 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoisolators (Photocouplers) CNC1S101, CNZ3132, CNZ3133, CNZ3134 (ON3131, ON3132, ON3133, ON3134) Optoisolators Overview CNC1S101 is a DIL type 4-pin single-channel optoisolator which is housed in a small package. This optoisolator series also includes the twochannel CNZ3132, the three-channel CNZ3133, and the four-channel 3134. The CNC1S101 series has a number of good features, including high I/O isolation voltage and current transfer ratio (CTR), as well as high speed response. CNC1S101 LED Mark Unit : mm 5.2 max. 0.5 min. 4 3 2.54 min. 4.580.3 1 2 7.620.3 6.20.5 3.850.3 2.0 0 to 15 0 to 15 Features High current transfer ratio : CTR 100% High I/O isolation voltage : VISO = 5000 Vrms (min.) Fast response : tr = 2 s, tf = 3 s (typ.) Low dark current : ICEO 100 nA UL listed (UL File No. E79920) CNZ3132 LED Mark 1 2 3 4 7.620.3 6.20.5 5.2 max. 0.5 min. 5 6 7 8 9.660.3 Applications Switching power supply Computer terminal equipment System equipment, measuring equipment Telephones, copier, vending machines Televisions, VCRs, and other consumer electronics products Medical equipment and phsical and chemical equipment Signal transmission between circuits with different potentials and impedances 3.850.3 2.0 0.25 -0 +0.15 0 to 15 0 to 15 1,3: Anode 2,4: Cathode 5,7: Emitter 6,8: Collector CNZ3133 LED Mark 1 2 3 4 5 6 7.620.3 6.20.5 5.2 max. 0.5 min. 12 11 10 9 8 7 14.740.3 Pin Connection CNC1S101 1 2 4 3 3.850.3 2.0 0.25 -0 +0.15 CNZ3132 1 2 3 4 8 7 6 5 0 to 15 0 to 15 1,3,5: Anode 2,4,6: Cathode 7,9,11: Emitter 8,10,12: Collector CNZ3134 LED Mark 1 2 3 4 5 6 7 8 7.620.3 6.20.5 5.2 max. 0.5 min. 16 15 14 13 12 11 10 9 CNZ3133 1 2 3 4 5 6 12 11 10 9 8 7 Top View CNZ3134 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 3.850.3 2.0 0.25 -0 +0.15 0 to 15 0 to 1,3,5,7: Anode 15 2,4,6,8: Cathode 9,11,13,15: Emitter 10,12,14,16: Collector Top View Note) The part numbers in the parenthesis show conventional part number. 16-0.50.1 16-1.20.15 2.540.25 19.820.5 Top View Top View 12-0.50.1 12-1.20.15 2.540.25 8-0.50.1 8-1.20.15 2.540.25 4-0.50.1 4-1.20.15 2.540.25 1: Anode 2: Cathode 3: Emitter 4: Collector 0.25 -0 +0.15 Unit : mm 2.54 min. Unit : mm 2.54 min. Unit : mm 2.54 min. 1 CNC1S101,CNZ3132,CNZ3133,CNZ3134 Absolute Maximum Ratings (Ta = 25C) Parameter Reverse voltage (DC) Input (Light Forward current (DC) Power dissipation Collector current Output (Photo Collector to emitter voltage transistor) Emitter to collector voltage Collector power dissipation Total power dissipation Operating ambient temperature Storage temperature *1 *2 *3 Optoisolators (Photocouplers) Symbol Ratings VR IF IFP*1 PD*2 IC VCEO VECO PC*3 PT 6 50 1 75 50 80 7 150 200 Unit V mA A mW mA V V mW mW C C emitting diode) Pulse forward current Topr -30 to +100 Tstg -55 to +125 Pulse width 100 s, repeat 100 pps Input power derating ratio is 0.75 mW/C at Ta 25C. Output power derating ratio is 1.5 mW/C at Ta 25C. Electrical Characteristics (Ta = 25C) Parameter Input Forward voltage (DC) characteristics Capacitance between pins Collector cutoff current Collector to emitter voltage Output characteristics Collector to emitter capacitance Emitter to collector voltage DC current transfer ratio Isolation voltage, input to output Reverse current (DC) Symbol IR VF Ct ICEO CC CTR*1, *5 VISO VR = 3V IF = 50mA VR = 0V, f = 1MHz VCE = 20V 80 3 7 100 5000 0.7 1011 2 3 0.1 0.2 600 VCE = 10V, f = 1MHz VCE = 5V, IF =5mA t = 1 min., RH < 60% 1.35 15 5 100 Conditions min typ max 10 1.5 Unit A V pF nA V pF V % Vrms pF s s V VCEO IC = 100A VECO IE = 10A Isolation capacitance, input to output CISO f = 1MHz Transfer Isolation resistance, input to output RISO VISO = 500V characteristics Rise time tr*2, *4 VCC = 10V, IC = 2mA Fall time *1 DC *2 *3 *4 tf*3, *4 RL = 100 Collector to emitter saturation voltage VCE(sat) IF = 20mA, IC = 1mA current transfer ratio (CTR) is a ratio of output current against DC input current. tr : Time required for the collector current to increase from 10% to 90% of its final value tf : Time required for the collector current to decrease from 90% to 10% of its initial value Rise and fall time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) 90% 10% td tr tf ;; ;; 50 RL td : Delay time *5 CTR classifications General 100 to 600 R 100 to 300 S 200 to 600 Class CTR (%) 2 Optoisolators (Photocouplers) CNC1S101,CNZ3132,CNZ3133,CNZ3134 PC , PD -- Ta Collector power dissipation , power dissipation PC , PD (mW) 160 60 IF , IC -- Ta 10 2 IC -- VCE Ta = 25C PC 120 IF , IC (mA) IF, IC 50 IC (mA) IF = 50mA 10 20mA 10mA 5mA Forward current, collector current 40 80 PD 30 Collector current 20 1 2mA 40 10 0 - 30 0 20 40 60 80 100 120 0 - 30 0 20 40 60 80 100 10 -1 0 0.1 0.2 0.3 0.4 0.5 0.6 Ambient temperature Ta (C ) Ambient temperature Ta (C ) Collector to emitter voltage VCE (V) IC -- VCE 40 IF = 50mA 40mA 60 IF -- V F 160 Ta = 25C 50 IC -- Ta VCC = 5V IC (mA) 30 IF (mA) IC (%) Relative output current 30mA 25mA 20mA 15mA 12mA 10mA 9mA 8mA 7mA 6mA 5mA 120 IF = 10mA 5mA 10mA 1mA 5mA 40 1mA 80 Collector current 20 Forward current 30 20 10 40 0 0 8 16 24 4mA 3mA 2mA 1mA 32 40 10 0 0 0.9 1.0 1.1 1.2 1.3 1.4 0 - 50 0 50 100 Collector to emitter voltage VCE (V) Forward voltage VF (V) Ambient temperature Ta (C ) ICEO -- Ta 10 VCE = 30V 1 20V 10V 10 2 IC -- VCE(sat) Ta = 25C 10 2 VCC = 10V Ta = 25C IC -- I F IC (mA) IC (mA) Collector current ICEO (A) IF = 50mA 10 20mA 10mA 5mA 10 10 -1 Collector current Dark current 1 10 -2 1 2mA 10 -1 10 -3 10 -4 - 40 - 20 0 20 40 60 80 100 10 -1 0 0.1 0.2 0.3 0.4 0.5 0.6 10 -2 10 -1 1 10 10 2 Ambient temperature Ta (C ) Collector to emitter saturation voltage VCE(sat) (V) Forward current IF (mA) 3 CNC1S101,CNZ3132,CNZ3133,CNZ3134 Optoisolators (Photocouplers) VF -- Ta 1.6 10 2 tr -- IC VCC = 10V Ta = 25C 10 2 tf -- IC VCC = 10V Ta = 25C IF = 50mA VF (V) 1.2 10 10 500 100 RL = 1k 500 tr (s) 10mA 1mA 0.8 tf (s) RL = 1k Forward voltage 100 1 Rise time 0.4 10 -1 Sig.IN Sig. OUT 50 VCC Sig. OUT RL 90% 10% Fall time 1 10 -1 Sig.IN Sig. OUT 50 VCC Sig. OUT RL 90% 10% ;; ;; 0 - 40 - 20 0 20 40 60 80 100 10 -2 10 -1 tr tf 10 2 ;; 10 -2 10 -1 1 td tr 10 td tf 10 2 1 10 Ambient temperature Ta (C ) Collector current IC (mA) Collector current IC (mA) Frequency characteristics 10 Ta = 25C Measurement circuit of frequency characteristics +10V +10V 50k 100F 16V P (dB) Relative power output 1 ;; ; Sig.IN - 50 IF = 5mA 2mA 10 -1 Sig.OUT + 10 -2 5k 50 Sig.OUT 50 10 -3 1 10 10 2 10 3 Frequency f (kHz) 4 ;; ; ;; Caution for Safety Gallium arsenide material (GaAs) is used in this product. DANGER Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of ON3131
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |