 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VISHAY LH1546AEF/ AEFTR Vishay Semiconductors 1 Form A Solid State Relay Features * * * * * * * * * * Current Limit Protection Isolation Test Voltage 3000 VRMS Typical RON 28 Load Voltage 350 V Load Current 120 mA High Surge Capability Linear, AC/DC Operation Clean Bounce Free Switching Low Power Consumption High Reliability Monolithic Receptor A1 K2 4S S 18221 S' 3 S1 * SMD lead available on tape and reel * Equivalent to CPC1035N Description The LH1546AEF (4 Pin SOP) is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated BCDMOS technology, is comprised of a photodiode array, switch control circuitry and MOSFET switches. In addition, it employs current-limiting circuitry which meets FCC 68.302 and other regulatory voltage surge requirements when overvoltage protection is provided. Agency Approvals * UL - File No. E52744 System Code O * BSI/BABT Cert. No. 8500 issue 2 Applications General Telecom Switching - On/off Hook Control - Ring Delay - Dial Pulse - Ground Start - Ground Fault Protection Instrumentation Industrial Controls See "Solid State Relays" (Application Note 56) Order Information Part LH1546AEF LH1546AEFTR Remarks Tubes, SOP-4 Tape and Reel, SOP-4 Absolute Maximum Ratings, Tamb = 25 C Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. SSR Parameter SSR output power dissipation (continuous) LED continuous forward current LED reverse voltage DC or peak AC load voltage IR 10 A IL 50 A Test condition Symbol Pdiss IF VR VL Value 550 50 6.0 350 Unit mW mA V V Document Number 83837 Rev. 1.2, 08-Mar-04 www.vishay.com 1 LH1546AEF/ AEFTR Vishay Semiconductors Parameter Continuous DC load current at 25 C, Bidirectional Ambient temperature range Storage temperature range Soldering temperature Isolation test voltage Isolation resistance t = 10 s max for 1.0 s VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C Tamb Tstg Tsld VISO RIO RIO Test condition Symbol Value 120 - 40 to + 85 - 40 to + 150 260 3000 1012 1011 VISHAY Unit mA C C C VRMS Electrical Characteristics, Tamb = 25 C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Input Parameter LED forward current, switch turn-on LED forward current, switch turn-off LED forward voltage Current limit Test condition IL = 100 mA, t = 10 ms VL = 300 V IF = 10 mA IF = 5.0 mA, t = 5.0 ms, VL = 6.0 V Symbol IFon IFoff VF Ilimit 0.2 1.0 230 Min Typ. 1.1 0.6 1.18 170 1.45 250 Max 2.0 Unit mA mA V mA Output Parameter ON-resistance, ac/dc: Pin 3 () to 4 () OFF-resistance Off-state leakage current Output capacitance Pin 3 to 4 Test condition IF = 5.0 mA, IL = 50 mA IF = 0 mA, VL = 100 V IF = 0 mA, VL = 100 V IF = 0 mA, VL = 350 V IF = 0 mA, VL = 1.0 V IF = 0 mA, VL = 50 V Symbol RON ROFF IO IO CO CO 55 10 0.5 Min Typ. 28 5000 0.32 200 1.0 Max 35 Unit G nA nA pF pF Transfer Parameter Capacitance (input-output) Turn-on time Turn-off time Test condition VISO = 1.0 V IF = 5.0 mA, IL = 50 mA IF = 5.0 mA, IL = 50 mA Symbol CIO ton toff Min Typ. 0.6 2.0 0.08 3.0 3.0 Max Unit pF ms ms www.vishay.com 2 Document Number 83837 Rev. 1.2, 08-Mar-04 VISHAY LH1546AEF/ AEFTR Vishay Semiconductors Typical Characteristics (Tamb = 25 C unless otherwise specified) 1.6 Change in Breakdown Voltage (%) Normalized to 25 C 8 6 4 2 0 -2 -4 -6 -8 -40 iLH1546AEF_05 LED Forward Voltage (V) 1.5 1.4 1.3 1.2 IF = 1.0 mA I = 2.0 mA 1.1 F IF = 5.0 mA IF = 10 mA IF = 20 mA IF = 50 mA 1.0 -40 iLH1546AEF_01 -20 0 20 40 60 80 -20 Ambient Temperature (C) 0 20 40 60 Ambient Temperature (C) 80 Fig. 1 LED Voltage vs. Temperature Fig. 4 Switch Breakdown Voltage vs. Temperature LED Forward Current for Switch Turn-on (%), Normalized to 25 C 100 80 60 40 20 0 -20 -40 -60 -40 -20 0 20 40 60 80 IL = 100 mA Capacitance (pF) 80 70 60 50 40 30 20 10 0 0 iLH1546AEF_06 20 40 60 80 100 iLH1546AEF_02 Ambient Temperature (C) Applied Voltage (V) Fig. 2 LED Current for Switch Turn-on vs. Temperature Fig. 5 Switch Capacitance vs. Applied Voltage 40 30 Change in RON (%) 100 IF = 5.0 mA IF = 50 mA Leakage (pA) T = 85 C 20 10 0 -10 -20 -30 -40 -40 0.1 -20 0 20 40 60 80 iLH1546AEF_07 10 T = 50 C 1.0 T = 70 C T = 25 C 0 50 100 150 200 250 300 350 400 iLH1546AEF_03 Ambient Temperature (C) Load Voltage (V) Fig. 3 ON-Resistance vs. Temperature Fig. 6 Leakage Current vs. Applied Voltage Document Number 83837 Rev. 1.2, 08-Mar-04 www.vishay.com 3 LH1546AEF/ AEFTR Vishay Semiconductors VISHAY 10000 1000 Leakage (pA) 100 10 1 0 iLH1546AEF_08 50 100 150 200 250 300 350 400 Load Voltage (V) Fig. 7 Leakage Current vs. Applied Voltage 80 60 Change in Toff (%) Normalized to 25 C IF =10 mA IF =8.0 mA IF = 6.0 mA 40 20 0 -20 -40 -60 -80 -40 -20 IF = 5.0 mA IF = 4.0 mA IF = 3.0 mA IF = 2.0 mA 0 20 40 60 80 iLH1546AEF_09 Ambient Temperature (C) Fig. 8 Turn-off Time vs. Temperature 7 6 5 Ton (ms) 4 3 2 1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) T = 85 C T = 25 C T = -45 C iLH1546AEF_10 Fig. 9 Turn-on Time vs. LED Current www.vishay.com 4 Document Number 83837 Rev. 1.2, 08-Mar-04 VISHAY Package Dimensions in Inches (mm) LH1546AEF/ AEFTR Vishay Semiconductors 4 3 0.190 (4.83) 0.170 (4.32) ISO Method A .100 (2.54) R .010 (.25) .014 (.36) .036 (.91) .200 (5.08) .290 (7.37) 0.220 (5.59) 0.200 (5.08) 0.020 (0.51) 0.010 (0.25) 0.004 (0.10) 0.000 (0.00) 0.008 (0.20) 0.004 (0.10) 40 10 .045 (1.14) 1 2 Pin one I.D. (on chamfer 0.184 (4.67) side of package) 0.034 (0.86) 0.024 (0.61) 0.080 (2.03) 0.075 (1.91) 0.018 (0.46) 0.014 (0.36) 0.105 (2.67) 0.095 (2.41) 0.164 (4.17) 6 Leads Coplanarity 0.004 (0.10) Max. i178030 0.025 (0.63) 0.015 (0.38) 0.284 (7.21) 0.264 (6.71) Document Number 83837 Rev. 1.2, 08-Mar-04 www.vishay.com 5 LH1546AEF/ AEFTR Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 6 Document Number 83837 Rev. 1.2, 08-Mar-04 |
Price & Availability of LH1546AEF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |