 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN851H PNP Epitaxial Planar Silicon Transistor 2SA1177 HF Amp Applications Use * Ideally suited for use in FM RF amplifiers, mixers, oscillators, converters, IF amplifiers. Package Dimensions unit:mm 2033A 4.0 [2SA1177] 3.0 2.2 Features * High fT (230MHz typ.) and small Cre (1.1 pF typ.). * Small NF (2.5dB typ.). 0.4 0.5 0.6 1.8 15.0 0.4 0.4 12 1.3 0.7 3 1.3 0.7 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Conditions 3.0 3.8 1 : Emitter 2 : Collector 3 : Base SANYO : SPA Ratings -30 -20 -5 -30 150 125 -55 to +125 Unit V V V mA mW C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Feedback Capacitance Base-to-Collector Time Constant Noise Figure Power Gain Rank hFE D 60 to 120 E 100 to 200 Symbol ICBO IEBO hFE fT Cre rbb, cc NF PG F 160 to 320 VCB=-10V, IE=0 VEB=-4A, IC=0 VCE=-6V, IC=-1mA VCE=-6V, IC=-1mA VCB=-6V, f=1MHz VCB=-6V, IC=-1mA, f=31.9MHz VCE=-6V, IC=-1mA, f=100MHz VCE=-6V, IC=-1mA, f=100MHz 60* 150 230 1.1 11 2.5 22 1.7 20 Conditions Ratings min typ max -0.1 -0.1 320* MHz pF ps dB dB Unit A A * : 2SA1177 is classified as follows according to hFE at 1mA. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 70502TN (KT)/71598HA (KT)/3187AT,/3075KI/1313/8182/2172KI, TS No.851-1/5 2SA1177 NF, PG Test Circuit to 5pF L3 L2 0.01F INPUT 50 to 30pF VCE L1 0.01F to 22pF to 22pF OUTPUT 50 to 30pF VBE L1 ; 1mmo plated wire 10mmo 5T, tapped at 2T from VBE side. L2 ; 1mmo plated wire 10mmo 7T, tapped at 1T from VCE side. L3 ; 1mmo enameled wire 10mmo 3T. --10 IC -- VCE --70A --60A --50A --120 --100 IB -- VBE VCE=--6V Collector Current, IC - mA --8 Base Current, IB - A --80 --60 --40 --20 0 --6 --40A --30A --4 --20A --2 --10A 0 0 IB=0 --2 --4 --6 --8 --10 ITR02968 0 Collector-to-Emitter Voltage, VCE - V 5 3 2 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE - V --1.0 ITR02969 hFE -- IC Gain-Bandwidth Product, fT - MHz 2 fT -- IC DC Current Gain, hFE VCE=--12V --6V --3V 1000 7 5 100 7 5 3 2 VCE=--12V --6 V --3V 3 2 100 7 --0.1 0 2 3 2 3 5 7 --10 5 7 --1.0 Collector Current, IC - mA 2 3 5 --1.0 2 ITR02970 3 5 7 2 --10 Collector Current, IC - mA 3 5 ITR02971 f=1MHz Base-to-Collector Time Constant, rbb'Cc - ps 10 7 5 Cre -- VCB 2 rbb' Cc -- IC f=31.9MHz Feedback Capacitance, Cre - pF 100 7 5 3 2 3 V CE 2 3 5 7 --1.0 2 3 5 7 --10 10 7 5 3 2 --0.1 =-3V 2 1.0 7 5 --0.1 V --6 V --12 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 2 3 5 Collector-to-Base Voltage, VCB -- V ITR02972 Collector Current, IC - mA ITR02973 No.851-2/5 2SA1177 --10 7 VCE(sat) -- IC 200 PC -- Ta Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 Collector Dissipation, PC - mW 3 2 160 150 --1.0 7 5 3 2 120 IC /I B= 20 10 5 80 --0.1 7 5 40 --0.1 2 3 2 3 5 7 --1.0 23 5 7 --10 Collector Current, IC - mA 2 3 5 0 0 20 40 60 80 100 120 140 ITR02974 2 5 3 2 Ambient Temperature, Ta - C ITR02975 5 3 2 Input Admittance yie -- IC f=1.0MHz VCE=--6V Output Admittance yoe -- IC f=1.0MHz VCE=--6V 1.0 7 5 100 7 5 c ie g ie goe - S gie - mS cie - pF 3 2 3 2 10 7 5 3 2 10 7 5 0.1 7 5 3 2 5 7 2 3 5 --1.0 Collector Current, IC - mA 7 10 7 5 3 c oe 3 2 --10 5 3 2 2 1.0 5 7 ITR02976 100 7 5 3 2 2 3 --1.0 Collector Current, IC - mA 5 7 --10 1.0 ITR02977 100 7 5 3 5 3 2 Input Admittance yie -- IC f=10MHz VCE=--6V Output Admittance yoe -- IC f=10MHz VCE=--6V gie - mS 7 5 3 2 cie - pF 1.0 g ie c ie 7 5 3 10 7 5 3 10 7 5 3 2 2 coe 2 0.1 5 7 2 3 --1.0 Collector Current, IC - mA 5 7 --10 10 1.0 5 7 ITR02978 2 3 5 --1.0 Collector Current, IC - mA 7 --10 1.0 ITR02979 100 7 5 3 2 Input Admittance yie -- IC f=100MHz VCE=--6V 100 7 5 3 2 5 3 2 Output Admittance yoe -- IC f=100MHz VCE=--6V 5 3 2 coe c ie goe - mS gie - mS 1.0 7 5 3 2 1.0 7 10 7 5 3 2 10 g ie 7 5 3 2 goe 5 3 2 1.0 3 5 7 2 3 --1.0 Collector Current, IC - mA 5 7 --10 1.0 0.1 3 5 7 ITR02980 2 3 --1.0 Collector Current, IC - mA 5 7 --10 0.1 ITR02981 No.851-3/5 coe - pF cie - pF coe - pF 100 goe - S g oe 2 coe - pF g oe 2SA1177 3 2 Forward Transfer Admittance yfe -- IC f=100MHz VCE=--6V 3 2 3 2 Reverse Transfer Admittance yre -- IC f=100MHz VCE=--6V 3 2 100 7 5 100 7 5 1.0 7 --cre 1.0 7 gfe - mS bfe - mS gre - mS 3 2 g fe 3 3 2 3 2 f --b e 2 10 7 5 3 2 3 5 2 3 --1.0 Collector Current, IC - mA 7 5 7 10 7 5 3 0.1 7 5 3 --gre 0.1 7 5 3 --10 5 3 2 2 3 5 7 ITR02982 10 7 5 3 2 2 3 --1.0 Collector Current, IC - mA 5 7 --10 ITR02983 10 7 5 3 2 5 3 2 Input Admittance yie -- VCE f=100MHz IC=--1.0mA Output Admittance yoe -- VCE f=100MHz IC=--1.0mA cie coe goe - mS gie - mS 10 7 5 3 2 10 7 5 1.0 7 5 1.0 goe 7 5 3 2 gie 3 3 2 2 1.0 7 2 3 5 7 --1.0 --10 Collector-to-Emitter Voltage, VCE - V 2 ITR02984 1.0 0.1 7 2 3 5 7 --1.0 --10 Collector-to-Emitter Voltage, VCE - V 2 ITR02985 0.1 5 3 2 Forward Transfer Admittance yfe -- VCE f=100MHz IC=--1.0mA gfe 5 3 2 5 3 2 Reverse Transfer Admittance yre -- VCE 5 f=100MHz IC=--1.0mA 3 2 --cre 1.0 1.0 7 5 3 gfe - mS bfe - mS gre - mS 10 7 5 3 2 10 7 5 3 2 7 5 3 2 --gre 2 0.1 7 0.1 7 7 2 3 5 7 --1.0 --10 Collector-to-Emitter Voltage, VCE - V 2 ITR02987 5 1.0 7 2 3 5 7 --1.0 --10 Collector-to-Emitter Voltage, VCE - V 2 ITR02986 1.0 5 Power Gain,PG - dB 32 PG, NF -- IC At specified circuit. f=100MHz VCE=--6V 28 PG 24 4 NF 2 3 5 7 2 3 --1.0 Collector Current, IC - mA 5 7 --10 0 ITR02988 Noise Figure,NF - dB 20 6 No.851-4/5 cre - pF --bfe coe - pF cie - pF cre - pF 5 5 2SA1177 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2002. Specifications and information herein are subject to change without notice. PS No.851-5/5 |
Price & Availability of 2SA1177
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |