View 2SC2362K_305468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN572E
PNP/NPN Epitaxial Planar Silicon Transistors
2SA1016, 1016K/2SC2362, 2362K
High-Voltage Low-Noise Amp Applications
Package Dimensions
unit:mm 2003B
[2SA1016, 1016K/2SC2362, 2362K]
5.0 4.0 4.0
0.45 0.5 0.6 2.0 0.45 0.44 14.0 1 2 3
5.0
( ) : 2SA1016, 1016K
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions
1.3
1.3
1 : Emitter 2 : Collecor 3 : Base SANYO : NP
2SA1016K, 2SC2362K (-)150 (-)120 (-)5 (-)50 (-)100 400 125 -55 to +125
2SA1016, 2SC2362 (-)120 (-)100
Unit V V V mA mA mW
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)80V, IE=0 VEB=(-)4V, IC=0 VCE=(-)6V, IC=(-)1mA VCE=(-)6V, IC=(-)1mA VCB=(-)10V, f=1MHz 160* (110) 130 (2.2) 1.8 Conditions Ratings min typ max (-)1.0 (-)1.0 960* MHz pF Unit A A
* : The 2SA1016, K/2SC2362, K are classified by 1mA hFE as follows :
Rank hFE F 160 to 320 G 280 to 560 H 480 to 960
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
70502TN (KT)/71598HA (KT)/3187AT/3075KI/1313KI No.572-1/4
2SA1016, 1016K/2SC2362, 2362K
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Noise Level Noise Peak Level Symbol VCE(sat) V(BR)CBO V(BR)CEO V(BR)EBO VNO(ave) Conditions IC=(-)10mA, IB=(-)1mA IC=(-)10A, IE=0 IC=(-)10A, IE=0 [A1016, C2362] [A1016K, C2362K] (-)120 (-)150 (-)100 (-)120 (-)5 35 200 Ratings min typ max (-)0.5 Unit V V V V V V mV mV
IC=(-)1mA, RBE= [A1016, C2362] IC=(-)1mA, RBE= [A1016K, C2362K] IE=(-)10A, IC=0 VCC=30V, IC=1mA, Rg=56k, VG=77dB/1kHz
VNO(peak) VCC=30V, IC=1mA, Rg=56k, VG=77dB/1kHz
--12
IC -- VCE
2SA1016, 1016K
0A
12
IC -- VCE
2SC2362, 2362K
--10
Collector Current, IC - mA
--8
0A --30 A --250
--200
A
Collector Current, IC - mA
--35
10
250A
200A
150A
8
--6
A --150
--100A
--50A
6
--4
4
100A
50A
--2
2
0 0
IB=0
--10 --20 --30 --40 --50 ITR02951
0
IB=0
0 10 20 30 40 50 ITR02952
Collector-to-Emitter Voltage, VCE - V
--100
Collector-to-Emitter Voltage, VCE - V
100
IB -- VBE
2SA1016, 1016K VCE=--5V
IB -- VBE
2SC2362, 2362K VCE=5V
--80
80
Base Current, IB - A
Base Current, IB - A
0 --0.2 --0.4 --0.6 --0.8 --1.0 ITR02953
--60
60
--40
40
--20
20
0
0
0
0.2
0.4
0.6
0.8
1.0 ITR02954
Base-to-Emitter Voltage, VBE - V
5
Base-to-Emitter Voltage, VBE - V
5
fT -- IC
Gain-Bandwidth Product, fT - MHz 2SA1016, 1016K VCE=--6V
fT -- IC
2SC2362, 2362K VCE=6V
Gain-Bandwidth Product, fT - MHz
3 2
3 2
100 7 5
100 7 5
3 2 1.0
3 2 1.0
2
3
5
7
10
2
3
5
2
3
5
7
Collector Current, IC - mA
ITR02955
Collector Current, IC - mA
10
2
3
5
ITR02956
No.572-2/4
2SA1016, 1016K/2SC2362, 2362K
1000 7 5 3
hFE -- IC
2SA1016, 1016K VCE=--6V
1000 7 5
hFE -- IC
2SC2362, 2362K VCE=6V
DC Current Gain, hFE
2
DC Current Gain, hFE
2 3 5 2 3 5 2 3 5
3 2
100 7 5 3 2 10 7 5 --0.1 --1.0 --10 --100 ITR02957
100 7 5 3 2
10 0.1
2
3
5
1.0
2
3
5
10
2
3
5
Collector Current, IC - mA
10 7 5
Collector Current, IC - mA
10 7 5
100 2 ITR02958
Cob -- VCB
2SA1016, 1016K f=1MHz
Output Capacitance, Cob - pF
Cob -- VCB
2SC2362, 2362K f=1MHz
Output Capacitance, Cob - pF
3
3
2
2
1.0
1.0
7 --1.0
2
3
5
7
--10
2
3
5
7 1.0
2
3
5
7
10
2
3
5
Collector-to-Base Voltage, VCB -- V
100k
ITR02959 500
Collector-to-Base Voltage, VCB -- V
7 100 ITR02960
Contour of NF
2SA1016, 1016K f=10Hz f=1Hz VCE=--6V
4dB
PC -- Ta
dB 12
Signal Source Resistance, Rg -
5 3 2 10k
Collector Dissipation, PC - mW
400
15
dB
8dB
6K 01 2K , 1 36 16 , 2 10 2 A 36 2S SC2 2
5 3 2
300
1.0k 5 3 2
6 8d dB B 15 dB dB
12
2 4d dB B
NF
2dB
dB =1
6dB
200
100
0.1k --0.001 2 3
5 --0.01 2 3
5
--0.1 2 3
5
Collector Current, IC - mA
--1.0 2 3 5 --10 ITR02961
0
0
25
50
75
100
125
150 ITR02962
Ambient Temperature, Ta - C
Contour of NF
100k 100
Contour of NF
Signal Source Resistance, Rg - k
5 3 2 10 5 3 2 1.0 5 3
Signal Source Resistance, Rg -
5 3 2 10k 5 3 2 1.0k 5 3 2
2SA1016, 1016K f=100Hz f=1Hz VCE=--6V
4dB 2dB
2SC2362, 2362K VCE=6V f=10Hz
8d
dB 14
dB 15 B d 12 8dB
NF
B
B 6d B
6d 8B 12 dB 15 dB dB
1d 2d B B 4d B
.7 =0 NF
12
=1
dB
4d
dB
1dB
2d
dB
B
2d
4d
6dB
B
B
12
14
6d 8d B B
dB
2
dB
0.1k --0.001 2 3
5 --0.01 2 3
5
Collector Current, IC - mA
--0.1 2 3
5
--1.0 2 3 5 --10 ITR02963
0.1 1.0
23
5
10
23
5
Collector Current, IC - A
100 2 3
5
1000 2 3 5 10000 ITR02964
No.572-3/4
2SA1016, 1016K/2SC2362, 2362K
Contour of NF
100k
Contour of NF
100
Signal Source Resistance, Rg - k
Signal Source Resistance, Rg -
5 3 2 10k 5 3 2
2SA1016, 1016K f=1kHz f=1Hz VCE=--6V
1dB dB 0.7
5 3 2 10 5 3 2 1.0 5 3 2 0.1
2SC2362, 2362K f=1kHz VCE=6V
dB 15
8d
12
4dB B 2d
6dB
B
B 6d B 4d B 2d
dB B 8d
dB =1 NF
0.7
1d
4d
dB
NF
=1 d
B
1.0k 5 3 2
2d B
B
B
6 8d dB 12 B 15 dB dB
5 --0.01 2 3 5
6d
12 8dB dB 14 dB
23 5
4d 2 B dB B
0.1k --0.001 2 3
Collector Current, IC - mA
--0.1 2 3
5
--1.0 2 3 5 --10 ITR02965
1.0
10
23
5
Collector Current, IC - A
100
23
5 1000 2 3 5 10000 ITR02966
Contour of NF
100k
Signal Source Resistance, Rg -
5 3 2 10k 5 3 2 1.0k 5 3 2
2SA1016, 1016K f=10kHz f=1Hz VCE=--6V
dB 15 dB 12 B 8d
0.
1d
2d 4d B B
=0 NF
7d B
.5d
4dB 2dB 1dB dB 0.7
6dB
B
B
6d
B
12 dB
8d
B
5 --0.01 2 3 5 --0.1 2 3 5
0.1k --0.001 2 3
dB 15
Collector Current, IC - mA
--1.0 2 3 5 --10 ITR02967
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of July, 2002. Specifications and information herein are subject to change without notice.
PS No.572-4/4

▲Up To Search▲

Price & Availability of 2SC2362K

	To Download 2SC2362K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .