|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BH2221FV Standard ICs 8bit 12ch D/A converter BH2221FV BH2221FV is an 8bit D/A converter for electronic adjustment. The 12-channel DC output voltage can be independently controlled by three-wire serial interface from micro-controller. The D/A converter can generate without loss by Rail-to-Rail output within the setting voltage. The built-in power ON reset circuit keeps the output state Low after the power is ON and prevents the unstable output state. !Applications The voltage adjustment for DVC, DSC etc. !Features 1) 8bit 12-channel D/A converters adopting R-2R system. 2) The full scale output voltage range : 2.7V5.5V. 3) 3-wire 12-bit serial interface. 4) POWER ON RESET circuit. 5) SSOP-B20 package. !Absolute maximum ratings (Ta=25C) Parameter Power supply voltage Maximum output voltage Storage temperature Power dissipation Symbol VCC VIN Tstg Pd Limits -0.3~+7.0 -0.3~VCC -55~+125 400 Unit V V C mW Reduced by 4mW for each increase in Ta of 1C over 25C. This product is not designed for protection against radioactive rays. !Recommended operating conditions (Ta=25C) Parameter VCC supply voltage VDD supply voltage Analog output source current Analog output sink current Operating temperature range Clock frequency Limit load capacitance Please set to VCC VDD. Symbol VCC VDD IOL IOH Topr FSCLK CL Min. 2.7 2.7 - - -20 - - Typ. - - - - - 1.0 - Max. 5.5 VCC 1.0 1.0 85 - 0.1 Unit V V mA mA C MHz F 1/6 BH2221FV Standard ICs !Block diagram NC 1 2 VCC R-2R DAC 8bitREG + DEC 8bitREG + DEC R-2R DAC 20 GND 19 AO2 VCC R-2R DAC AO3 VDD VCC AO4 3 4 5 6 7 8 VCC R-2R DAC 8bitREG + DEC 8bitREG + DEC 8bitREG + DEC 8bitREG + DEC 8bitREG + DEC 8bitREG + DEC VCC 8bitREG + DEC VDD 18 AO1 17 DI AO5 R-2R DAC AO6 R-2R DAC R-2R DAC R-2R DAC Serial interface 16 CLK 15 LD AO7 AO8 POWER_ON RESET 14 NC R-2R DAC AO9 R-2R DAC 8bitREG + DEC 13 AO12 VCC VCC VCC VDD AO10 9 R-2R DAC 8bitREG + DEC 8bitREG + DEC VDD R-2R DAC 12 AO11 11 VCC VDD 10 !Pin descriptions Pin No. Pin name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NC AO3 AO4 AO5 AO6 AO7 AO8 AO9 AO10 VDD VCC AO11 AO12 NC LD CLK DI AO1 AO2 GND In / Out - OUT OUT OUT OUT OUT OUT OUT OUT - - OUT OUT - IN IN IN OUT OUT - Common GND pin No connected Serial Load input pin Serial Clock input pin Serial Data input pin Analog output pins Power supply pin Power supply pin Analog output pins Functions No connected Analog output pins 2/6 BH2221FV Standard ICs !Electrical characteristics (unless otherwise noted, Ta=25C, VCC=3.0V, VDD=3.0V, RL=OPEN, CL=0pF) Parameter !Circuit operation (1) Power on reset This LSI has a power on reset circuit that sets an analog output to low level in VCC power stand-up. Please be sure that the time constant meets below condition, because the output is undefined when VCC power stand up too rapidly. Parameter VCC supply voltage rise time Power on reset voltage Symbol trVCC VPOR Min. 10 - Typ. - 1.9 Max. - - Unit ms V VCC=02.7V Conditions 3/6 BH2221FV Standard ICs (2) Conditions of operating timing (unless otherwise noted,Ta=25C, VCC=3.0V, VDD=3.0V) Parameter CLK L level pulse width CLK H level pulse width DI setup time DI hold time LD setup time LD hold time LD "H" level pulse width Analog output delay time Symbol tCLKL tCLKH tsDI thDI tsLD thLD tLDH tOUT Min. 200 200 30 60 200 100 100 - Typ. - - - - - - - - Max. - - - - - - - 300 Unit ns ns ns ns ns ns ns s CL=50pF, RL=10k Conditions tCLKL tCLKH CLK DI LAST DATA tsDI thDI tLDH tsLD thLD LD OUTPUT tOUT 4/6 BH2221FV Standard ICs (3) Command sending Control command is 3wire 12bit serial interface. (MSB first) Data is taken in with the rise edge of the CLK and output data is fixed in the LD high section. Data is maintained in the LD low section. LSB (LAST) Data set D0 D1 D2 D3 D4 D5 D6 D7 D8 MSB (FIRST) Channel select D9 D10 D11 *Data set D0 0 1 0 1 0 D1 0 0 1 1 0 D2 0 0 0 0 1 D3 0 0 0 0 0 D4 0 0 0 0 0 D5 0 0 0 0 0 D6 0 0 0 0 0 D7 0 0 0 0 0 GND (VCC-GND) / 256x1 (VCC-GND) / 256x2 (VCC-GND) / 256x3 (VCC-GND) / 256x4 Analog output voltage level 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (VCC-GND) / 256x254 (VCC-GND) / 256x255 *Channel select D8 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D9 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D10 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D11 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Adress select Don't Care AO1 AO2 AO3 AO4 AO5 AO6 AO7 AO8 AO9 AO10 AO11 AO12 Don't Care Don't Care Don't Care 5/6 BH2221FV Standard ICs !Operation notes (1) Regarding to the DNL & INL This item is guaranteed under below condition. Input code 02HFDH (2) Regarding to the setting of the each voltage Set the VCC, VDD to become the following condition. When not satisfied, unnecessary current flows or D/A conversion is not correct. VCC VDD And the minimum output voltage of this LSI is fixed to the GND level. (3) Regarding to the power on reset function This function operates detecting the voltage level of the VCC. So, if the voltage level of the VCC become less than power on reset voltage when working, it is a possibility that the outputs become reset condition. !External dimensions (Units : mm) 6.50.2 6.40.3 1.150.1 4.40.2 0.1 1 10 0.150.1 0.1 0.65 0.220.1 SSOP-B20 0.3Min. 20 11 6/6 |
Price & Availability of BH2221FV |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |