 0.015 F 0.022 F 0.033 F 0.047 F 0.068 F 0.1 F 0.15 F 0.22 F 0.33 F 0.47 F 0.68 F 1.0 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10.0 F - 310 - 315 - 322 - 333 - 347 - 368 - 410 - 415 - 422 - 433 - 447 - 468 - 510 - 515 - 522 - 533 - 547 - 568 - 610 -- -- -- -- -- -- -- -- 4.0 4.5 5.5 5.5 6.5 7.5 8.5 7.5 8.5 10.5 11.5 Further C-values upon request RECOMMENDED PACKAGING LETTER CODE D G F W V G -- TYPE OF PACKAGING AMMO AMMO REEL REEL REEL AMMO BULK HEIGHT (H) (mm) 16.5 18.5 16.5 18.5 18.5 18.5 -- REEL DIAMETER (mm) S* S* 350 350 500 L* -- ORDERING CODE EXAMPLES MKC 1862-310/405-D MKC 1862-310/405-G MKC 1862-310/405-F MKC 1862-310/405-W MKC 1862-522/255-V MKC 1862-522/255-G MKC 1862-522/255 PCM 10 X X X X -- -- X PCM 15 X X X X X -- X PCM 22.5 - 27.5 -- -- -- -- X X X *S - box size 55 x 210 x 340mm (W x H x L) *L - box size 60 x 360 x 510mm (W x H x L) Please note: these capacitors are not recommended for new designs www.vishay.com 102 For technical questions, contact dc-film@vishay.com Document Number 26027 Revision 01-Dec-03 MKC 1862* Metallized Polycarbonate, Related Document: IEC 60384-6 V RMS V RMS 100 7 5 3 2 10 7 5 3 2 63 VDC 1 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] 1 102 2 3 5 7 103 Capacitance in F 0.2 2 0.4 Vishay Roederstein 0.0 10 .0 6.8 68 0.1 3.3 2.2 1.5 5 0.3 3 0.6 8 0.4 100 7 5 3 2 7 1.0 2.2 4.7 10 .0 10 7 5 3 2 100 VDC Capacitance in F 2 3 5 7 104 2 7 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency V RMS V RMS 1000 7 5 3 2 100 7 5 3 2 250 VDC 10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] 2.2 0.0 22 0.0 47 0.1 1.0 0.4 7 0.2 2 1000 7 5 3 2 100 7 5 3 2 10 102 400 VDC 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] Capacitance in F Capacitance in F 0.0 1 0.0 22 0.0 33 0.0 68 3 0.2 2 0. 1 1.0 0.6 8 0.3 Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency Z [] 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 0.01 23 5 7 0.1 23 10F 5 7 1.0 4.7F 2.2F 1.0F 0.47F 0.22F 23 1F 0.047F 5 7 10 0.022F 0.01F 23 5 7 100 MHz Impedance versus Frequency Z = f (f) (Lead length 2.0mm) Please note: these capacitors are not recommended for new designs Document Number 26027 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com www.vishay.com 103 |
Price & Availability of MKC1862 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |