View MLS9203-01815_268015.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Surface Mount Frequency Synthesizer
MLS9203-01815
MLS9203-01815
Surface Mount Frequency Synthesizer CDMA 1780 - 1850 MHz
Features
* * * * Integrated VCO/PLL Miniature SMT Package Low Phase Noise +5V Operation
12 Lead Package
12 11 10 9 8 7 DETAIL A
M/ A- COM LTD
DATE CODE
Description
The MLS9203-01815 synthesizer design integrates a high performance buffered VCO, PLL circuit and discrete loop filter in a surface mount package. The SMT packaging provides electrical shielding, easy PCB assembly and repeatable performance. The synthesiser is designed for use in PCS CDMA base stations and is optimised for coverage of the PCS band with 50 kHz step size and low phase noise. M/A-COM synthesizers are manufactured in an ISO 9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and quality over volume production quantities.
1 IDENT 2 3 4 5 6 0.2
12.0
PART NO.
0.6
6.0 MAX
0.8
1.0 2.0 TYP.in 5 POSITIONS 13.2 DETAIL A
Electrical Specifications , TA = +25C, VCC = +5V, F = 50 kHz, FR = 15 MHz (unless otherwise stated)
1
Parameter
Frequency Range (FOUT) Harmonic Output Spurious Output Phase Noise
4 2
Test Conditions
Over TOP Over TOP Phase comparison frequency (FOUT F) Reference breakthrough (FOUTFR) SSB at 1 kHz offset from carrier SSB at 10 kHz offset from carrier SSB at 100 kHz offset from carrier SSB at 1.25 MHz offset from carrier
Units
MHz dBm dBc dBc dBc dBc/Hz dBc/Hz dBc/Hz dBc/Hz ms mA mA
Min.
1780 -3.0 --------------------+4.75 +4.75 --3
Typ.
-----15 -80 -90 -70 -98 -118 -139 40 17 10 ----50 ---
Max.
1850 +3.0 -10 -60 ---65 -90 -110 ----20 15 +5.25 +5.25 --20
RF Output Power (POUT)3
Frequency Switching Time VCO Supply Current (ICC1) PLL Supply Current (ICC2)
5,6
Over FOUT, measured to within 500 Hz
VCO Supply Voltage (VCC1) PLL Supply Voltage (VCC2) Step Size (F)7 Reference Frequency (FR)
8
Recommended operating limit Recommended operating limit Recommended operating limit 0.5 to 2.0 Vpp sine wave into a.c. coupled CMOS. Recommended operating limit
V V kHz MHz
1. All specification limits are indicated values and apply over FOUT and for 50 load impedance. 2. Programming control is 3 wire serial CMOS or TTL levels, in accordance with National Semiconductor LMX 2325. 3. Output power window includes variation over operating temperature range (TOP) -40C to +85C and output frequency range (FOUT). 4. See plot for typical phase noise at other frequency offsets.
5. See plot for typical full band switching time measured to within other offsets from final frequency. 6. Integral PLL lock monitor output, TTL high locked, TTL low unlocked. 7. Device designed for loop bandwidth of 250Hz. 8. Reference frequency input impedance 10 k min.
V2.00
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.
14.6
Surface Mount Frequency Synthesizer
MLS9203-01815
Functional Configuration
Lead 1 2 3 4 5 6 Function Ground Clock Input VCC1 (VCO) PLL Lock Monitor Output RF Output Ground Lead 7 8 9 10 11 12 Function Ground Reference Frequency Input VCC2 (PLL) Data Input Strobe/Enable Input Ground
Absolute Maximum Ratings
Parameter VCO Supply Voltage (VCC1) PLL Supply Voltage (VCC2)
3 3
1,2
Absolute Maximum +6.5V +6.5V -0.3V to +6.5V -0.3V to +6.5V -45C to +125C See App Note M2032
Reference Frequency Voltage Data, Clock, Strobe Voltages Storage Temperature (TSTOR) Solder Assembly Temperature
Environmental Specifications
Devices are designed to function over the operating temperature range (TOP) of -40C to +85C and after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments.
1. Exceeding these limits may cause permanent damage. 2. Static sensitive, observe appropriate handling precautions. 3. An external series resistor and bypass capacitor will allow operation at higher supply voltage and will improve power supply decoupling and noise suppression.
Ordering Information
Synthesizers are available in either tape and reel or tube packaging. To order devices in tape and reel requires the suffix TR to be added to the part number, i.e. MLS9203-01815TR. Quantity 500 per 13 inch reel, see Application Note M2030.
Full Band Switching Time
600 500 TIME (ms) 400 300 200 100 0 0 100K0 k
Typical Performance
Phase Noise
-40 PHASE NOISE (dBc/Hz) -60 -80 -100 -120 -140 -160 10
100 1K 10K 100K 1M FREQUENCY OFFSET FROM CARRIER (Hz)
10M
1 10K 0k
1k 1K
1100 00
1 100
11
OFFSET FROM FINAL FREQUENCY (Hz)
Output Power vs Temperature
3.0 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 2.0
+ 85 C
Output Power vs Supply Voltage ( )
3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 1740
5 .2 5 V
1.0 0.0 -1.0 -2.0 -3.0
+25 C -4 0 C
5 .0 0 V
4 .7 5 V
1740
1760
1780
1800 1820 FREQUENCY (MHz)
1840
1860
1880
1760
1780
1800 1820 1840 FREQUENCY (MHz)
1860
1880
Phase Comparator Spurious
0 SPURIOUS LEVEL (dBc) -20 -40 -60 -80 -100 10 -100 0 SPURIOUS LEVEL (dBc) 0 -20 -40 -60 -80 -100
8 6 4 20 2 4 60 -80 0 -60 0 -40 0 -20 00 20 0 400 60 FREQUENCY OFFSET FROM CARRIER (kHz) 880 0 100 100
Reference Breakthrough Spurious
-20
-15
-10 -5 0 5 10 FREQUENCY OFFSET FROM CARRIER (MHz)
15
20
V2.00
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.

▲Up To Search▲

Price & Availability of MLS9203-01815

	To Download MLS9203-01815 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .